Receiver will not connect to Local library but will to Squeezebox.com

[uk144]

I have 4 Recievers. One did not connect recently so I reset it and configured it using the controller. Trying both ethernet and wifi.

Finally I got it working but only on squeezebox.com library. It will not connect to the local library (picoreplayer). However it will tun off using the controller. However it is not visible using The web interface of the media server. So it clearly has connected to the network but will not connect to the library. The firmware is 77 and I am running LMS v 8.1.1. Really pulling out my hair. Anyone got any ideas?

Logitech Media Server Version: 8.1.1 - 1610364019 @ Thu Jan 14 06:27:45 CET 2021
Hostname: piCorePlayer
Server IP Address: 192.168.1.238
Server HTTP Port Number: 9000
Operating system: piCore - EN - utf8
Platform Architecture: armv7l-linux
Perl Version: 5.32.1 - arm-linux-gnueabihf-thread-multi-64int
Audio::Scan: 1.02
IO::Socket::SSL: 2.071
Database Version: DBD::SQLite 1.58 (sqlite 3.22.0)
Total Players Recognized: 5

[garym]

are you sure it is connected to the same subnet. For example, your local network may be 192.168.1.1, but it may be connected to 192.168.0.1. Or you've connected it to the guest network of your local setup rather than your regular network. Also, what happens on this unit when you use the controller to go to "my music". At that point it should try to connect to any local LMS. Does it give you a message. Can you scroll down on that screen on the controller and see your rPi LMS?