Home of the Squeezebox™ & Transporter® network music players.
Results 1 to 3 of 3
  1. #1
    Junior Member
    Join Date
    Sep 2006
    Posts
    5

    Unhappy Slimserver sous XP: pb avec le service

    Bonjour,

    J'ai pas mal cherché sur les forums et les FAQ mais je n'ai rien trouvésur le problème que je rencontre.

    J'utilise XP Familial et je viens d'installer la dernière version de SlimServer. Le démarrage se passe comme prévu. Lorsque je double clic sur l'icone (à côté de l'horloge), les interfaces Web s'ouvrent bien.

    MAIS:
    1. Aucun fichier n'est détecté (0 albums, 0 songs, etc.)
    2. Dés que je clique quelque part, il ne se passe rien... C'est comme si le server plantait, mais aucune erreur pour autant.

    Si vous avez des éléments que je pourrais tester...

    Cordialement,

    Sébastien R.

  2. #2
    Junior Member
    Join Date
    May 2006
    Posts
    12
    A premier lancement, le serveur scanne ta librairie de mp3s.
    Cela peut ralentir ta machine si elle est pas dernier modele et donner l'impression d'un plantage.
    Tu as essaye de le laisser mouliner un moment?

  3. #3
    Junior Member
    Join Date
    Sep 2006
    Posts
    5
    En fait, je n'ai pas rééssayer, car entre temps, j'ai reçu un NAS (NSLU2), sur lequel j'ai installé la dernière version de UNSLUNG.

    Malheureusement, j'ai des erreurs MySQL à la compilation:

    ************************************************** *******
    # ./build-perl-modules.pl
    Welcome to the Slim Devices perl module installer.

    These packages are needed for SlimServer to function.
    You will need a C compiler (gcc), make, and perl installed.

    You will need development libraries for MySQL. eg: libmysqlclient

    You will need development libraries for expat. eg: libexpat1-dev

    *** Ignore any warnings about AppConfig. ***

    Please enter a perl binary to use (defaults to /usr/bin/perl)
    This must be the same perl binary that you ran this program with -->
    Please enter the path to your SlimServer directory (ex: /usr/local/slimserver) -->
    Please enter a directory to download files to --> /etc/slim-data
    Downloads will use wget to fetch tarballs.

    Downloading Compress-Zlib-1.41.tar.gz to: /etc/slim-data
    Uncompressing..
    Configuring..
    /usr/bin/perl Makefile.PL
    Up/Downgrade complete.
    Building..
    Library for Compress-Zlib-1.41.tar.gz is OK!

    Downloading DBI-1.50.tar.gz to: /etc/slim-data
    Uncompressing..
    Configuring..
    /usr/bin/perl Makefile.PL

    I see you're using perl 5.008008 on armv5b-softfloat-linux, okay.
    Remember to actually *read* the README file!
    Use 'make' to build the software (dmake or nmake on Windows).
    Then 'make test' to execute self tests.
    Then 'make install' to install the DBI and then delete this working
    directory before unpacking and building any DBD::* drivers.

    Building..
    In file included from DBIXS.h:31,
    from Perl.xs:5:
    dbipport.h:227:1: warning: "PERL_UNUSED_DECL" redefined
    In file included from DBIXS.h:19,
    from Perl.xs:5:
    /opt/lib/perl5/5.8.8/armv5b-linux/CORE/perl.h:163:1: warning: this is the location of the previous definition
    In file included from DBIXS.h:31,
    from DBI.xs:12:
    dbipport.h:227:1: warning: "PERL_UNUSED_DECL" redefined
    In file included from DBIXS.h:19,
    from DBI.xs:12:
    /opt/lib/perl5/5.8.8/armv5b-linux/CORE/perl.h:163:1: warning: this is the location of the previous definition
    DBI.xs: In function `dbih_clearcom':
    DBI.xs:1183: warning: unused variable `Perl___notused'
    DBI.xs: In function `dbih_get_fbav':
    DBI.xs:1332: warning: unused variable `Perl___notused'
    DBI.xs: In function `dbih_set_attr_k':
    DBI.xs:1514: warning: unused variable `Perl___notused'
    DBI.xs:1416: warning: unused variable `Perl___notused'
    DBI.xs: In function `dbih_get_attr_k':
    DBI.xs:1654: warning: unused variable `Perl___notused'
    DBI.xs: In function `log_where':
    DBI.xs:2081: warning: unused variable `Perl___notused'
    DBI.xs: In function `XS_DBI_dispatch':
    DBI.xs:2532: warning: dereferencing type-punned pointer will break strict-aliasing rules
    DBI.xs:2971: warning: unused variable `Perl___notused'
    Library for DBI-1.50.tar.gz is OK!

    Downloading DBD-mysql-3.0002.tar.gz to: /etc/slim-data
    Uncompressing..
    Configuring..
    PERL5LIB=/etc/slim-data/DBI-1.50/blib/lib:/etc/slim-data/DBI-1.50/blib/arch /usr/bin/perl Makefile.PL
    Can't exec "mysql_config": No such file or directory at Makefile.PL line 76.
    Can't exec "mysql_config": No such file or directory at Makefile.PL line 454.
    Can't exec "mysql_config": No such file or directory at Makefile.PL line 454.
    Can't exec "mysql_config": No such file or directory at Makefile.PL line 454.
    Can't exec "mysql_config": No such file or directory at Makefile.PL line 454.
    Can't exec "mysql_config": No such file or directory at Makefile.PL line 454.
    Can't exec "mysql_config": No such file or directory at Makefile.PL line 454.
    Failed to determine directory of mysql.h. Use

    perl Makefile.PL --cflags=-I<dir>

    to set this directory. For details see the INSTALL.html file,
    section "C Compiler flags" or type

    perl Makefile.PL --help
    There was a problem creating Makefile - exiting!
    ************************************************** *******


    >>> I created a new post: http://forums.slimdevices.com/showth...034#post142034
    Last edited by besen; 2006-10-02 at 08:29.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •