Pcp and Ir control

[Jeff07971]

It looks slightly different to mine but then the all look different !

Now upload to IR Keytables in the pCP GUI and all should work !


My Tables for example

# table: justboomir, type: rc-5
0x1010	KEY_LEFTBRACE
0x1012	KEY_C
0x1011	KEY_POWER
0x101a	KEY_UP
0x101b	KEY_DOWN
0x1013	KEY_LEFT
0x1014	KEY_RIGHT
0x1015	KEY_L
0x1016	KEY_A
0x1017	KEY_ESC
0x1019	KEY_EQUAL
0x1018	KEY_MINUS

# table: slimdevices, type: nec
0x6e00  KEY_MINUS
0x6e01  KEY_EQUAL
0x6e02  KEY_POWER
0x6e03  KEY_Z
0x6e04  KEY_C
0x6e05  KEY_B
0x6e06  KEY_A
0x6e08  KEY_P
0x6e07  KEY_UP
0x6e09  KEY_LEFT
0x6e0b  KEY_RIGHT
0x6e0d  KEY_DOWN
0x6e0f  KEY_1
0x6e10  KEY_2
0x6e11  KEY_3
0x6e12  KEY_4
0x6e13  KEY_5
0x6e14  KEY_6
0x6e15  KEY_7
0x6e16  KEY_8
0x6e17  KEY_9
0x6e19  KEY_0
0x6e18  KEY_F
0x6e47  KEY_F
0x6e1a  KEY_SLASH
0x6e46  KEY_SLASH
0x6e1b  KEY_COMMA
0x6e1c  KEY_DOT
0x6e1d  KEY_S
0x6e1e  KEY_LEFTBRACE
0x6e45  KEY_LEFTBRACE
0x6e1f  KEY_G
0x6e0e  KEY_SEMICOLON
0x6e20  KEY_L
0x6e44  KEY_H

table: RMTB119A, type: sony
0x1ae216 KEY_S
0x1ae215 KEY_POWER
0x1ae200 KEY_1
0x1ae201 KEY_2
0x1ae202 KEY_3
0x10012 KEY_EQUAL
0x1ae203 KEY_4
0x1ae204 KEY_5
0x1ae205 KEY_6
0x1ae206 KEY_7
0x1ae207 KEY_8
0x1ae208 KEY_9
0x10013 KEY_MINUS
0x1ae209 KEY_0
0x1ae269 KEY_D
0x1ae22c KEY_LEFTBRACE
0x1ae239 KEY_UP
0x1ae229 KEY_RIGHTBRACE
0x1ae23b KEY_LEFT
0x1ae23d KEY_ENTER
0x1ae23c KEY_RIGHT
0x1ae243 KEY_T
0x1ae23a KEY_DOWN
0x1ae23f KEY_GRAVE
0x1ae242 KEY_LEFTBRACE
0x1ae257 KEY_Z
0x1ae219 KEY_SPACE
0x1ae256 KEY_B
0x1ae21b KEY_E
0x1ae21a KEY_X
0x1ae21c KEY_R
0x1ae24b KEY_DOT
0x1ae218 KEY_G
0x1ae24c KEY_COMMA

[PaulH]

It looks slightly different to mine but then the all look different !

Now upload to IR Keytables in the pCP GUI and all should work !

Like that?


Pi reboot automatically but it doesn't work

[Jeff07971]

No !

Like this

[PaulH]

No !

Like this

Done, reboot but not working.

Thanks

[Jeff07971]

Done, reboot but not working.

Thanks

Have you installed IR-Tools (Kernel Keytables) and removed Lirc ?

[PaulH]

Have you installed IR-Tools (Kernel Keytables) and removed Lirc ?

LIRC removed.



But how to install IR-Tool?

[Jeff07971]

LIRC removed.



But how to install IR-Tool?

Its already installed that why the button is saying Uninstall

Then in "Kerenl keytables" browse and upload your custom table.

If this dosent work I'd reflash a sdcard and begin again.

[PaulH]

Its already installed that why the button is saying Uninstall

Then in "Kerenl keytables" browse and upload your custom table.

If this dosent work I'd reflash a sdcard and begin again.

Reflash the sd, no change.

[Jeff07971]

Reflash the sd, no change.

Can you list the steps you have taken from a clean SD card onwards

Jeff

[PaulH]

Can you list the steps you have taken from a clean SD card onwards

Jeff

D/A choice, resize files, LMS, Jivelite install, Kernel keytables install, upload IRfile

With dmesg:

[   17.698969] IR RC6 protocol handler initialized
[   17.743418] rc rc0: gpio_ir_recv as /devices/platform/ir-receiver@19/rc/rc0
[   17.743861] rc rc0: lirc_dev: driver gpio_ir_recv registered at minor = 0, raw IR receiver, no transmitter
[   17.744101] input: gpio_ir_recv as /devices/platform/ir-receiver@19/rc/rc0/input0

RC6 not NEC !