ANNOUNCE: Squeezelite-ESP32 (dedicated thread)

[mboxler]

I updated my firmware to 546, and had trouble with the NVS screen, as the bottom Reboot and fw: I2S-4MFlash.546.master-cmake, mode: squeezelite, SSID: xxxxxxxxxxxxxx, IP: xxxxxxxxxxxxxx "banner" covers the buttons at the bottom of the screen. Just tried 552 and have the same problem. Should I be using different firmware? Tried searching NVS but had no luck.

Thanks, Mike

[philippe_44]

I updated my firmware to 546, and had trouble with the NVS screen, as the bottom Reboot and fw: I2S-4MFlash.546.master-cmake, mode: squeezelite, SSID: xxxxxxxxxxxxxx, IP: xxxxxxxxxxxxxx "banner" covers the buttons at the bottom of the screen. Just tried 552 and have the same problem. Should I be using different firmware? Tried searching NVS but had no luck.

Thanks, Mike

It's a small bug that I think @sle118 has already fixes locally. You should be able to click just on the visible part of the button, though

[mboxler]

It's a small bug that I think @sle118 has already fixes locally. You should be able to click just on the visible part of the button, though

I figured as such. I should have also asked how the four buttons are labeled. There are three light blue on the left side of the screen and a dark blue
on the right. I can click on them but have no idea which is which.

[sle118]

I figured as such. I should have also asked how the four buttons are labeled. There are three light blue on the left side of the screen and a dark blue
on the right. I can click on them but have no idea which is which.

The upcoming changes should come soon enough. Thank you for your patience!

[mboxler]

Thanks! This is all I get with a connected and working SSD1306 display

Executing

0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

I established a Putty session. When I execute the Scan I2C bus for devices command I get dozens of this message...

E (145503) i2c: /opt/esp/idf/components/driver/i2c.c:1273 (i2c_master_cmd_begin):i2c driver not installed

Is this a clue to my issue?

I2S-4MFlash.546.master-cmake

Thanks, Mike

[sle118]

I established a Putty session. When I execute the Scan I2C bus for devices command I get dozens of this message...

E (145503) i2c: /opt/esp/idf/components/driver/i2c.c:1273 (i2c_master_cmd_begin):i2c driver not installed

Is this a clue to my issue?

I2S-4MFlash.546.master-cmake

Thanks, Mike

Please share your configuration so I can have a look. Driver not installed seems to indicate that i2c is misconfigured. My main dev desktop's power supply died yesterday so I will need to go from memory for a couple of days

[mboxler]

Please share your configuration so I can have a look. Driver not installed seems to indicate that i2c is misconfigured. My main dev desktop's power supply died yesterday so I will need to go from memory for a couple of days

Thank you for the help (and everything else you do for that matter). I assumed that since the display was working that I had I2c
configured properly.

NVS Editor

display_config I2C:width=128,height=32,address=60,driver=SSD1306, HFlip,VFlip

i2c_config scl=22,sda=21,speed=100000,port=1

[martymcbro]

Hi folks,

I got me a ESP32-A1S Audio development Kit (this one: https://www.exp-tech.de/plattformen/...evelopment-kit) to test your great project.

Yesterday I tried to build Squeezelite-esp32 myself using a native Installation of esp-idf (on Pop!_OS 20.10) and also using the provided docker image, both with no success so far.
I will have a deeper look into it and come back to you if I need further assistance with building from source.

For now my question is where I can find the precompiled binaries.
I read that sle118 "removed the release binaries all the way to 539", however I still can't find any release binaries at all.

I have looked through the archives here https://github.com/sle118/squeezelite-esp32/tags
But as I am a new to your project, I don't know where and what to look for exactly.
Maybe someone can point me to the most recent binaries for my board that I'm supposed to use.

Thanks in advance

[chill]

Click the button next to Tags to go to Releases: https://github.com/sle118/squeezelite-esp32/releases

Then expand the assets below the block of text.

[martymcbro]

Click the button next to Tags to go to Releases: https://github.com/sle118/squeezelite-esp32/releases

Then expand the assets below the block of text.

Thank you. This is actually not so hard to find.
I have to open my eyes next time