I've purchased my first electromagnetic speakers, Maggies LRS https://www.magnepan.com/model_lrs. Very happy with the purchase.
I have them in a temporary location in an open area that includes a large living room and a kitchen
I noticed that the speakers starts to distort the sound when the microwave is on...
Distortion does not start immediately after microwave is switched on, but once it starts, it persists and it stops immediately after microwave is turned off.
Is this real or do I have some other issue ?
Results 1 to 10 of 11
-
2021-09-17, 06:00 #1
- Join Date
- Dec 2009
- Location
- Oakville,Ontario,CA
- Posts
- 207
Electrostatic speakers and.... a microwave
Last edited by matka; 2021-09-17 at 12:05.
George
Touch->Denon AVRS530BT ->Triangle Celius
Synology->Duet->Denon AVRS530BT->Paradigm Monitor 7
2 Duets, 1 SB3, 1 Touch, Transporter, Chromecasts
Zenphone -> NAD Viso, Sony WH1000XM3
2 servers -> Ubuntu Linux, NUC and Synology 1 Bay
-
2021-09-17, 06:45 #2
- Join Date
- Jan 2010
- Location
- Hertfordshire
- Posts
- 9,276
-
2021-09-17, 07:00 #3
- Join Date
- May 2021
- Posts
- 95
Last edited by chicks; 2021-09-17 at 07:16.
piTouch™ w/JustBoom DigiHat -> RME ADI-2 DAC FS -> JBL 305P MkII monitors; LMS 8.2 on piCorePlayer/Pi 4; Material Skin.
-
2021-09-17, 07:30 #4
- Join Date
- Jan 2011
- Location
- Staffordshire. UK
- Posts
- 5,131
Microwave ovens have been reported as causing intererence to, either USB or Wireless Lans, or both.
Do some internet searching
I have never noticed it myself (with Quad 2905) and I love a readymeal !
ronnieLast edited by Man in a van; 2021-09-17 at 13:22. Reason: correct typo
-
2021-09-17, 11:42 #5
- Join Date
- Dec 2009
- Location
- Oakville,Ontario,CA
- Posts
- 207
George
Touch->Denon AVRS530BT ->Triangle Celius
Synology->Duet->Denon AVRS530BT->Paradigm Monitor 7
2 Duets, 1 SB3, 1 Touch, Transporter, Chromecasts
Zenphone -> NAD Viso, Sony WH1000XM3
2 servers -> Ubuntu Linux, NUC and Synology 1 Bay
-
2021-09-17, 11:49 #6
- Join Date
- Dec 2009
- Location
- Oakville,Ontario,CA
- Posts
- 207
Your are right, I had no idea on the technology twist
Is a Magneplanar similar to an electrostatic speaker? [top]
They are "kissing cousins" in the sense that the film (or ribbon) is very thin and low mass. The force (magnetic or electrostatic) drives the entire area so there is no need for rigidity—therefore, the mass can be reduced to the lowest possible levels.George
Touch->Denon AVRS530BT ->Triangle Celius
Synology->Duet->Denon AVRS530BT->Paradigm Monitor 7
2 Duets, 1 SB3, 1 Touch, Transporter, Chromecasts
Zenphone -> NAD Viso, Sony WH1000XM3
2 servers -> Ubuntu Linux, NUC and Synology 1 Bay
-
2021-09-18, 05:47 #7
- Join Date
- Dec 2009
- Location
- Oakville,Ontario,CA
- Posts
- 207
George
Touch->Denon AVRS530BT ->Triangle Celius
Synology->Duet->Denon AVRS530BT->Paradigm Monitor 7
2 Duets, 1 SB3, 1 Touch, Transporter, Chromecasts
Zenphone -> NAD Viso, Sony WH1000XM3
2 servers -> Ubuntu Linux, NUC and Synology 1 Bay
-
2021-09-20, 13:15 #8
- Join Date
- Dec 2009
- Location
- Oakville,Ontario,CA
- Posts
- 207
It's power drain
I called Magnepan Technical Support (no wait time...) and they assured me that since speakers are 40 feet away form the microwave that it can't be magnetic interference.
This leaves the power quality to the amp (temporary Denon receiver as I'm under renovations) that is drained when microwave is on. This makes perfect sense as the location is a cottage and far from modern code.George
Touch->Denon AVRS530BT ->Triangle Celius
Synology->Duet->Denon AVRS530BT->Paradigm Monitor 7
2 Duets, 1 SB3, 1 Touch, Transporter, Chromecasts
Zenphone -> NAD Viso, Sony WH1000XM3
2 servers -> Ubuntu Linux, NUC and Synology 1 Bay
-
2021-09-24, 11:40 #9
- Join Date
- Sep 2006
- Posts
- 393
For the record, Quads, like my Martin Logan's, are electrostatic designs.
IMHO, given sufficient breathing room, bipolar speakers of this type of design (electrostatic, electromagnetic) are hard to beat!
On the microwave front, they shouldn't be leaking much energy, there are strict safety requirements on that front. I would suspect polluted power might be the issue you're having.
Enjoy and cheers! DaveAudiophile wish list: Zero Distortion, Infinite Signal to Noise Ratio, and a Bandwidth from DC to Daylight
-
2021-09-24, 11:50 #10
- Join Date
- Jan 2010
- Location
- Hertfordshire
- Posts
- 9,276