Home of the Squeezebox™ & Transporter® network music players.
Results 1 to 10 of 12

Hybrid View

  1. #1
    Junior Member
    Join Date
    Oct 2020
    Location
    Hamburg
    Posts
    8

    Removing sticky coating from remote control: Best practise?

    Just managed to open two remote controls with a nylon tool.

    What is the best way to remove the sticky coating from the top? Isopropanol 99,9 % seems to work, but will it kill the Logitech logo? Is there a better solution?

    If the coating is removed: Do I paint the piece with a transparent lacquer? Or do I just keep it like it is?

    Thanks.

  2. #2
    Senior Member KeBul's Avatar
    Join Date
    Sep 2009
    Location
    London
    Posts
    286
    If you clean the old sticky rubber off completely you will lose any symbols or logos.

    You could try a clear rubber coating spray over the top of the original, I did the rubber coated parts of a Boom renovation with a clear rubber coating spray, not the easiest thing I've ever done but pleased with the result:

    Name:  IMG_5358vsm.jpg
Views: 512
Size:  142.0 KB

    Here's the Boom before:

    Name:  Boom_Beforevsm.jpg
Views: 515
Size:  177.1 KB

    Certainly the rubber coated bits are no longer sticky and the feel is the same as original, but I can't say how long it will last.

    One of the guys on here suggested that if you wash the original rubber coating in pretty hot water first it cleans it up well enough to be sprayed once it has air dried. Worked reasonably well on fascia panel and buttons of my Boom project.
    Because it has no symbols I used the knob as a test piece trying various chemicals to see if any could provide a miracle clean - ended up trashing the coating completely so stripped it right back to plastic, then polished and rubber coating sprayed it.

    Good luck

    Kev

    PS: Just found Chill's post where he outlines this procedure and the product he used in much more detail...

    https://forums.slimdevices.com/showt...nt-panel/page3
    Last edited by KeBul; 2020-10-22 at 15:12.

  3. #3
    Junior Member
    Join Date
    Oct 2020
    Location
    Hamburg
    Posts
    8
    Ok, but I'm talking about the remote control of the Squeezebox Touch. I think that these different devices are reacting differently on cleaning.

  4. #4
    Senior Member kidstypike's Avatar
    Join Date
    Feb 2007
    Location
    Brindle
    Posts
    4,394
    Quote Originally Posted by pixx View Post
    Ok, but I'm talking about the remote control of the Squeezebox Touch. I think that these different devices are reacting differently on cleaning.
    https://forums.slimdevices.com/showt...ear-Of-A-Touch

    https://forums.slimdevices.com/showt...remote-control
    Server - LMS 8.2.0 Pi4B 4GB/Argon one case/pCP v7.0.1 - 75K library, playlists & LMS cache on SSD (ntfs)
    Study - Pi3B/pCP 7.0.1/pi screen/AlloBoss DAC HAT/Ruark MR1 Mk2
    Lounge - Pi2/pCP 6.0.0 > HiFiBerry DIGI+ > AudioEngine DAC1 > AVI DM5
    Dining Room - Pi3B/pCP/Bluetooth/Echo Show 8
    Garage - DAC32 > Edifier speakers

    Spares - 2xTouch, 1xSB Radio. 1xSB3, 6xRPi

  5. #5
    Senior Member KeBul's Avatar
    Join Date
    Sep 2009
    Location
    London
    Posts
    286
    Quote Originally Posted by pixx View Post
    Ok, but I'm talking about the remote control of the Squeezebox Touch. I think that these different devices are reacting differently on cleaning.
    Having Touch's, Radios and Booms plus remotes for all I would say the original rubber coating used on buttons, knobs & fascias on all of those devices is the same and all deteriorate and become sticky to some degree. The rubber pad on top of the Boom, is just that a moulded pad fixed in place with double sided tape and that does not suffer from sticky deterioration.

    So for example, stripping down the Boom front panel leaves a rubber coated piece of plastic with holes for the buttons, exactly the same as the top of a Touch remote body. The buttons are the same as a typical remote style flexible silicon rubber keypad, just like the Touch remote keypad.

    The second link from Kidstypike has an interesting tip using silicon remover which removes the sticky layer but not the lettering. I've got some silicon remover, might try that one day on one of my spare sticky remotes. I'll still respray it with the rubber coating though - nice to get that original feel back and I've got 3 cans of it!

    Kev
    Last edited by KeBul; 2020-10-23 at 03:27.

  6. #6
    Senior Member kidstypike's Avatar
    Join Date
    Feb 2007
    Location
    Brindle
    Posts
    4,394
    Quote Originally Posted by KeBul View Post
    Having Touch's, Radios and Booms plus remotes for all I would say the original rubber coating used on buttons, knobs & fascias on all of those devices is the same and all deteriorate and become sticky to some degree. The Rubber pad on top of the Boom, is just that a moulded pad fixed in place with double sided tape and that does not suffer from sticky deterioration.

    So for example, stripping down the Boom front panel leaves a rubber coated piece of plastic with holes for the buttons, exactly the same as the top of a Touch remote body. The buttons are the same as a typical remote style flexible silicon rubber keypad, just like the Touch remote keypad.

    Kev
    The ruddy stuff should be banned!
    Server - LMS 8.2.0 Pi4B 4GB/Argon one case/pCP v7.0.1 - 75K library, playlists & LMS cache on SSD (ntfs)
    Study - Pi3B/pCP 7.0.1/pi screen/AlloBoss DAC HAT/Ruark MR1 Mk2
    Lounge - Pi2/pCP 6.0.0 > HiFiBerry DIGI+ > AudioEngine DAC1 > AVI DM5
    Dining Room - Pi3B/pCP/Bluetooth/Echo Show 8
    Garage - DAC32 > Edifier speakers

    Spares - 2xTouch, 1xSB Radio. 1xSB3, 6xRPi

  7. #7
    Senior Member KeBul's Avatar
    Join Date
    Sep 2009
    Location
    London
    Posts
    286
    Quote Originally Posted by kidstypike View Post
    The ruddy stuff should be banned!
    Yeah maybe, but to be fair my Boom was purchased in 2009 and at 11 years old must be one of, if not the, the oldest serving pieces of electronics in the house. So I grant it the right to deteriorate a little bit. Also I think that rubber coating originally gave the devices that little bit of "look and tactile edge" that oozed quality over say the Sonos of that time, I remember trying the Sonos remote back then and it seemed cheap and plasticky, the SB Controller felt and looked so much better.

    I suppose I can't quite defend the longevity of the Touch remotes them being somewhat newer.

    Kev
    Last edited by KeBul; 2020-10-23 at 05:56.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •