Home of the Squeezebox™ & Transporter® network music players.
Results 1 to 4 of 4
  1. #1
    Junior Member
    Join Date
    Jul 2009
    Posts
    1

    Connect MacMini direct to a SB3

    Anybody know how to directly connect a MacMini to a SB3 without going thru a network or if it's possible at all.

    Thanks
    garryfp

  2. #2
    Senior Member radish's Avatar
    Join Date
    Apr 2005
    Location
    Red Bank, NJ
    Posts
    5,052
    Sure, you should be able to use a regular ethernet cable (don't need a crossover as the Mac should be auto-sensing). You will need to set the IP, netmask etc manually on the SB3.

  3. #3
    Senior Member iPhone's Avatar
    Join Date
    Oct 2007
    Location
    Atlanta
    Posts
    3,295
    Quote Originally Posted by garryfp View Post
    Anybody know how to directly connect a MacMini to a SB3 without going thru a network or if it's possible at all.

    Thanks
    garryfp
    Hello and welcome to the Forum.

    I have not actually tried to do this, but I believe all it takes is a Mac Mini loaded with Squeeze Center and an Ethernet cross-over cable. One might need to enable the Mac to see the SB3, but again I wouldn't know until I tried it. Give the Ethernet cable a try and see what you see.
    iPhone
    Media Room:
    ModWright Platinum Signature Transporter, VTL TL-6.5 Signature Pre-Amp, Ayre MX-R Mono's, VeraStarr 6.4SE 6-channel Amp, Vandersteen Speakers: Quatro Wood Mains, VCC-5 Reference Center, four VSM-1 Signatures, Video: Runco RS 900 CineWide AutoScope 2.35:1, Vandersteen V2W Subwoofer

    Living Room:
    Transporter, ADCOM GTP-870HD, Cinepro 3K6SE III Gold, Vandersteen Model 3A Signature, Two 2Wq subs, VCC-2, Two VSM-1

    Office: Touch with Vandersteen VSM-1s
    Kitchen: Touch in-wall mount w/ Thiel Powerpoint 1.2s
    Bedroom: Squeezebox BOOM
    Bathroom: Squeezebox Radio
    Around the House: SliMP3, SB1, SB2, SB3
    Ford Thunderbird: SB Touch, USB drive
    Ford Expedition: SB Touch, USB drive

  4. #4
    Senior Member
    Join Date
    Nov 2005
    Posts
    153
    to reaffirm and add to what has already been posted;

    You will need to manually set the IP address on both the Mac Mini and the SB3.
    You can use a standard Ethernet cable as both devices have the capability to automatically determine whether to function straight through or crossover.

    You will not be able to connect to Internet streams or SqueezeNetwork unless you are using the wireless function of either device to connect to the Internet.
    SB Receiver, 3 x SB Boom, SB Touch, SqueezeCommander running on Samsung Galaxy S2 phone & Nexus 7 tablet.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •