Home of the Squeezebox™ & Transporter® network music players.
Page 5 of 5 FirstFirst ... 345
Results 41 to 45 of 45
  1. #41
    Senior Member
    Join Date
    Jan 2022
    Location
    Switzerland
    Posts
    146
    Quote Originally Posted by Jeff07971 View Post
    OK

    We now know that its software !

    Your conf file runs OK on my pCP and enables NEC protocol but dosent on your pCP

    I called your file "Nec.conf" and edited it in MS Windows Notepad

    Attachment 36954

    Can you upload this and try "sudo ir-keytable" and "sudo ir-keytable -t" again

    Jeff
    [ INFO ] Uploading: jivelite keytables
    [ INFO ] Backing up files to /mnt/mmcblk0p2/tce/mydata.tgz /
    Done.
    [ OK ] Backup successful.
    [ INFO ] Loading keytable
    [ INFO ] Backing up files to /mnt/mmcblk0p2/tce/mydata.tgz /
    Done.
    [ OK ] Backup successful.




    Wahou !!!

    Found /sys/class/rc/rc0/ (/dev/input/event0) with:
    Name: gpio_ir_recv
    Driver: gpio_ir_recv, table: rc-rc6-mce
    LIRC device: /dev/lirc0
    Supported kernel protocols: lirc rc-5 rc-5-sz jvc sony nec sanyo mce_kbd rc-6 sharp xmp imon
    Enabled kernel protocols: lirc nec
    bus: 25, vendor/product: 0001:0001, version: 0x0100
    Repeat delay = 500 ms, repeat period = 125 ms

    tc@pCP:~$ sudo ir-keytable -t
    Testing events. Please, press CTRL-C to abort.
    21908.790063: lirc protocol(nec32): scancode = 0x87eee25e
    21908.790086: event type EV_MSC(0x04): scancode = 0x87eee25e
    21908.790086: event type EV_SYN(0x00).
    21908.880094: lirc protocol(nec32): scancode = 0x87eee204
    21908.880108: event type EV_MSC(0x04): scancode = 0x87eee204
    21908.880108: event type EV_SYN(0x00).

    It works!!!!

    I saw too late my file has a .rtf extension. That probably why it doesn't work but without any error message !!!


    Thanks a lot Jeff !!!!! GREAT JOB !!!

  2. #42
    Senior Member Jeff07971's Avatar
    Join Date
    Aug 2011
    Location
    London, England
    Posts
    1,800
    Phew !!! Got there in the end !

    I noticed I had a filename problem once before, its even in the thread "Howto create a linux kernel IR remote keytable for Jivelite on piCorePlayer 5.x/6.x "

    Oh well !

    Glad you got it working

    Enjoy

    Jeff

    Want a webapp ? Get SqueezeLite-X ! https://forums.slimdevices.com/showt...l=1#post903953

  3. #43
    Senior Member
    Join Date
    Jan 2022
    Location
    Switzerland
    Posts
    146
    Quote Originally Posted by Jeff07971 View Post
    Phew !!! Got there in the end !

    I noticed I had a filename problem once before, its even in the thread "Howto create a linux kernel IR remote keytable for Jivelite on piCorePlayer 5.x/6.x "

    Oh well !

    Glad you got it working

    Enjoy

    Jeff
    Perfect!!! I sent you a PM.

  4. #44
    Senior Member paul-'s Avatar
    Join Date
    Jan 2013
    Posts
    4,899
    Quote Originally Posted by PaulH View Post
    I saw too late my file has a .rtf extension. That probably why it doesn't work but without any error message !!!
    rtf is rich text, the file must be plain text. We can handle the Dos->Unix line endings, but not much else. There is very little error checking going on with the file you upload......it takes the user knows what to do. I would have to add some more dependencies to do more error checking.

    Notepad++ is the best windows editor for working on files on a linux system.
    piCorePlayer a small player for the Raspberry Pi in RAM.
    Homepage: https://www.picoreplayer.org

    Please donate if you like the piCorePlayer

  5. #45
    Senior Member
    Join Date
    Jan 2022
    Location
    Switzerland
    Posts
    146
    Quote Originally Posted by paul- View Post
    Notepad++ is the best windows editor for working on files on a linux system.
    I fully agree with you! Unfortunately it didn't exist for MAC. I made the file (RTF!) with Textedit.

    Normally Mac should be closer to linux than window.... :-(

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •