ANNOUNCE: piCorePlayer 7.0.0

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • paul-
    Senior Member
    • Jan 2013
    • 5675

    #16
    Make sure you are not on the sourceforge mirror, its been acting up again. On the bottom right of the screen it should say "pCP Main Repo"

    If you are on the main repo, can you tell me where you are located?
    piCorePlayer a small player for the Raspberry Pi in RAM.
    Homepage: https://www.picoreplayer.org

    Please donate if you like the piCorePlayer

    Comment

    • paul-
      Senior Member
      • Jan 2013
      • 5675

      #17
      Originally posted by kidstypike
      Paul, how do I upgrade to LMS 8.2?
      So if this is all working correctly....

      On the pCP LMS web page....Select Development branch
      Click image for larger version

Name:	2020-12-23_16-14.png
Views:	1
Size:	22.9 KB
ID:	1570706

      Then Click "Update LMS" and do the manual update. If you happen to want to change from Development back to Release or stable, you will need to check the "Allow Downgrade" option.

      Click image for larger version

Name:	2020-12-23_16-16.png
Views:	1
Size:	6.6 KB
ID:	1570707


      PS: Note I see I still have a timer on the Update LMS page redirect.....so don't stare too long at the screen before selecting "Manual Update"
      piCorePlayer a small player for the Raspberry Pi in RAM.
      Homepage: https://www.picoreplayer.org

      Please donate if you like the piCorePlayer

      Comment

      • hsmeets
        Senior Member
        • Jan 2007
        • 288

        #18
        Hi Paul,

        I’m in the Netherlands.

        Maybe I’m just overlooking it but where should that reference to the repo be?

        Click image for larger version

Name:	5BB51BE7-D016-41F9-9EAC-F9F635348B57.jpg
Views:	1
Size:	171.4 KB
ID:	1570708
        does the all-black SB sound better than the white SB?

        Comment

        • paul-
          Senior Member
          • Jan 2013
          • 5675

          #19
          I'm not sure how you have a screen looking like that, but your web interface is NOT from pcp6. You still have a pCP 5 web interface.

          Without knowing what happened over time, it would be best to start with a new image.
          piCorePlayer a small player for the Raspberry Pi in RAM.
          Homepage: https://www.picoreplayer.org

          Please donate if you like the piCorePlayer

          Comment

          • hsmeets
            Senior Member
            • Jan 2007
            • 288

            #20
            Originally posted by paul-
            I'm not sure how you have a screen looking like that, but your web interface is NOT from pcp6. You still have a pCP 5 web interface.

            Without knowing what happened over time, it would be best to start with a new image.
            Funny as it reports itself as 6.1.

            A few days ago I did an in-situ from 5 to 6.1. (Thus skipping 6.0)
            does the all-black SB sound better than the white SB?

            Comment

            • carsten_h
              Senior Member
              • Apr 2019
              • 746

              #21
              Originally posted by paul-
              Lets keep the Christmas presents coming!
              Two things are missing, that I need for using the Argon One case (pressing the button and control the fan):
              i2c-tools.tcz
              i2c-tools-dev.tcz (I don't know if this is really necessary)

              Is it possible to get them also to 7.0.0?
              Pi4 4GB piCorePlayer with LMS and Squeezelite for USB inside an Argon One case
              Pi3B+ (7" Display, Hifiberry DAC+ Pro) piCorePlayer with Squeezlite/Jivelite for Hifiberry inside a SmartiPi touch case
              Pi Zero W only for Bluetooth headphones
              Two Airport Express
              Ikea Symfonisk

              Comment

              • paul-
                Senior Member
                • Jan 2013
                • 5675

                #22
                That could be it....skipping 6.0.0 might have done it. First try to flush your browser cache...

                Then if you want to poke around, see if you still have /home/tc/www.

                If you do, do this.

                Code:
                rm -rf /home/tc/www
                sudo filetool.sh -b
                sudo reboot
                Otherwise, just start with a clean image.
                piCorePlayer a small player for the Raspberry Pi in RAM.
                Homepage: https://www.picoreplayer.org

                Please donate if you like the piCorePlayer

                Comment

                • paul-
                  Senior Member
                  • Jan 2013
                  • 5675

                  #23
                  Originally posted by carsten_h
                  Two things are missing, that I need for using the Argon One case (pressing the button and control the fan):
                  i2c-tools.tcz
                  i2c-tools-dev.tcz (I don't know if this is really necessary)

                  Is it possible to get them also to 7.0.0?
                  I just uploaded the version for 32 bit, I'll have to compile for 64bit......give me a little bit.
                  piCorePlayer a small player for the Raspberry Pi in RAM.
                  Homepage: https://www.picoreplayer.org

                  Please donate if you like the piCorePlayer

                  Comment

                  • kidstypike
                    Senior Member
                    • Feb 2007
                    • 6444

                    #24
                    Originally posted by paul-
                    So if this is all working correctly....

                    On the pCP LMS web page....Select Development branch
                    [ATTACH]32657[/ATTACH]

                    Then Click "Update LMS" and do the manual update. If you happen to want to change from Development back to Release or stable, you will need to check the "Allow Downgrade" option.

                    [ATTACH]32658[/ATTACH]


                    PS: Note I see I still have a timer on the Update LMS page redirect.....so don't stare too long at the screen before selecting "Manual Update"

                    Thanks Paul, but is this trying to upgrade to 8.2.0, or just the latest version of 8.1.0?

                    I wish to run 8.2.0 http://downloads.slimdevices.com/nig...ex.php?ver=8.2



                    Code:
                    [1;34m###############################################################
                    
                    
                      This script will update the Logitech Media Server extension  
                    
                    
                           Upgrading from devel branch.
                           Unattended Operation Enabled
                           Manual Download Link Check Enabled
                           Automatic Reload Enabled
                    ###############################################################
                    
                    
                    Press Enter to continue, or Ctrl-c to exit and change options[0;39m
                    [1;32mUpdateing Script from Github...
                    Connecting to raw.githubusercontent.com (199.232.56.133:443)
                    saving to '/tmp/slimupdate/lms-update.sh'
                    lms-update.sh        100% |********************************| 15780  0:00:00 ETA
                    '/tmp/slimupdate/lms-update.sh' saved
                    [1;32mRelaunching Script in 3 seconds[0;39m
                    [1;32mUpdateing Slimserver customizations from Github...
                    Connecting to raw.githubusercontent.com (151.101.16.133:443)
                    saving to '/tmp/slimupdate/custom-strings.txt'
                    custom-strings.txt   100% |********************************|  1180  0:00:00 ETA
                    '/tmp/slimupdate/custom-strings.txt' saved
                    Connecting to raw.githubusercontent.com (151.101.16.133:443)
                    saving to '/tmp/slimupdate/picore-update.html'
                    picore-update.html   100% |********************************|  1240  0:00:00 ETA
                    '/tmp/slimupdate/picore-update.html' saved
                    Connecting to raw.githubusercontent.com (151.101.16.133:443)
                    saving to '/tmp/slimupdate/Custom.pm'
                    Custom.pm            100% |********************************|  2697  0:00:00 ETA
                    '/tmp/slimupdate/Custom.pm' saved
                    Connecting to raw.githubusercontent.com (151.101.60.133:443)
                    saving to '/tmp/slimupdate/slimserver'
                    slimserver           100% |********************************|  3957  0:00:00 ETA
                    '/tmp/slimupdate/slimserver' saved
                    [1;33mCurrent Version is: 8.1.0 r1608700893.[0;39m
                    [1;33mNo update information returned from slimdevices.com.  There may not be current packages for the
                    release branch selected.[0;39m
                    Pi5 .. pCP 9beta5 .. LMS 8.4 -- nomysqueezebox
                    Study - Pi2B .. S.M.S.L SU-1 .. Q Acoustics M20
                    Snug/TV .. DAC32 .. Audio Engine B2
                    Spares - 1xSBTouch, 1xSB3, 4xRPi, AVI DM5 speakers

                    Comment

                    • carsten_h
                      Senior Member
                      • Apr 2019
                      • 746

                      #25
                      Originally posted by paul-
                      I just uploaded the version for 32 bit, I'll have to compile for 64bit......give me a little bit.
                      Wow that was fast. Thank you I will wait. Time is all we have in the moment...

                      The switch from 6.1.0 with LMS (data on a HFS+ SSD, therefore you need util-linux.tcz) to 7.0.0 was very simple and took only half an hour (longest part was to reenable the connection from my Home Assistant, so no piCorePlayer problem).
                      Great work!
                      Pi4 4GB piCorePlayer with LMS and Squeezelite for USB inside an Argon One case
                      Pi3B+ (7" Display, Hifiberry DAC+ Pro) piCorePlayer with Squeezlite/Jivelite for Hifiberry inside a SmartiPi touch case
                      Pi Zero W only for Bluetooth headphones
                      Two Airport Express
                      Ikea Symfonisk

                      Comment

                      • hsmeets
                        Senior Member
                        • Jan 2007
                        • 288

                        #26
                        I’ll give it a shot tomorrow. It’s evening now, tomorrow more time.

                        Originally posted by paul-
                        That could be it....skipping 6.0.0 might have done it. First try to flush your browser cache...

                        Then if you want to poke around, see if you still have /home/tc/www.

                        If you do, do this.

                        Code:
                        rm -rf /home/tc/www
                        sudo filetool.sh -b
                        sudo reboot
                        Otherwise, just start with a clean image.
                        does the all-black SB sound better than the white SB?

                        Comment

                        • slartibartfast
                          Senior Member
                          • Jan 2010
                          • 13173

                          #27
                          Originally posted by slartibartfast
                          I added a udev rule as described here

                          for my Topping E30 to my pCP 7 beta. Will this survive an update to stable. If not has the extension been added to pCP?

                          Sent from my Pixel 3a using Tapatalk
                          Any idea about this?

                          Sent from my Pixel 3a using Tapatalk
                          Living Room: Touch or Squeezelite (Pi3B) > Topping E30 > Audiolab 8000A > Monitor Audio S5 + BK200-XLS DF
                          Bedroom: Radio
                          Bathroom: Radio

                          Comment

                          • paul-
                            Senior Member
                            • Jan 2013
                            • 5675

                            #28
                            Originally posted by slartibartfast
                            I added a udev rule as described here

                            for my Topping E30 to my pCP 7 beta. Will this survive an update to stable. If not has the extension been added to pCP?

                            Sent from my Pixel 3a using Tapatalk
                            Yes, it should be fine. We don't delete added extensions.
                            piCorePlayer a small player for the Raspberry Pi in RAM.
                            Homepage: https://www.picoreplayer.org

                            Please donate if you like the piCorePlayer

                            Comment

                            • paul-
                              Senior Member
                              • Jan 2013
                              • 5675

                              #29
                              Originally posted by kidstypike
                              Thanks Paul, but is this trying to upgrade to 8.2.0, or just the latest version of 8.1.0?
                              Seems Michael missed something in his process.....Its a completely new process.

                              These are the xml files that we use to figure out what to do.


                              piCorePlayer a small player for the Raspberry Pi in RAM.
                              Homepage: https://www.picoreplayer.org

                              Please donate if you like the piCorePlayer

                              Comment

                              • paul-
                                Senior Member
                                • Jan 2013
                                • 5675

                                #30
                                Originally posted by carsten_h
                                Wow that was fast. Thank you I will wait. Time is all we have in the moment...

                                The switch from 6.1.0 with LMS (data on a HFS+ SSD, therefore you need util-linux.tcz) to 7.0.0 was very simple and took only half an hour (longest part was to reenable the connection from my Home Assistant, so no piCorePlayer problem).
                                Great work!
                                i2c-tools for aarch64 is up now too.
                                piCorePlayer a small player for the Raspberry Pi in RAM.
                                Homepage: https://www.picoreplayer.org

                                Please donate if you like the piCorePlayer

                                Comment

                                Working...