Home of the Squeezebox™ & Transporter® network music players.
Page 51 of 51 FirstFirst ... 41495051
Results 501 to 504 of 504
  1. #501
    Senior Member
    Join Date
    May 2017
    Posts
    752
    Quote Originally Posted by madpatrick View Post
    Great. Will check it out

    One point for attention.
    In the configuration you can chosse 3 Quick selects, but my AVR has 4 Quick selects.
    Not a major issue, but maybe good to know that the newer AVR are having 4 Quick selects
    Mine AVR-X2500H also has 4 quick presets
    SqueezeBoxes: 1x Transporter (Living room) 1x SB2 (shed), 1x Radio (Kitchen), 1x Boom (Dining room), 1x piCorePlayer (jacuzzi), 1x piCorePlayer (Garden) 1x OSMC + Squeezelite (Movie room), 1x Touch (Study 2), few spare unit's (SB2, SB3, Boom, Touch)
    Server: LMS on Pi3B+ 8.1.2 on PcP 7.0.1
    Network: Draytek, Netgear Smart Switch 24p, Ubiquiti PoE, 3x Ubiquity

  2. #502
    Senior Member
    Join Date
    Oct 2014
    Location
    Pittsburgh PA
    Posts
    143
    Quote Originally Posted by edwin2006 View Post
    Mine AVR-X2500H also has 4 quick presets
    Good to know, although it seems like overkill seeing as each zone has its own set of Quick Selects. It's an easy code change though. Any other differences in recent models that might call for code changes? Additional zones?
    Sam

  3. #503
    Senior Member
    Join Date
    May 2017
    Posts
    752
    Quote Originally Posted by SamY View Post
    Good to know, although it seems like overkill seeing as each zone has its own set of Quick Selects. It's an easy code change though. Any other differences in recent models that might call for code changes? Additional zones?
    The AVR-X2500H has 1 main zone and another secondary zone (that I don't use)
    SqueezeBoxes: 1x Transporter (Living room) 1x SB2 (shed), 1x Radio (Kitchen), 1x Boom (Dining room), 1x piCorePlayer (jacuzzi), 1x piCorePlayer (Garden) 1x OSMC + Squeezelite (Movie room), 1x Touch (Study 2), few spare unit's (SB2, SB3, Boom, Touch)
    Server: LMS on Pi3B+ 8.1.2 on PcP 7.0.1
    Network: Draytek, Netgear Smart Switch 24p, Ubiquiti PoE, 3x Ubiquity

  4. #504
    Senior Member DavidBulluss's Avatar
    Join Date
    May 2013
    Location
    ADELAIDE, AUSTRALIA
    Posts
    438
    Quote Originally Posted by SamY View Post
    Good to know, although it seems like overkill seeing as each zone has its own set of Quick Selects. It's an easy code change though. Any other differences in recent models that might call for code changes? Additional zones?
    I think you may find that the upper level models with 9 channels have 3 zones, but not having one am not sure ;-) As an aside to the 4 Quick Selects, both my amps have 4 and one is fairly old but they only have 3 select buttons on the front fascia, QS 1, 2, & 3.
    Serverrpi3 pCP7.0.1 LMS8.1.2
    MediaUSB hard drive
    Lounge/dining areasSBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+)
    Family/kitchenSBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub
    Alfrescoas above zone 2 > Krix Tropix
    OthersSB Player/androids > Bose Soundlink Mini
    SBT/SB Player Remotes Squeeze Ctrl/androids

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •