Home of the Squeezebox™ & Transporter® network music players.
Page 63 of 95 FirstFirst ... 1353616263646573 ... LastLast
Results 621 to 630 of 950
  1. #621
    Senior Member paul-'s Avatar
    Join Date
    Jan 2013
    Posts
    4,834
    #!/bin/sh must be the first line of the script.

    monitor udev, you should see what is going on. when you plug/unplug the USB.
    piCorePlayer a small player for the Raspberry Pi in RAM.
    Homepage: https://www.picoreplayer.org

    Please donate if you like the piCorePlayer

  2. #622
    Senior Member Jeff07971's Avatar
    Join Date
    Aug 2011
    Location
    London, England
    Posts
    1,791
    Quote Originally Posted by paul- View Post
    Not sure Jeff. It’s sensing the tv is not using the hdmi…..not sure why it doesn’t come back. I wonder if the fkms driver does the same thing…..just be aware that the fkms doesn’t have the noaudio parameter.
    Hi Paul,

    I replaced "dtoverlay=vc4-kms-v3d,noaudio" with "dtoverlay=vc4-fkms-v3d" in config.txt and all seems to work fine now.

    When I posted the dmesg output before I left out a proceeding line which read

    Code:
    rc rc0: two consecutive events of type space
    In helping someone else with an IR remote I now realise that this was CEC

    This line still appears when I switch TV input but no longer get the

    Code:
    vc4_hdmi 3f902000.hdmi: Unknown register ID 58
    Thanks for your help as usual !

    Jeff

    Want a webapp ? Get SqueezeLite-X ! https://forums.slimdevices.com/showt...l=1#post903953

  3. #623
    Junior Member
    Join Date
    Dec 2021
    Posts
    9
    Quote Originally Posted by jubm View Post
    FYI, I found another one that is not listed in that list : ASUS USB-AC51, also using a 802.11ac Mediatek MT7610U chip. The advantage compared to the other 802.11ac dongles of the list is that it is smaller and cheap (the Linksys AE6000 is small too but old and very hard to find outside of US currently).
    Looks like I have bad luck with WiFi dongles !
    Here's what I get when I plug my new ASUS USB-AC51 dongle on a PiCorePlayer 7.0.1 :
    Code:
    [ 1347.451699] usb 1-1.5: new high-speed USB device number 6 using dwc_otg
    [ 1347.597708] usb 1-1.5: New USB device found, idVendor=0b05, idProduct=17d1, bcdDevice= 1.00
    [ 1347.597732] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [ 1347.597749] usb 1-1.5: Product: WiFi
    [ 1347.597765] usb 1-1.5: Manufacturer: MediaTek
    [ 1347.597781] usb 1-1.5: SerialNumber: 1.0
    [ 1347.691699] usb 1-1.5: reset high-speed USB device number 6 using dwc_otg
    [ 1347.827575] mt76x0u 1-1.5:1.0: ASIC revision: 76100002 MAC revision: 76502000
    [ 1347.831537] mt76x0u 1-1.5:1.0: mediatek/mt7610e.bin not found, switching to mediatek/mt7610u.bin
    [ 1347.831828] mt76x0u 1-1.5:1.0: Direct firmware load for mediatek/mt7610u.bin failed with error -2
    [ 1347.838396] mt76x0u: probe of 1-1.5:1.0 failed with error -2
    Any idea ? Should I upgrade to 8.1.0 first? It may be better supported on a more recent kernel?

  4. #624
    Junior Member
    Join Date
    Jan 2022
    Posts
    10
    Quote Originally Posted by paul- View Post
    #!/bin/sh must be the first line of the script.
    Thanks, Paul, this really solved the problem!
    Although I don't fully understand why: When I executed the scripts manually, they worked. I implemented the same concept under Raspbian - it worked like a charm. However, I take it as is and am happy that it is working now.

    Thanks!
    Sven

  5. #625
    Junior Member
    Join Date
    Dec 2021
    Posts
    9
    Quote Originally Posted by jubm View Post
    Looks like I have bad luck with WiFi dongles !
    Here's what I get when I plug my new ASUS USB-AC51 dongle on a PiCorePlayer 7.0.1 :
    Code:
    [ 1347.451699] usb 1-1.5: new high-speed USB device number 6 using dwc_otg
    [ 1347.597708] usb 1-1.5: New USB device found, idVendor=0b05, idProduct=17d1, bcdDevice= 1.00
    [ 1347.597732] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [ 1347.597749] usb 1-1.5: Product: WiFi
    [ 1347.597765] usb 1-1.5: Manufacturer: MediaTek
    [ 1347.597781] usb 1-1.5: SerialNumber: 1.0
    [ 1347.691699] usb 1-1.5: reset high-speed USB device number 6 using dwc_otg
    [ 1347.827575] mt76x0u 1-1.5:1.0: ASIC revision: 76100002 MAC revision: 76502000
    [ 1347.831537] mt76x0u 1-1.5:1.0: mediatek/mt7610e.bin not found, switching to mediatek/mt7610u.bin
    [ 1347.831828] mt76x0u 1-1.5:1.0: Direct firmware load for mediatek/mt7610u.bin failed with error -2
    [ 1347.838396] mt76x0u: probe of 1-1.5:1.0 failed with error -2
    Any idea ? Should I upgrade to 8.1.0 first? It may be better supported on a more recent kernel?
    I tried a fresh install of PCP8.1 : same error

  6. #626
    Senior Member paul-'s Avatar
    Join Date
    Jan 2013
    Posts
    4,834
    Quote Originally Posted by jubm View Post
    I tried a fresh install of PCP8.1 : same error
    We don't have a mediatek firmware extension. I'll try to get a package made this evening.
    piCorePlayer a small player for the Raspberry Pi in RAM.
    Homepage: https://www.picoreplayer.org

    Please donate if you like the piCorePlayer

  7. #627
    Senior Member paul-'s Avatar
    Join Date
    Jan 2013
    Posts
    4,834
    Quote Originally Posted by Jeff07971 View Post
    Hi Paul,

    I replaced "dtoverlay=vc4-kms-v3d,noaudio" with "dtoverlay=vc4-fkms-v3d" in config.txt and all seems to work fine now.
    The vc4 stuff is still really new, and then throw on cec. ....it has been a struggle for a standard configuration when it comes to displays.
    piCorePlayer a small player for the Raspberry Pi in RAM.
    Homepage: https://www.picoreplayer.org

    Please donate if you like the piCorePlayer

  8. #628
    Senior Member paul-'s Avatar
    Join Date
    Jan 2013
    Posts
    4,834
    Quote Originally Posted by Sven_R View Post
    Thanks, Paul, this really solved the problem!
    Although I don't fully understand why: When I executed the scripts manually, they worked. I implemented the same concept under Raspbian - it worked like a charm. However, I take it as is and am happy that it is working now.
    When you run manually, the shell interpreter that you are logged in with understands how to handle the script. When launched from udev, it doesn't know that it is a shell script.

    Here is more information than you probably wanted to know.....lol. https://en.wikipedia.org/wiki/Shebang_(Unix)
    piCorePlayer a small player for the Raspberry Pi in RAM.
    Homepage: https://www.picoreplayer.org

    Please donate if you like the piCorePlayer

  9. #629
    Junior Member
    Join Date
    Dec 2021
    Posts
    9
    Quote Originally Posted by paul- View Post
    We don't have a mediatek firmware extension. I'll try to get a package made this evening.
    Thank you Paul. That is indeed needed since we don't have the Realtek drivers anymore.

  10. #630
    Senior Member mr-b's Avatar
    Join Date
    Feb 2007
    Location
    UK
    Posts
    663

    Update notifications?

    Hi

    I did search but couldn't find an answer to this ...

    Is there any way to have a notification of pCP updates ( or other component updates) e.g. like LMS?
    I don't tend to update on a whim but it's be great to at least have some notice of updates that one could review. Currently I seem to discover new releases by accident.
    The notification could be via the UI or via a forum Announce (only) locked thread where each release update notice could be posted (and to which one could subscribe).
    Heck, a pCP sub forum would be handy too.
    Last edited by mr-b; 2022-01-21 at 13:52.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •