Home of the Squeezebox™ & Transporter® network music players.
Results 1 to 2 of 2
  1. #1
    David Bonner
    Guest

    Please Help -- Problems with Player & Server Settings with5.3.0

    Roger that. I have an email into them, but figured I would give the forum a
    shot. Thanks for the leads though. Much appreciated.

    Reply to: DCBONNER (AT) alumni (DOT) unc.edu

    -----Original Message-----
    From: discuss-bounces (AT) lists (DOT) slimdevices.com
    [mailto:discuss-bounces (AT) lists (DOT) slimdevices.com] On Behalf Of kdf
    Sent: Monday, September 27, 2004 1:35 AM
    To: Slim Devices Discussion
    Subject: [slim] Please Help -- Problems with Player & Server Settings
    with 5.3.0

    You may want to contact SlimDevices support by phone or
    support (AT) slimdevices (DOT) com
    if you want a step by step walkthrough.

    -kdf

    Quoting David Bonner <DBONNER (AT) cox (DOT) net>:

    > I'll have to admit that I am not the most technically astute of all

    computer
    > users out there. With detailed instructions I can usually figure it out,
    > but I am definitely more of a Windows point and click user. That being

    said
    > I will try to give as much info as possible.
    >
    > Skin being used -- whatever the default is for the SlimServer software.
    > Never changed it -- I just needed something basic to play my tunes.
    >
    > On the firmware issue: This was the advice I was given, and before I

    follow
    > it I was wondering if someone could provide instructions for computer
    > morons. I was a bit confused when I read the following:
    >
    > > if you wish you back up on firmware, find the squeezebox.version file
    > >add a line:
    > >39 31

    >
    > >These numbers correspond to current fw, and desired fw respectively. I

    may
    > >be
    > >wrong on the exact version numbers, but you can see in the player ui

    under
    > >settings for the curent FW. The FW you want is the Squeezebox_xx.bin

    file
    > >with
    > >the highest number.

    >
    > Thanks for any help that anyone out there can provide.
    >
    > Reply to: DCBONNER (AT) alumni (DOT) unc.edu
    >
    > -----Original Message-----
    > From: discuss-bounces (AT) lists (DOT) slimdevices.com
    > [mailto:discuss-bounces (AT) lists (DOT) slimdevices.com] On Behalf Of kdf
    > Sent: Sunday, September 26, 2004 11:47 PM
    > To: Slim Devices Discussion
    > Subject: [slim] Please Help -- Problems with Player & Server Settings
    > with 5.3.0
    >
    > Quoting David Bonner <DBONNER (AT) cox (DOT) net>:
    >
    > > Guys,
    > >
    > >
    > >
    > > Since installing version 5.3.0 of the SlimServer software I am no longer
    > > able to access my player or server settings from the SlimServer screen

    on
    > my
    > > computer. When I tried to go back to version 5.2.1 my Squeezeboxes

    would
    > > display that a selection was playing, however no sound came through. I
    > > believe this is because the firmware update that I performed after
    > > installing version 5.3.0 is not compatible with the ver 5.2.1.

    Obviously,
    > > this presents a problem.

    >
    > if you wish you back up on firmware, find the squeezebox.version file
    > add a line:
    > 39 31
    >
    > These numbers correspond to current fw, and desired fw respectively. I

    may
    > be
    > wrong on the exact version numbers, but you can see in the player ui under
    > settings for the curent FW. The FW you want is the Squeezebox_xx.bin file
    > with
    > the highest number.
    >
    > > I have full functionality of the server/player
    > > settings when I go back to ver 5.2.1, but no sound. With 5.3.1 I can

    not
    > > access player/server settings. This is extremely frustrating. How do I
    > > correct this problem?
    > >

    >
    > > You are not authorized to view this page
    > >
    > >
    > > You might not have permission to view this directory or page using the
    > > credentials you supplied.

    >
    > for security reasons, the server checks the last page in the browser
    > (referrer)
    > to make sure only slimserver can send you into the settings pages. This
    > prevents outside pages from accessing your settings and doing bad things.
    > What
    > skin are you using? Are you trying to use a bookmark to get to settings?
    >
    > -kdf
    >

  2. #2
    NOT a Slim Devices Employee kdf's Avatar
    Join Date
    Apr 2005
    Posts
    9,493

    Please Help -- Problems with Player & Server Settings with5.3.0

    give it a try with squeezebox.version

    its just a text file, so open it with notepad or wordpad.
    likely it will be located in:
    c:\program files\slimserver\server\firmware
    the line you will most likely need to add is:
    38 29

    then save it, restart the server.
    press and holl brightness to do the firmware update.

    then undo your changes and restart the server
    if 29 was the wrong firmware, it will ask you to upgrade again
    press and hold again and you should be good to go with 5.2.1

    however, it would also be useful to actually get to the source of the problem
    you have had with 5.3.0, so that it can be possible to avoid having this happen
    to other users. Can you explain the exact links you were clicking that go you
    the error? if, after the error, you refresh the page, does it still block you?

    -kdf


    Quoting David Bonner <DBONNER (AT) cox (DOT) net>:

    > Roger that. I have an email into them, but figured I would give the forum a
    > shot. Thanks for the leads though. Much appreciated.
    >
    > Reply to: DCBONNER (AT) alumni (DOT) unc.edu
    >
    > -----Original Message-----
    > From: discuss-bounces (AT) lists (DOT) slimdevices.com
    > [mailto:discuss-bounces (AT) lists (DOT) slimdevices.com] On Behalf Of kdf
    > Sent: Monday, September 27, 2004 1:35 AM
    > To: Slim Devices Discussion
    > Subject: [slim] Please Help -- Problems with Player & Server Settings
    > with 5.3.0
    >
    > You may want to contact SlimDevices support by phone or
    > support (AT) slimdevices (DOT) com
    > if you want a step by step walkthrough.
    >
    > -kdf
    >
    > Quoting David Bonner <DBONNER (AT) cox (DOT) net>:
    >
    > > I'll have to admit that I am not the most technically astute of all

    > computer
    > > users out there. With detailed instructions I can usually figure it out,
    > > but I am definitely more of a Windows point and click user. That being

    > said
    > > I will try to give as much info as possible.
    > >
    > > Skin being used -- whatever the default is for the SlimServer software.
    > > Never changed it -- I just needed something basic to play my tunes.
    > >
    > > On the firmware issue: This was the advice I was given, and before I

    > follow
    > > it I was wondering if someone could provide instructions for computer
    > > morons. I was a bit confused when I read the following:
    > >
    > > > if you wish you back up on firmware, find the squeezebox.version file
    > > >add a line:
    > > >39 31

    > >
    > > >These numbers correspond to current fw, and desired fw respectively. I

    > may
    > > >be
    > > >wrong on the exact version numbers, but you can see in the player ui

    > under
    > > >settings for the curent FW. The FW you want is the Squeezebox_xx.bin

    > file
    > > >with
    > > >the highest number.

    > >
    > > Thanks for any help that anyone out there can provide.
    > >
    > > Reply to: DCBONNER (AT) alumni (DOT) unc.edu
    > >
    > > -----Original Message-----
    > > From: discuss-bounces (AT) lists (DOT) slimdevices.com
    > > [mailto:discuss-bounces (AT) lists (DOT) slimdevices.com] On Behalf Of kdf
    > > Sent: Sunday, September 26, 2004 11:47 PM
    > > To: Slim Devices Discussion
    > > Subject: [slim] Please Help -- Problems with Player & Server Settings
    > > with 5.3.0
    > >
    > > Quoting David Bonner <DBONNER (AT) cox (DOT) net>:
    > >
    > > > Guys,
    > > >
    > > >
    > > >
    > > > Since installing version 5.3.0 of the SlimServer software I am no longer
    > > > able to access my player or server settings from the SlimServer screen

    > on
    > > my
    > > > computer. When I tried to go back to version 5.2.1 my Squeezeboxes

    > would
    > > > display that a selection was playing, however no sound came through. I
    > > > believe this is because the firmware update that I performed after
    > > > installing version 5.3.0 is not compatible with the ver 5.2.1.

    > Obviously,
    > > > this presents a problem.

    > >
    > > if you wish you back up on firmware, find the squeezebox.version file
    > > add a line:
    > > 39 31
    > >
    > > These numbers correspond to current fw, and desired fw respectively. I

    > may
    > > be
    > > wrong on the exact version numbers, but you can see in the player ui under
    > > settings for the curent FW. The FW you want is the Squeezebox_xx.bin file
    > > with
    > > the highest number.
    > >
    > > > I have full functionality of the server/player
    > > > settings when I go back to ver 5.2.1, but no sound. With 5.3.1 I can

    > not
    > > > access player/server settings. This is extremely frustrating. How do I
    > > > correct this problem?
    > > >

    > >
    > > > You are not authorized to view this page
    > > >
    > > >
    > > > You might not have permission to view this directory or page using the
    > > > credentials you supplied.

    > >
    > > for security reasons, the server checks the last page in the browser
    > > (referrer)
    > > to make sure only slimserver can send you into the settings pages. This
    > > prevents outside pages from accessing your settings and doing bad things.
    > > What
    > > skin are you using? Are you trying to use a bookmark to get to settings?
    > >
    > > -kdf
    > >

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •