Home of the Squeezebox™ & Transporter® network music players.
Page 33 of 37 FirstFirst ... 233132333435 ... LastLast
Results 321 to 330 of 368
  1. #321
    Senior Member paul-'s Avatar
    Join Date
    Jan 2013
    Posts
    4,947
    My guess is that the USB BT5 sticks that you have tried are either not linux compatible, or a modeswitch device.

    Does it show up like a USB flash drive? Boot your pCP device without the USB BT stick installed. Then insert the device, then go to diagnostics and look for the "dmesg" section. Look towards the bottom, what does it say if anythng about the device you just inserted?
    piCorePlayer a small player for the Raspberry Pi in RAM.
    Homepage: https://www.picoreplayer.org

    Please donate if you like the piCorePlayer

  2. #322
    Junior Member
    Join Date
    Feb 2020
    Posts
    13
    Quote Originally Posted by castalla View Post
    You are trying to use a realtek dongle? If so, then maybe there are driver problems.
    OK thx

  3. #323
    Junior Member
    Join Date
    Feb 2020
    Posts
    13
    Quote Originally Posted by paul- View Post
    my guess is that the usb bt5 sticks that you have tried are either not linux compatible, or a modeswitch device.
    OK

    Quote Originally Posted by paul- View Post
    does it show up like a usb flash drive? Boot your pcp device without the usb bt stick installed. Then insert the device, then go to diagnostics and look for the "dmesg" section. Look towards the bottom, what does it say if anythng about the device you just inserted?
    I have tried to extract as much information as possible, I hope it will be useful and that in the end I will be able to use the ZexMTE key which has a very good range...


    Kalea 5.0 (CSR)
    Code:
    [  138.715860] usb 1-1.1.2: new full-speed USB device number 5 using dwc_otg
    [  138.824469] usb 1-1.1.2: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91
    [  138.824507] usb 1-1.1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
    [  138.824530] usb 1-1.1.2: Product: USB1.1-A
    [  138.849630] usbcore: registered new interface driver btusb
    [  138.852479] Bluetooth: hci0: CSR: Unbranded CSR clone detected; adding workarounds and force-suspending once...
    [  139.276808] Bluetooth: RFCOMM TTY layer initialized
    [  139.276860] Bluetooth: RFCOMM socket layer initialized
    [  139.276902] Bluetooth: RFCOMM ver 1.11
    Digitus 5.0 (CSR)
    Code:
    [  449.759857] usb 1-1.1.2: new full-speed USB device number 6 using dwc_otg
    [  449.865248] usb 1-1.1.2: Duplicate descriptor for config 1 interface 1 altsetting 5, skipping
    [  449.868604] usb 1-1.1.2: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91
    [  449.868632] usb 1-1.1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
    [  449.868654] usb 1-1.1.2: Product: USB2.0-BT
    [  449.875491] Bluetooth: hci0: CSR: Unbranded CSR clone detected; adding workarounds and force-suspending once...
    [  449.875558] Bluetooth: hci0: CSR: Failed to suspend the device for our Barrot 8041a02 receive-issue workaround
    [  452.707810] Bluetooth: hci0: command 0x0c01 tx timeout
    ZexMTE 5.0 (Realtek) (the one that has an antenna with a very good range, on a PC)
    Code:
    [  502.239869] usb 1-1.1.2: new full-speed USB device number 7 using dwc_otg
    [  502.343217] usb 1-1.1.2: New USB device found, idVendor=0bda, idProduct=a725, bcdDevice= 2.00
    [  502.343246] usb 1-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [  502.343269] usb 1-1.1.2: Product: Bluetooth 5.1 Radio
    [  502.343288] usb 1-1.1.2: Manufacturer: Realtek
    [  502.343306] usb 1-1.1.2: SerialNumber: 00E04C239987
    [  502.347571] Bluetooth: hci1: RTL: examining hci_ver=0a hci_rev=000b lmp_ver=0a lmp_subver=8761
    [  502.349554] Bluetooth: hci1: RTL: rom_version status=0 version=1
    [  502.349584] Bluetooth: hci1: RTL: loading rtl_bt/rtl8761bu_fw.bin
    [  502.349801] bluetooth hci1: Direct firmware load for rtl_bt/rtl8761bu_fw.bin failed with error -2
    [  502.349833] Bluetooth: hci1: RTL: firmware file rtl_bt/rtl8761bu_fw.bin not found
    Asus 5.0 (Realtek)
    Code:
    [  630.499850] usb 1-1.1.2: new full-speed USB device number 8 using dwc_otg
    [  630.602969] usb 1-1.1.2: New USB device found, idVendor=0b05, idProduct=190e, bcdDevice= 2.00
    [  630.603008] usb 1-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [  630.603031] usb 1-1.1.2: Product: ASUS USB-BT500
    [  630.603051] usb 1-1.1.2: Manufacturer: Realtek
    [  630.603069] usb 1-1.1.2: SerialNumber: 00E04C239987
    [  630.607566] Bluetooth: hci1: RTL: examining hci_ver=0a hci_rev=000b lmp_ver=0a lmp_subver=8761
    [  630.609583] Bluetooth: hci1: RTL: rom_version status=0 version=1
    [  630.609617] Bluetooth: hci1: RTL: loading rtl_bt/rtl8761bu_fw.bin
    [  630.609798] bluetooth hci1: Direct firmware load for rtl_bt/rtl8761bu_fw.bin failed with error -2
    [  630.609828] Bluetooth: hci1: RTL: firmware file rtl_bt/rtl8761bu_fw.bin not found
    TP-Link 5.0 (Realtek)
    Code:
    [  662.499850] usb 1-1.1.2: new full-speed USB device number 9 using dwc_otg
    [  662.602967] usb 1-1.1.2: New USB device found, idVendor=2357, idProduct=0604, bcdDevice= 2.00
    [  662.602996] usb 1-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [  662.603018] usb 1-1.1.2: Product: TP-Link UB500 Adapter
    [  662.603037] usb 1-1.1.2: Manufacturer:  
    [  662.603055] usb 1-1.1.2: SerialNumber: E848B8C82000
    [  662.607550] Bluetooth: hci1: RTL: examining hci_ver=0a hci_rev=000b lmp_ver=0a lmp_subver=8761
    [  662.609534] Bluetooth: hci1: RTL: rom_version status=0 version=1
    [  662.609559] Bluetooth: hci1: RTL: loading rtl_bt/rtl8761bu_fw.bin
    [  662.609677] bluetooth hci1: Direct firmware load for rtl_bt/rtl8761bu_fw.bin failed with error -2
    [  662.609699] Bluetooth: hci1: RTL: firmware file rtl_bt/rtl8761bu_fw.bin not found
    NoName 4.2 (CSR) (the only working key)
    Code:
    [  748.007851] usb 1-1.1.2: new full-speed USB device number 10 using dwc_otg
    [  748.119950] usb 1-1.1.2: New USB device found, idVendor=0a5c, idProduct=21ec, bcdDevice= 1.12
    [  748.119979] usb 1-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [  748.120001] usb 1-1.1.2: Product: BCM20702A0
    [  748.120020] usb 1-1.1.2: Manufacturer: Broadcom Corp
    [  748.120039] usb 1-1.1.2: SerialNumber: 001986002CB5
    [  748.235534] Bluetooth: hci1: BCM: chip id 63
    [  748.237529] Bluetooth: hci1: BCM: features 0x07
    [  748.269562] Bluetooth: hci1: BCM20702A
    [  748.269584] Bluetooth: hci1: BCM20702A1 (001.002.014) build 0000
    [  748.271928] Bluetooth: hci1: BCM: firmware Patch file not found, tried:
    [  748.271947] Bluetooth: hci1: BCM: 'brcm/BCM20702A1-0a5c-21ec.hcd'
    [  748.271963] Bluetooth: hci1: BCM: 'brcm/BCM-0a5c-21ec.hcd'
    Thx

  4. #324
    Junior Member
    Join Date
    Feb 2020
    Posts
    13
    Bonus!
    One of these famous BT keys which are in reality audio transmitters, this one is recognized as a headset under Windows, without real interest on PCP...
    But if it helps

    YMOO B10Q (Amazon.fr link)
    Code:
    [   35.291925] usb 1-1.1.2: new full-speed USB device number 5 using dwc_otg
    [   35.401313] usb 1-1.1.2: New USB device found, idVendor=0a12, idProduct=4010, bcdDevice=20.52
    [   35.401328] usb 1-1.1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [   35.403354] hub 1-1.1.2:1.0: USB hub found
    [   35.405057] hub 1-1.1.2:1.0: 4 ports detected
    [   36.075902] usb 1-1.1.2.1: new full-speed USB device number 6 using dwc_otg
    [   36.198807] usb 1-1.1.2.1: New USB device found, idVendor=0a12, idProduct=4007, bcdDevice=28.38
    [   36.198820] usb 1-1.1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
    [   36.198829] usb 1-1.1.2.1: Product: B10Q
    [   36.198838] usb 1-1.1.2.1: Manufacturer: TaiYiLian
    [   36.198845] usb 1-1.1.2.1: SerialNumber: D09739B11603195D3B07
    [   36.210608] input: TaiYiLian B10Q Consumer Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2.1/1-1.1.2.1:1.0/0003:0A12:4007.0001/input/input0
    [   36.268401] input: TaiYiLian B10Q as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2.1/1-1.1.2.1:1.0/0003:0A12:4007.0001/input/input1
    [   36.269436] hid-generic 0003:0A12:4007.0001: input,hiddev96,hidraw0: USB HID v1.11 Device [TaiYiLian B10Q] on usb-3f980000.usb-1.1.2.1/input0
    [   36.278958] hid-generic 0003:0A12:4007.0002: hiddev97,hidraw1: USB HID v1.11 Device [TaiYiLian B10Q] on usb-3f980000.usb-1.1.2.1/input1
    [   36.300442] mc: Linux media interface: v0.10
    [   36.319690] usb 1-1.1.2.1: 3:1: cannot set freq 48000 to ep 0x83
    [   36.326059] usb 1-1.1.2.1: 4:1: cannot set freq 96000 to ep 0x2

  5. #325
    Senior Member paul-'s Avatar
    Join Date
    Jan 2013
    Posts
    4,947
    If you read the dmesg sections that you posted, you need to get the BT firmware that is being requested. Get the firmware from here. https://git.kernel.org/pub/scm/linux...ware.git/tree/

    You will need to create an extension to hold the firmware, since the firmware needs to be present during boot.
    piCorePlayer a small player for the Raspberry Pi in RAM.
    Homepage: https://www.picoreplayer.org

    Please donate if you like the piCorePlayer

  6. #326
    Junior Member
    Join Date
    Feb 2020
    Posts
    13
    OK that's what I was afraid of, it's definitely a missing file and what you're talking about is the part I have absolutely no control over 😑
    I'll try some research to see if I can find a tutorial, it shouldn't be too complicated 😅
    I'll keep you posted...

    I forgot to say MERCI 👍🏻
    Last edited by Sylar; 2022-07-28 at 15:35.

  7. #327
    Member
    Join Date
    Nov 2009
    Location
    Denmark
    Posts
    67

    BT-streaming from phone to LMS

    Hi forum,

    I hope this question is in scope for this thread although I can see it is mainly about BT connection from LMS to speakers.

    I would like to BT-stream from my phone to LMS and play the stream on (sync'ed) players (also non-PcP based players like squeezebox boom).
    Is this possible? Or is it better to use the LMS WaveIn Plugin?

    I have followed som older instructions from a (now dead) thread: https://forums.slimdevices.com/showt...to-LMS-on-RPi3
    but I cannot get this to work.
    Basically, everything seems to work except for sound coming out of the speakers (details in my last post of the abovementioned thread, I used a PcP-v8.3.0-based player when testing).
    Any ideas for solutions or how to debug?

    Could be really cool to get this feature working
    Best
    -thomas
    --
    Setup in two locations:
    Location 1:
    Server: RPi 4 running LMS 8.3
    Players: RPi 4 w. SqueezeLite (HifiBerry Digi+ pro) + 2 SB boom Libratone Zipp, Libratone Live
    Player grouping: Two groups: Group1: RPi 4, SB Boom, Libratone Live, Libratone Zipp , Group2: 1 SB Boom

    Location 2:
    Server: RPi 4 running LMS 8.3
    Players: RPi 4 w. SqueezeLite + 1 SB boom 2 x Libratone Zipp, Chromecast Audio

    Remotes: Mobile phone OnePlus 5 with SqueezeCtrl and Orange Squeeze
    Streaming Service: Qobuz

  8. #328
    Senior Member mr-b's Avatar
    Join Date
    Feb 2007
    Location
    UK
    Posts
    679

    Windows 11

    Hi

    Does anyone have *exact* instructions on how to pair a PCP with Windows11?
    I've tried various incantations of pairing, discovering etc. on both ends but neither device sees the other, even though "unknown devices" are seen and my PCP pairs fine with Android devices.

  9. #329
    Senior Member mr-b's Avatar
    Join Date
    Feb 2007
    Location
    UK
    Posts
    679
    I deleted all the existing paired devices and started again.

    This time Win11 could see the PCP but it couldn't connect. "Try connecting your device again".
    Another laptop with Win10 and an Android tablet pair and connect fine.

    Code:
    10-01 22:14 BST INFO     ---- Caught Connect signal ----
    10-01 22:14 BST DEBUG    /org/bluez/hci0/dev_CC_3D_82_38_BC_69
    10-01 22:14 BST DEBUG       HCI:hci0
    10-01 22:14 BST INFO        MAC:CC:3D:82:38:BC:69
    10-01 22:14 BST INFO        TRANSPORT:none
    10-01 22:14 BST INFO     ---- Caught Connect signal ----
    10-01 22:14 BST DEBUG    /org/bluez/hci0/dev_CC_3D_82_38_BC_69
    10-01 22:14 BST DEBUG       HCI:hci0
    10-01 22:14 BST INFO        MAC:CC:3D:82:38:BC:69
    10-01 22:14 BST INFO        TRANSPORT:none
    10-01 22:14 BST INFO     ---- Caught Connect signal ----
    10-01 22:14 BST DEBUG    /org/bluez/hci0/dev_CC_3D_82_38_BC_69
    10-01 22:14 BST DEBUG       HCI:hci0
    10-01 22:14 BST INFO        MAC:CC:3D:82:38:BC:69
    10-01 22:14 BST INFO        TRANSPORT:none
    10-01 22:14 BST INFO     ---- Caught Connect signal ----
    10-01 22:14 BST DEBUG    /org/bluez/hci0/dev_CC_3D_82_38_BC_69/player0
    10-01 22:14 BST DEBUG       HCI:hci0
    10-01 22:14 BST INFO        MAC:CC:3D:82:38:BC:69
    10-01 22:14 BST INFO        TRANSPORT:player0
    10-01 22:14 BST INFO     ---- Caught Connect signal ----
    10-01 22:14 BST DEBUG    /org/bluez/hci0/dev_CC_3D_82_38_BC_69/fd0
    10-01 22:14 BST DEBUG       HCI:hci0
    10-01 22:14 BST INFO        MAC:CC:3D:82:38:BC:69
    10-01 22:14 BST INFO        TRANSPORT:fd0
    10-01 22:14 BST INFO     ---- Caught Connect signal ----
    10-01 22:14 BST DEBUG    /org/bluealsa/hci0/dev_CC_3D_82_38_BC_69/a2dpsnk/source
    10-01 22:14 BST DEBUG       HCI:hci0
    10-01 22:14 BST INFO        MAC:CC:3D:82:38:BC:69
    10-01 22:14 BST INFO        TRANSPORT:a2dpsnk
    10-01 22:14 BST INFO        Unknown device CC:3D:82:38:BC:69
    10-01 22:14 BST INFO        Starting Playback from device CC:3D:82:38:BC:69
    10-01 22:14 BST INFO        Using bluealsa-aplay for device: CC:3D:82:38:BC:69
    10-01 22:14 BST DEBUG       LMS server IP:""
    10-01 22:14 BST DEBUG       pCP Card Conf:"hifi_dac+.conf"
    10-01 22:14 BST DEBUG       pCP BT_OUT_DEVICE="hw:CARD=sndrpihifiberry,DEV=0"
    10-01 22:14 BST DEBUG       pCP BT_ALSAVOLUME=""
    10-01 22:14 BST DEBUG       pCP SSET="Digital"
    10-01 22:14 BST INFO        Starting player:"NewDevice" bluetooth, alsa device:"hw:CARD=sndrpihifiberry,DEV=0", volume:"Digital".
    10-01 22:14 BST INFO     ---- Caught Connect signal ----
    10-01 22:14 BST DEBUG    /org/bluez/hci0/dev_CC_3D_82_38_BC_69/sep52
    10-01 22:14 BST DEBUG       HCI:hci0
    10-01 22:14 BST INFO        MAC:CC:3D:82:38:BC:69
    10-01 22:14 BST INFO        TRANSPORT:sep52
    10-01 22:14 BST INFO     ---- Caught Connect signal ----
    10-01 22:14 BST DEBUG    /org/bluez/hci0/dev_CC_3D_82_38_BC_69/sep54
    10-01 22:14 BST DEBUG       HCI:hci0
    10-01 22:14 BST INFO        MAC:CC:3D:82:38:BC:69
    10-01 22:14 BST INFO        TRANSPORT:sep54
    10-01 22:16 BST INFO     ---- Caught Disconnect signal ----
    10-01 22:16 BST DEBUG       HCI: hci0
    10-01 22:16 BST INFO        MAC: CC:3D:82:38:BC:69
    10-01 22:16 BST INFO        TRANSPORT: player0
    10-01 22:16 BST INFO     ---- Caught Disconnect signal ----
    10-01 22:16 BST DEBUG       HCI: hci0
    10-01 22:16 BST INFO        MAC: CC:3D:82:38:BC:69
    10-01 22:16 BST INFO        TRANSPORT: fd0
    10-01 22:16 BST INFO     ---- Caught Disconnect signal ----
    10-01 22:16 BST DEBUG       HCI: hci0
    10-01 22:16 BST INFO        MAC: CC:3D:82:38:BC:69
    10-01 22:16 BST INFO        TRANSPORT: sep52
    10-01 22:16 BST INFO     ---- Caught Disconnect signal ----
    10-01 22:16 BST DEBUG       HCI: hci0
    10-01 22:16 BST INFO        MAC: CC:3D:82:38:BC:69
    10-01 22:16 BST INFO        TRANSPORT: sep54
    10-01 22:16 BST INFO     ---- Caught Disconnect signal ----
    10-01 22:16 BST DEBUG       HCI: hci0
    10-01 22:16 BST INFO        MAC: CC:3D:82:38:BC:69
    10-01 22:16 BST INFO        TRANSPORT: a2dpsnk
    10-01 22:16 BST INFO        Stopping playback from NewDevice
    10-01 22:17 BST INFO     ---- Caught Connect signal ----
    10-01 22:17 BST DEBUG    /org/bluez/agent
    10-01 22:17 BST INFO     ---- Caught Connect signal ----
    10-01 22:17 BST DEBUG    /org/bluez/hci0/dev_80_D2_1D_C7_94_DE
    10-01 22:17 BST DEBUG       HCI:hci0
    10-01 22:17 BST INFO        MAC:80:D2:1D:C7:94:DE
    10-01 22:17 BST INFO        TRANSPORT:none
    10-01 22:17 BST INFO     ---- Caught Disconnect signal ----
    10-01 22:17 BST INFO     ---- Caught Disconnect signal ----
    10-01 22:17 BST DEBUG       HCI: hci0
    10-01 22:17 BST INFO        MAC: 80:D2:1D:C7:94:DE
    10-01 22:17 BST INFO        TRANSPORT: none
    10-01 22:17 BST INFO        Unknown device 80:D2:1D:C7:94:DE
    10-01 22:18 BST INFO     ---- Caught Connect signal ----
    10-01 22:18 BST DEBUG    /org/bluez/hci0/dev_80_D2_1D_C7_94_DE
    10-01 22:18 BST DEBUG       HCI:hci0
    10-01 22:18 BST INFO        MAC:80:D2:1D:C7:94:DE
    10-01 22:18 BST INFO        TRANSPORT:none
    10-01 22:18 BST INFO     ---- Caught Disconnect signal ----
    10-01 22:18 BST DEBUG       HCI: hci0
    10-01 22:18 BST INFO        MAC: 80:D2:1D:C7:94:DE
    10-01 22:18 BST INFO        TRANSPORT: none
    10-01 22:18 BST INFO        Unknown device 80:D2:1D:C7:94:DE

  10. #330
    Senior Member paul-'s Avatar
    Join Date
    Jan 2013
    Posts
    4,947
    I donĺt have windows 11 machines yet.
    piCorePlayer a small player for the Raspberry Pi in RAM.
    Homepage: https://www.picoreplayer.org

    Please donate if you like the piCorePlayer

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •