Home of the Squeezebox™ & Transporter® network music players.
Page 4 of 5 FirstFirst ... 2345 LastLast
Results 31 to 40 of 45
  1. #31
    Senior Member Jeff07971's Avatar
    Join Date
    Aug 2011
    Location
    London, England
    Posts
    1,791
    Mine does the same at boot although my remote is Sony and does work.



    Code:
    [   16.308079] Registered IR keymap rc-rc6-mce
    [   16.325021] IR RC6 protocol handler initialized
    [   16.360083] rc rc0: gpio_ir_recv as /devices/platform/ir-receiver@19/rc/rc0
    [   16.360575] rc rc0: lirc_dev: driver gpio_ir_recv registered at minor = 0, raw IR receiver, no transmitter
    [   16.361064] input: gpio_ir_recv as /devices/platform/ir-receiver@19/rc/rc0/input0

    What is the output from "sudo ir-keytable" ?

    What is the output from "sudo ir-keytable -t" when a key on the remote is pressed ?

    Jeff

    Want a webapp ? Get SqueezeLite-X ! https://forums.slimdevices.com/showt...l=1#post903953

  2. #32
    Senior Member
    Join Date
    Jan 2022
    Location
    Switzerland
    Posts
    146
    Quote Originally Posted by Jeff07971 View Post
    Mine does the same at boot although my remote is Sony and does work.

    What is the output from "sudo ir-keytable" ?
    tc@pCP:~$ sudo ir-keytable
    Found /sys/class/rc/rc0/ (/dev/input/event0) with:
    Name: gpio_ir_recv
    Driver: gpio_ir_recv, table: rc-rc6-mce
    LIRC device: /dev/lirc0
    Supported kernel protocols: lirc rc-5 rc-5-sz jvc sony nec sanyo mce_kbd rc-6 sharp xmp imon
    Enabled kernel protocols: lirc rc-6
    bus: 25, vendor/product: 0001:0001, version: 0x0100
    Repeat delay = 500 ms, repeat period = 125 ms


    Quote Originally Posted by Jeff07971 View Post

    What is the output from "sudo ir-keytable -t" when a key on the remote is pressed ?
    oooups nothing. Tsop is on PIN25 and I saw values when LIRC was installed

  3. #33
    Senior Member Jeff07971's Avatar
    Join Date
    Aug 2011
    Location
    London, England
    Posts
    1,791
    Quote Originally Posted by PaulH View Post
    tc@pCP:~$ sudo ir-keytable
    Found /sys/class/rc/rc0/ (/dev/input/event0) with:
    Name: gpio_ir_recv
    Driver: gpio_ir_recv, table: rc-rc6-mce
    LIRC device: /dev/lirc0
    Supported kernel protocols: lirc rc-5 rc-5-sz jvc sony nec sanyo mce_kbd rc-6 sharp xmp imon
    Enabled kernel protocols: lirc rc-6
    bus: 25, vendor/product: 0001:0001, version: 0x0100
    Repeat delay = 500 ms, repeat period = 125 ms




    oooups nothing. Tsop is on PIN25 and I saw values when LIRC was installed

    Pin 25 is Ground, do you mean Pin 22 GPIO25 ?

    I'm not sure whats going on here its worked fine for me for many years and reinstalls.

    Are you sure theres nothing extra you've done over what you've told us ?

    Jeff

    Want a webapp ? Get SqueezeLite-X ! https://forums.slimdevices.com/showt...l=1#post903953

  4. #34
    Senior Member Jeff07971's Avatar
    Join Date
    Aug 2011
    Location
    London, England
    Posts
    1,791
    Theres something weird going on somewhere !

    I loaded your conf file

    Code:
    #table: Apple, type: nec
    0x87eee20b  KEY_UP
    0x87eee20d  KEY_DOWN
    0x87eee208  KEY_LEFT
    0x87eee207  KEY_RIGHT
    0x87eee20e  KEY_P
    0x87eee202  KEY_0
    and I get

    Code:
    tc@squeezebox-pcp-lounge:~$ sudo ir-keytable
    Found /sys/class/rc/rc0/ (/dev/input/event0) with:
            Name: gpio_ir_recv
            Driver: gpio_ir_recv, table: rc-rc6-mce
            LIRC device: /dev/lirc0
            Supported kernel protocols: lirc rc-5 rc-5-sz jvc sony nec sanyo mce_kbd rc-6 sharp xmp imon
            Enabled kernel protocols: lirc nec
            bus: 25, vendor/product: 0001:0001, version: 0x0100
            Repeat delay = 500 ms, repeat period = 125 ms

    Notice two enabled protocols

    Want a webapp ? Get SqueezeLite-X ! https://forums.slimdevices.com/showt...l=1#post903953

  5. #35
    Senior Member
    Join Date
    Jan 2022
    Location
    Switzerland
    Posts
    146
    Quote Originally Posted by Jeff07971 View Post
    Pin 25 is Ground, do you mean Pin 22 GPIO25 ?
    Of course!! My mistake !


    Quote Originally Posted by Jeff07971 View Post
    Are you sure theres nothing extra you've done over what you've told us ?
    I'm using an HfiBerry DAC2


    Why I don't have this line:
    Enabled kernel protocols: lirc nec

    Does the table has a special name/extension ???
    Last edited by PaulH; 2022-01-20 at 07:50.

  6. #36
    Senior Member Jeff07971's Avatar
    Join Date
    Aug 2011
    Location
    London, England
    Posts
    1,791
    When you say

    D/A choice, resize files, LMS, Jivelite install, Kernel keytables install, upload IRfile
    Where do you upload "upload IRfile"

    Name:  2022-01-19 09_58_23-pCP - LIRC — Mozilla Firefox.jpg
Views: 33
Size:  49.5 KB

    Here ?

    Want a webapp ? Get SqueezeLite-X ! https://forums.slimdevices.com/showt...l=1#post903953

  7. #37
    Senior Member
    Join Date
    Jan 2022
    Location
    Switzerland
    Posts
    146
    Quote Originally Posted by Jeff07971 View Post
    When you say



    Where do you upload "upload IRfile"

    Name:  2022-01-19 09_58_23-pCP - LIRC — Mozilla Firefox.jpg
Views: 33
Size:  49.5 KB

    Here ?
    Not sure. It's not the same color...
    Name:  Capture d’écran 2022-01-20 à 16.21.36.jpg
Views: 32
Size:  200.2 KB

  8. #38
    Senior Member Jeff07971's Avatar
    Join Date
    Aug 2011
    Location
    London, England
    Posts
    1,791
    Here

    Name:  Capture d%u2019écran 2022-01-20 à 16.21.36.jpg
Views: 31
Size:  207.0 KB

    Sorry I have "Dark" Theme turned on

    Jeff

    Want a webapp ? Get SqueezeLite-X ! https://forums.slimdevices.com/showt...l=1#post903953

  9. #39
    Senior Member
    Join Date
    Jan 2022
    Location
    Switzerland
    Posts
    146
    Exactly at this place !
    Uploading with this message:
    Code:
    [ INFO ] Uploading: jivelite keytables
    [ INFO ] Backing up files to /mnt/mmcblk0p2/tce/mydata.tgz / 
    Done.
    [ OK ] Backup successful.
    [ INFO ] Loading keytable
    [ INFO ] Backing up files to /mnt/mmcblk0p2/tce/mydata.tgz / 
    Done.
    [ OK ] Backup successful.
    and:
    Code:
    tc@pCP:~$ sudo ir-keytable
    Found /sys/class/rc/rc0/ (/dev/input/event0) with:
    	Name: gpio_ir_recv
    	Driver: gpio_ir_recv, table: rc-rc6-mce
    	LIRC device: /dev/lirc0
    	Supported kernel protocols: lirc rc-5 rc-5-sz jvc sony nec sanyo mce_kbd rc-6 sharp xmp imon 
    	Enabled kernel protocols: lirc rc-6 
    	bus: 25, vendor/product: 0001:0001, version: 0x0100
    	Repeat delay = 500 ms, repeat period = 125 ms

  10. #40
    Senior Member Jeff07971's Avatar
    Join Date
    Aug 2011
    Location
    London, England
    Posts
    1,791
    OK

    We now know that its software !

    Your conf file runs OK on my pCP and enables NEC protocol but dosent on your pCP

    I called your file "Nec.conf" and edited it in MS Windows Notepad

    Nec.conf

    Can you upload this and try "sudo ir-keytable" and "sudo ir-keytable -t" again

    Jeff

    Want a webapp ? Get SqueezeLite-X ! https://forums.slimdevices.com/showt...l=1#post903953

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •