Home of the Squeezebox™ & Transporter® network music players.
Results 1 to 2 of 2
  1. #1
    Kilgore Trout
    Guest

    Slimserver on Solaris

    Here is the output of a slimserver --d_stream. Does this look right?

    2004-01-26 23:55:08 00:04:20:04:07:4e new stream
    2004-01-26 23:55:08 00:04:20:04:07:4e Buffer full, starting playback
    2004-01-26 23:55:09 00:04:20:04:07:4e- play - Buffer full, need to poll to see if there is space
    2004-01-26 23:55:09 00:04:20:04:07:4e 1075179309.68496 Timeout on seq: 210
    2004-01-26 23:55:09 00:04:20:04:07:4e 1075179309.74237 Timeout on seq: 210
    2004-01-26 23:55:09 00:04:20:04:07:4e 1075179309.79959 Timeout on seq: 210
    2004-01-26 23:55:09 00:04:20:04:07:4e 1075179309.85761 Timeout on seq: 210
    ...........and so on.

    Kilgore Trout <diatrive (AT) yahoo (DOT) com> wrote:
    Ok, further oddity. I can stream with the remote streaming ability to a laptop and that works fine. I am using the same network setup that worked with my mac. But when playing to a Slimp3 it just dies after 5 seconds.

    ?!?
    Jeremy


    Kilgore Trout <diatrive (AT) yahoo (DOT) com> wrote:
    Oh here is the info.

    bragi [/usr/local/SlimServer_v2004-01-24] # uname -a
    SunOS bragi 5.9 Generic_112233-11 sun4u sparc SUNW,UltraAX-i2
    bragi [/usr/local/SlimServer_v2004-01-24] # perl -v
    This is perl, v5.8.0 built for sun4-solaris
    Copyright 1987-2002, Larry Wall
    Perl may be copied only under the terms of either the Artistic License or the
    GNU General Public License, which may be found in the Perl 5 source kit.
    Complete documentation for Perl, including FAQ lists, should be found on
    this system using `man perl' or `perldoc perl'. If you have access to the
    Internet, point your browser at http://www.perl.com/, the Perl Home Page.
    bragi [/usr/local/SlimServer_v2004-01-24] # perl
    use Time::HiRes
    print "blah \n";
    blah
    bragi [/usr/local/SlimServer_v2004-01-24] #


    Kilgore Trout <diatrive (AT) yahoo (DOT) com> wrote:
    So, I patched to the most recent set, upgraded perl and made sure that Time::HiRes works. Anyone else have any ideas?

    Jeremy

    dean blackketter <dean (AT) slimdevices (DOT) com> wrote:
    SlimServer should work with Perl as far back as 5.6.0, as long as you
    have the Time::HiRes module installed.

    (Mac OS X pre-10.3 used this version, so we have incentive to keep
    backwards compatibility.)

    -dean

    On Jan 26, 2004, at 2:15 PM, Steve Pawsey-Bowerman wrote:

    > Correct me if I'm wrong, but I though you need Perl 5.8 + to run
    > Slimserver. Mine runs on Red Hat, but I've played with it on Solaris 8
    > with Perl 5.8 and it was fine. The only reason I went back to RedHat
    > was because I couldn't get my 250gb HD working with my Ultra5. I've
    > also had it working on one of my E420's at work (but thats another
    > story.....!!)
    >
    > Steve
    > -----Original Message-----
    > From:discuss-bounces (AT) lists (DOT) slimdevices.com
    > [mailto:discuss-bounces (AT) lists (DOT) slimdevices.com]On Behalf Of! ! ! Kilgore
    > Trout
    > Sent:24 January 2004 23:19
    > To:discuss (AT) lists (DOT) slimdevices.com
    > Subject:[slim] Slimserver on Solaris
    >
    > Hi all,
    >
    > Is there anything special needed to get the slimserver running on
    > Solaris?
    > It runs for about 3-5 seconds then goes dead, every time you start a
    > song.
    >
    > Here are some stats.
    >
    > bragi [/usr/local/SlimServer_v5.0.1] # uname -a
    > SunOS bragi 5.9 Generic_112233-07 sun4u sparc SUNW,UltraAX-i2
    > bragi [/usr/local/SlimServer_v5.0.1] # perl -v
    > This is perl, v5.6.1 built for sun4-solaris-64int
    > (with 48 registered patches, see perl -V for more detail)
    >
    > Slimserver v 5.0.1 Slimp3s running firmware 2.2
    >
    > Here is the output from a slimserver --d_stream_v when it stops
    > playing.
    > 2004-01-24 17:04:24 00:04:20:04:07:4e 1074981864.31035 ! sending ! ! stream,
    > seq=106 len=1400 wptr=7700 state=play inflight=
    > 2004-01-24 17:04:24 00:04:20:04:07:4e 1074981864.31579 gotAck for seq:
    > 106 2004-01-24 17:04:24 ack: wptr:7700, rptr:10785, seq:106,
    > 2004-01-24 17:04:24 bytesinflight:1400 fullness:127702
    > 2004-01-24 17:04:24 00:04:20:04:07:4e 1074981864.32186 sending stream,
    > seq=107 len=1400 wptr=8400 state=play inflight=
    > 2004-01-24 17:04:24 00:04:20:04:07:4e 1074981864.32727 gotAck for seq:
    > 107 2004-01-24 17:04:24 ack: wptr:8400, rptr:10932, seq:107,
    > 2004-01-24 17:04:24 bytesinflight:1400 fullness:128808
    > 2004-01-24 17:04:24 00:04:20:04:07:4e sendEmptyChunk
    > 2004-01-24 17:04:24 00:04:20:04:07:4e 1074981864.39185 sending stream,
    > seq=108 len=0 wptr=9100 state=play inflight=
    > 2004-01-24 17:04:24 00:04:20:04:07:4e 1074981864.45069 sending stream,
    > seq=108 len=0 wptr=9100 state=play inflight=
    > 2004-01-24 17:04:24 00:04:20:04:07! ! :4e 1074981864.51068 sending str! !
    > ! eam, seq=108 len=0 wptr=9100 state=play inflight=
    > 2004-01-24 17:04:24 00:04:20:04:07:4e 1074981864.5707 sending stream,
    > seq=108 len=0 wptr=9100 state=play inflight=
    > 2004-01-24 17:04:24 00:04:20:04:07:4e 1074981864.6307 sending stream,
    > seq=108 len=0 wptr=9100 state=play inflight=
    > 2004-01-24 17:04:24 00:04:20:04:07:4e 1074981864.6907 sending stream,
    > seq=108 len=0 wptr=9100 state=play inflight=
    > 2004-01-24 17:04:24 00:04:20:04:07:4e 1074981864.75071 sending stream,
    > seq=108 len=0 wptr=9100 state=play inflight=
    > Any ideas??
    >
    > Thanks,
    > /jeremy
    >
    > Do you Yahoo!?
    > Yahoo! SiteBuilder - Free web site building tool.Try it!
    >

  2. #2
    Gadfly, Former Founder Slim Devices dean's Avatar
    Join Date
    Apr 2005
    Location
    San Francisco, CA
    Posts
    4,427

    Slimserver on Solaris

    If I remember correctly there were some problems with UDP support in
    some patches of Solaris. Here's a message from our old list archive:

    From: hww3 (AT) riverweb (DOT) com
    Subject: [slimp3-users] Solaris 12/02 & firmware 1.3 resolution (sort
    of)
    Date: January 15, 2003 7:51:21 PM PST
    To: slimp3-users (AT) yahoogroups (DOT) com
    Reply-To: slimp3-users (AT) yahoogroups (DOT) com

    Well, I've finally figured out what was probably causing the problem. I
    downgraded the sun system from Solaris 9 12/02 (update 2) to Solaris 9
    (update 0) and everything started working again. I confirmed this at
    work with different hardware running those two releases of the OS, and
    there the newer release also did not work. I don't know what Sun
    changed in the intervening 2 software updates, but it doesn't agree
    with the SliMP3 firmware/software.

    Bill

    On Tuesday, January 14, 2003, at 07:47 PM, Bill Welliver wrote:

    > The sunblade will happily (and correctly) service a slimp3 when it is
    > sending the traffic through a router. I found this out when my mac
    > started its own bootp server on a second subnet on its interface. The
    > slimp3 happily communicated with the solaris box on the same physical
    > network, through the mac (as its router).





    On Jan 26, 2004, at 9:05 PM, Kilgore Trout wrote:

    > Here is the output of a slimserver --d_stream. Does this look right?
    >
    > 2004-01-26 23:55:08 00:04:20:04:07:4e new stream
    > 2004-01-26 23:55:08 00:04:20:04:07:4e Buffer full, starting playback
    > 2004-01-26 23:55:09 00:04:20:04:07:4e- play - Buffer full, need to
    > poll to see if there is space
    > 2004-01-26 23:55:09 00:04:20:04:07:4e 1075179309.68496 Timeout on seq:
    > 210
    > 2004-01-26 23:55:09 00:04:20:04:07:4e 1075179309.74237 Timeout on seq:
    > 210
    > 2004-01-26 23:55:09 00:04:20:04:07:4e 1075179309.79959 Timeout on seq:
    > 210
    > 2004-01-26 23:55:09 00:04:20:04:07:4e 1075179309.85761 Timeout on seq:
    > 210
    > ..........and so on.
    >
    > Kilgore Trout <diatrive (AT) yahoo (DOT) com>wrote:
    > Ok, further oddity. I can stream with the remote streaming ability to
    > a laptop and that works fine. I am using the same network setup that
    > worked with my mac. But when playing to a Slimp3 it just dies after 5
    > seconds.
    >
    > ?!?
    > Jeremy
    >
    >
    > Kilgore Trout <diatrive (AT) yahoo (DOT) com>wrote:
    > Oh here is the info.
    >
    > bragi [/usr/local/SlimServer_v2004-01-24] # uname -a
    > SunOS bragi 5.9 Generic_112233-11 sun4u sparc SUNW,UltraAX-i2
    > bragi [/usr/local/SlimServer_v2004-01-24] # perl -v
    > This is perl, v5.8.0 built for sun4-solaris
    > Copyright 1987-2002, Larry Wall
    > Perl may be copied only under the terms of either the Artistic License
    > or the
    > GNU General Public License, which may be found in the Perl 5 source
    > kit.
    > Complete documentation for Perl, including FAQ lists, should be found
    > on
    > this system using `man perl' or `perldoc perl'. If you have access to
    > the
    > Internet, point your browser athttp://www.perl.com/, the Perl Home
    > Page.
    > bragi [/usr/local/SlimServer_v2004-01-24] # perl
    > use Time::HiRes
    > print "blah \n";
    > blah
    > bragi [/usr/local/SlimServer_v2004-01-24] #
    >
    >
    > Kilgore Trout <diatrive (AT) yahoo (DOT) com>wrote:
    > So, I patched to the most recent set, upgraded perl and made sure that
    > Time::HiRes works. Anyone else have any ideas?
    >
    > Jeremy
    >
    > dean blackketter <dean (AT) slimdevices (DOT) com>wrote:
    > SlimServer should work with Perl as far back as 5.6.0, as long as you
    > have the Time::HiRes module installed.
    >
    > (Mac OS X pre-10.3 used this version, so we have incentive to keep
    > backwards compatibility.)
    >
    > -dean
    >
    > On Jan 26, 2004, at 2:15 PM, Steve Pawsey-Bowerman wrote:
    >
    > > Correct me if I'm wrong, but I though you need Perl 5.8 + to run
    > > Slimserver. Mine runs on Red Hat, but I've played with it on Solaris

    > 8
    > > with Perl 5.8 and it was fine. The only reason I went back to RedHat
    > > was because I couldn't get my 250gb HD working with my Ultra5. I've
    > > also had it working on one of my E420's at work (but thats another
    > > story.....!!)
    > >
    > > Steve
    > > -----Original Message-----
    > > From:discuss-bounces (AT) lists (DOT) slimdevices.com
    > > [mailto:discuss-bounces (AT) lists (DOT) slimdevices.com]On Behalf Of! ! ! !

    > Kilgore
    > > Trout
    > > Sent:24 January 2004 23:19
    > > To:discuss (AT) lists (DOT) slimdevices.com
    > > Subject:[slim] Slimserver on Solaris
    > >
    > > Hi all,
    > >
    > > Is there anything special needed to get the slimserver running on
    > > Solaris?
    > > It runs for about 3-5 seconds then goes dead, every time you start a
    > > song.
    > >
    > > Here are some stats.
    > >
    > > bragi [/usr/local/SlimServer_v5.0.1] # uname -a
    > > SunOS bragi 5.9 Generic_112233-07 sun4u sparc SUNW,UltraAX-i2
    > > bragi [/usr/local/SlimServer_v5.0.1] # perl -v
    > > This is perl, v5.6.1 built for sun4-solaris-64int
    > > (with 48 registered patches, see perl -V for more detail)
    > >
    > > Slimserver v 5.0.1 Slimp3s running firmware 2.2
    > >
    > > Here is the output from a slimserver --d_stream_v when it stops
    > > playing.
    > > 2004-01-24 17:04:24 00:04:20:04:07:4e 1074981864.31035 ! ! sending !

    > ! stream,
    > > seq=106 len=1400 wptr=7700 state=play inflight=
    > > 2004-01-24 17:04:24 00:04:20:04:07:4e 1074981864.31579 gotAck for

    > seq:
    > > 106 2004-01-24 17:04:24 ack: wptr:7700, rptr:10785, seq:106,
    > > 2004-01-24 17:04:24 bytesinflight:1400 fullness:127702
    > > 2004-01-24 17:04:24 00:04:20:04:07:4e 1074981864.32186 sending

    > stream,
    > > seq=107 len=1400 wptr=8400 state=play inflight=
    > > 2004-01-24 17:04:24 00:04:20:04:07:4e 1074981864.32727 gotAck for

    > seq:
    > > 107 2004-01-24 17:04:24 ack: wptr:8400, rptr:10932, seq:107,
    > > 2004-01-24 17:04:24 bytesinflight:1400 fullness:128808
    > > 2004-01-24 17:04:24 00:04:20:04:07:4e sendEmptyChunk
    > > 2004-01-24 17:04:24 00:04:20:04:07:4e 1074981864.39185 sending

    > stream,
    > > seq=108 len=0 wptr=9100 state=play inflight=
    > > 2004-01-24 17:04:24 00:04:20:04:07:4e 1074981864.45069 sending

    > stream,
    > > seq=108 len=0 wptr=9100 state=play inflight=
    > > 2004-01-24 17:04:24 00:04:20:04:07! ! :4e 1074981864.51068 sending

    > str! !
    > > ! eam, seq=108 len=0 wptr=9100 state=play inflight=
    > > 2004-01-24 17:04:24 00:04:20:04:07:4e 1074981864.5707 sending stream,
    > > seq=108 len=0 wptr=9100 state=play inflight=
    > > 2004-01-24 17:04:24 00:04:20:04:07:4e 1074981864.6307 sending stream,
    > > seq=108 len=0 wptr=9100 state=play inflight=
    > > 2004-01-24 17:04:24 00:04:20:04:07:4e 1074981864.6907 sending stream,
    > > seq=108 len=0 wptr=9100 state=play inflight=
    > > 2004-01-24 17:04:24 00:04:20:04:07:4e 1074981864.75071 sending

    > stream,
    > > seq=108 len=0 wptr=9100 state=play inflight=
    > > Any ideas??
    > >
    > > Thanks,
    > > /jeremy
    > >
    > > Do you Yahoo!?
    > > Yahoo! SiteBuilder - Free web site building tool.Try it!
    > >

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •