Having cranked the Boom back into life with so much help from Forum members (esp. Michael), i am left with one last small issue. The presets won't work properly. Having set the six I want, I find if I go from one to another, it tends to take the station I was last listening to with it, so I wind up with the same station on buttons 3, 4, 5, and 6. For some reason, preset buttons 1 & 2 hold the stations in memory. I've tried a factory reset, but that didn't fix things. Not a massive problem, but if there is a simple solution, I'd be happy to know what it is.
Allen
Results 1 to 8 of 8
Thread: Boom Presets
-
2020-08-18, 08:37 #1
- Join Date
- Aug 2011
- Posts
- 66
Boom Presets
-
2020-08-18, 09:07 #2Server - LMS 8.2.0 Pi4B 4GB/Argon one case/pCP v7.0.1 - 75K library, playlists & LMS cache on SSD (ntfs)
Study - Pi3B/pCP 7.0.1/pi screen/Hifiberry DAC HAT Ruark MR1 Mk2
Lounge - Pi2/pCP 6.0.0 > HiFiBerry DIGI+ > AudioEngine DAC1 > AVI DM5
Garage - Squeezebox Boom + Fostex sub
Dining Room - Pi3B/Bluetooth/Echo Show 8
Spares - 2xTouch, 1xSB Radio. 1xSB3, 6xRPi
-
2020-08-19, 07:21 #3
- Join Date
- Aug 2011
- Posts
- 66
Boom Presets
Well I've tried that. LMS is shown as running, but when I reach the page you show, if I click on Players I see the message "The Player was not found". I've tried everything I can think of, including resetting the account with a new password. Even tried a factory reset, but no luck. I've just noticed too, that what appears to be happening which is very confusing is that when i press one of the preset buttons, the Boom connects to the correct station, but shows a totally different one on the display. The display also reverts to the date and time after a few seconds. I'm sure it used to show the station detail as a continuous crawl across the screen.
Last edited by Allen; 2020-08-19 at 07:36. Reason: new information.
-
2020-08-19, 07:34 #4Server - LMS 8.2.0 Pi4B 4GB/Argon one case/pCP v7.0.1 - 75K library, playlists & LMS cache on SSD (ntfs)
Study - Pi3B/pCP 7.0.1/pi screen/Hifiberry DAC HAT Ruark MR1 Mk2
Lounge - Pi2/pCP 6.0.0 > HiFiBerry DIGI+ > AudioEngine DAC1 > AVI DM5
Garage - Squeezebox Boom + Fostex sub
Dining Room - Pi3B/Bluetooth/Echo Show 8
Spares - 2xTouch, 1xSB Radio. 1xSB3, 6xRPi
-
2020-08-19, 07:43 #5
- Join Date
- Aug 2011
- Posts
- 66
Ah. I see what you mean, I think. If I connect to LMS, then it doesn't want to play anything. It just shows the station. It used to be so simple, and I never had these problems when I first got it. I'll check out the LMS Display page and see whether it now shows the Player has been found and re post. Thanks for your patience and help.
Allen
-
2020-08-19, 08:24 #6
- Join Date
- Aug 2011
- Posts
- 66
Boom Presets
I've switched to LMS, but nothing plays. I've clicked on "My Presets" on the Boom, But get a message "Error on HTTP Socket".
Allen
-
2020-08-19, 09:40 #7
- Join Date
- Jan 2010
- Location
- Hertfordshire
- Posts
- 6,246
-
2020-08-20, 00:48 #8
- Join Date
- Aug 2011
- Posts
- 66