Home of the Squeezebox™ & Transporter® network music players.
Results 1 to 10 of 25

Hybrid View

  1. #1

    squeezeAMP unstable - is there a system log to view?

    Just recently, I've been having a few problems with my squeezeAMP. When I power it up, it boots rapidly and becomes visible to LMS. I can play music. However it soon stops playing (after a variable period, often less than an hour, and becomes invisible to LMS - I assume Squeezelite has stopped. It still shows up as being attached to my router, but the squeezeAMP admin web page doesn't load, and pings sent to the device's IP don't reach it.

    Is there a system log I can access to see what may be happening?

    - it's just a bare board, not in a case or with any battery attached
    - powered by a regular 5V USB adapter (have tried more than one of these and a 6V DC adapter).
    - audio output is via SPDIF output to an external DAC (I have the -R flag set in Audio - Optional Settings as recommended by Philippe some months ago)
    - fw: SqueezeAmp.16.689.master-cmake, mode: SqueezeAmp. (I've tried various other firmware versions)

    It doesn't seem to depend on file format being played. LMS is Version: 8.1.2 - 1622353561 @ Sun May 30 09:04:30 CEST 2021, and it's running on a Raspberry Pi, pCP 7.0.1. All other players are working fine.

    Robert

    Edit: Just trying with I2C-headphone output instead of SPDIF
    Last edited by Grumpy Bob; 2021-05-31 at 12:02.
    Home: Raspberry Pi 4/pCP7.0/LMS8.1.2/Material with files on QNAP TS-251A
    Touch > DacMagic 100 > Naim Audio Nait 3 > Mission 752 (plus Rega Planar 3 > Rega Fono Mini; Naim CD3)
    2 x Squeezebox Radios, 1 X Squeezebox 3 (retired), 1 x SqueezeAMP
    Office: LMS8.0.0 running on Raspberry Pi3; Raspberry Pi 3 player with touchscreen/piCorePlayer/IQaudIO DAC and Amp
    Portable: Raspberry Pi 3B/pCP7.0.1/LMS8.1.2/Material, files on Seagate portable drive, powered via power brick

  2. #2
    Senior Member
    Join Date
    Feb 2008
    Posts
    426
    You can follow the log via telnet or serial.
    The system tab on the web interface has a setting under services called "Telnet server. Use only for troubleshooting", which should better read "where do you want the log to go?"
    Choices are Disabled, Telnet only, and Telnet and Serial.

    I, too, have rare instances of my homebrew Squeezelite-ESP32 systems losing connection. Of course there is no use to look for the log via telnet after the fact. But also loggin continuously via telnet doesn't reveal anything. It seems the connection is lost before anything unusual is logged.
    So far I haven't made to effort to hook up a serial cable to follow a system go down.

  3. #3
    It looks a little awkward to follow events via telnet, when the period between system start and the squeezeAMP stopping is variable and a little unpredictable...

    In the meantime, I have flashed it with fw: SqueezeAmp.16.654.master-cmake, mode: squeezelite (dated 14th April) and it has been running fine for over 3.5h so far this morning.

    Robert

    Update: now been running for about 10h with no problems.
    Last edited by Grumpy Bob; 2021-06-01 at 07:02.
    Home: Raspberry Pi 4/pCP7.0/LMS8.1.2/Material with files on QNAP TS-251A
    Touch > DacMagic 100 > Naim Audio Nait 3 > Mission 752 (plus Rega Planar 3 > Rega Fono Mini; Naim CD3)
    2 x Squeezebox Radios, 1 X Squeezebox 3 (retired), 1 x SqueezeAMP
    Office: LMS8.0.0 running on Raspberry Pi3; Raspberry Pi 3 player with touchscreen/piCorePlayer/IQaudIO DAC and Amp
    Portable: Raspberry Pi 3B/pCP7.0.1/LMS8.1.2/Material, files on Seagate portable drive, powered via power brick

  4. #4
    I've had my SqueezeAMP (running SqueezeAmp.16.654.master-cmake, mode: squeezelite) playing music for 14h now, with no issues. So I'm concluding my recent issues with SqueezeAMP stopping and requiring a reboot are associated with 1.689 and 1.681.

    Anyway all is now good.

    Robert
    Home: Raspberry Pi 4/pCP7.0/LMS8.1.2/Material with files on QNAP TS-251A
    Touch > DacMagic 100 > Naim Audio Nait 3 > Mission 752 (plus Rega Planar 3 > Rega Fono Mini; Naim CD3)
    2 x Squeezebox Radios, 1 X Squeezebox 3 (retired), 1 x SqueezeAMP
    Office: LMS8.0.0 running on Raspberry Pi3; Raspberry Pi 3 player with touchscreen/piCorePlayer/IQaudIO DAC and Amp
    Portable: Raspberry Pi 3B/pCP7.0.1/LMS8.1.2/Material, files on Seagate portable drive, powered via power brick

  5. #5
    Senior Member
    Join Date
    May 2008
    Location
    Canada
    Posts
    7,556
    Quote Originally Posted by Grumpy Bob View Post
    I've had my SqueezeAMP (running SqueezeAmp.16.654.master-cmake, mode: squeezelite) playing music for 14h now, with no issues. So I'm concluding my recent issues with SqueezeAMP stopping and requiring a reboot are associated with 1.689 and 1.681.

    Anyway all is now good.

    Robert
    argh... not good news then but thanks for investigating. Is there any chance you could try to play the same format all the time to see if there is a correlation?
    LMS 8.2 on Odroid-C4 - SqueezeAMP!, 5xRadio, 5xBoom, 2xDuet, 1xTouch, 1xSB3. Sonos PLAY:3, PLAY:5, Marantz NR1603, Foobar2000, ShairPortW, 2xChromecast Audio, Chromecast v1 and v2, Squeezelite on Pi, Yamaha WX-010, AppleTV 4, Airport Express, GGMM E5, RivaArena 1 & 3

  6. #6
    Quote Originally Posted by philippe_44 View Post
    argh... not good news then but thanks for investigating. Is there any chance you could try to play the same format all the time to see if there is a correlation?
    The SqueezeAMP (running 654) has been playing a mix of mp3 and flac (16/44.1) for 23h without a break now. But I'm not sure what you are asking - I could reflash the device to 1.689 and try playing a variety of formats if that's what you're asking. Or indeed reflash with successively newer firmware versions until the issue surfaces.

    But when I was running that version before, I couldn't detect an obvious pattern related to file format (or whether I used SPDIF or headphone output). Most of my music files are 16/44/1 flac files with some higher resolution flacs, or mp3s. Nor could I predict when the device would stop playing.

    As it stands just now, I seem to be back with a stable SqueezeAMP!

    Robert
    Home: Raspberry Pi 4/pCP7.0/LMS8.1.2/Material with files on QNAP TS-251A
    Touch > DacMagic 100 > Naim Audio Nait 3 > Mission 752 (plus Rega Planar 3 > Rega Fono Mini; Naim CD3)
    2 x Squeezebox Radios, 1 X Squeezebox 3 (retired), 1 x SqueezeAMP
    Office: LMS8.0.0 running on Raspberry Pi3; Raspberry Pi 3 player with touchscreen/piCorePlayer/IQaudIO DAC and Amp
    Portable: Raspberry Pi 3B/pCP7.0.1/LMS8.1.2/Material, files on Seagate portable drive, powered via power brick

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •