Mon BT ne fonctionne pas

[reptilo]

Merci,
Je viens d'essayer mais je bloque toujours lorsque je clique sur "Discover" j'ai ce message :
BT Controller Power
Turning the BT Controller power on...
No default controller available

Et le croix rouge sur "BT Controller is Off"

[Paul Webster]

If you have a HAT attached ... try (carefully) to remove it and see if Bluetooth then works.
If still not working ... put Raspberry Pi OS on an SD card and try that to see if there is really a hardware problem.

[reptilo]

Hi Paul Webster, what do you mean with HAT ? Is it the DAC and the Raspdac box ?
I already try de SD card with PCP on a RPI4 without fixing the BT problem.

[Paul Webster]

A HAT is the Raspberry Pi term for a card attached to the 40 GPIO pins.

[reptilo]

OK. So it's the Audiophonic iSabre DAC. When i tried with the RPI4 i didn't have it.
I would try with another RPI3 without this HAT.

[reptilo]

Je reviens après plusieurs mois d'absences sur ce sujet.
Je voudrais pouvoir connecter en BT mon Tel Android à mon PCP.
Mes infos :
piCorePlayer | piCorePlayer v8.0.0 | www v00016 | linux 5.10.42-pcpCore-v7 (32) | piCore v13.0 | Squeezelite v1.9.9-1386-pCP
RPI 2B
Test avec et sans Audiophonic iSabre DAC

Je n'arrive pas à démarrer le BT
BT Controller Power is off
Le diag :
[ 20.632926] Bluetooth: HCI device and connection manager initialized
[ 20.632961] Bluetooth: HCI socket layer initialized
[ 20.632981] Bluetooth: L2CAP socket layer initialized
[ 20.633026] Bluetooth: SCO socket layer initialized
[ 20.640442] Bluetooth: HCI UART driver ver 2.3
[ 20.640477] Bluetooth: HCI UART protocol H4 registered
[ 20.640674] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 20.641104] Bluetooth: HCI UART protocol Broadcom registered
[ 21.122992] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.123027] Bluetooth: BNEP filters: protocol multicast
[ 21.123074] Bluetooth: BNEP socket layer initialized

Merci de votre aide.