Home of the Squeezebox™ & Transporter® network music players.
Results 1 to 3 of 3

Thread: DIY Preamp

Threaded View

  1. #1

    DIY Preamp

    Hello,
    My homeoffice amp needs replacement and while I have a candidate, Marantz PM6007, I would like something smaller with a class-d power part (the room is warm enough as is), the Cyrus One would fit IF it had line/tape out instead of preout. There are other suitable solutions but they are waaay above what I can spend.
    After much searching for a ready made solution I started thinking about building something myself. The poweramp bit seems very straight forward, there are kits from both icepower and hypex where you pretty much just attach the cables and stick it in a box. The preamp seems to be a bit harder, all the kits or instructions I can find are either very simple passive solutions that doesn't seem to fit my needs or lean to the more exotic with tubes etc and tend to get expensive.
    What I want is at least three line in, one out, and a pre out for the separate poweramp. No need for a remote or anything like that, input selector and volume will do the trick. Has anyone here built something like this or have some pointers to where I might find a good kit or instructions?

    Thanks!
    Last edited by v2k; 2021-06-07 at 10:50.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •