Results 11 to 14 of 14
Thread: simple portable player
-
2021-01-01, 10:06 #11
- Join Date
- Feb 2011
- Location
- Cheshire, UK
- Posts
- 5,457
-
2021-01-01, 10:18 #12
-
2021-01-03, 08:57 #13
- Join Date
- Feb 2011
- Location
- Cheshire, UK
- Posts
- 5,457
VB2.4 storage QNAP TS419p (NFS)
Living Room Joggler & Pi4/Khadas -> Onkyo TXNR686 -> Celestion F20s
Office Joggler & Pi3 -> Denon RCD N8 -> Celestion F10s
Dining Room SB Boom
Kitchen UE Radio (upgraded to SB Radio)
Bedroom (Bedside) Pi Zero+DAC ->ToppingTP21 ->AKG Headphones
Bedroom (TV) & Bathroom SB Touch ->Denon AVR ->Mordaunt Short M10s + Kef ceiling speakers
Guest Room Joggler > Topping Amp -> Wharfedale Modus Cubes
Everything controlled by iPeng & Material on iOS
-
2021-01-05, 08:00 #14
- Join Date
- Jun 2016
- Location
- Bretagne
- Posts
- 19
Mike, yes there are many routes to a portable, in fact to many to list but if you look at the main sites selling RPi boards and hats you will find many.
I addition there are addons to PiCorePlayer for screens of all sizes, buttons, shaft encoders.
https://bobrathbone.com/raspberrypi/...net_radio.html
I built one from a picoups board and a mono 3Watt hat on a PiZeroW, It's built into a short 110mm bend of pvc soil pipe, I wanted to call it pootube but management vetoed that so it's Bluetube, it'll connect to the house Wi-Fi almost 100m from the house. Of course without a screen and controls a phone is required to control it.
Good project to ward off cabin feaver.
Bonne chance...S