Problem PicorePlayer with ELECROW Touch Display 7" 1024x600 with Jivelite

[peddanet]

Hi,

here I described how to setup the display in Raspberry Pi OS. It worked well, even with flipped display and touch! But in PicorePlayer I have unfortunately again Problems with correct setup of the display (I think now that touch calibrating even with flipped (180° rotated) works, cause the calibration program ts_calibrate did show up the correct matrix, and was accessible):

How do I have setup Jivelite for a flipped touch screen 7" 1024x600? The logo came up right and before I was flipping the screen, Jivelite was working too! After a time of doing nothing Jivelite hangs up the complete system, it could not be warm resetted, instead I had to replug the Pi...
'# Pic is from 5" screen, but looks the same on 7" #

Please give me hints!

[UPDATE] touch does not work on PiCorePlayer besides calibration tool. it rotates the other way round, and is upside down...


Greetz Peter