Hi,
im use raspberry zero+pcm5102+picoplayer v6.0. added ir receiver, install jivelite,kernel keytables for ir.
With command "ir-keytable -t" read remote code, make table and upload in jivelite ir tools.
------
table: samsung, type: nec
0x70714 KEY_MINUS
0x7076c KEY_EQUAL
-------
i see keytable is loaded and recognized:
-------
497.490136: lirc protocol(necx): scancode = 0x70714
497.490203: event type EV_MSC(0x04): scancode = 0x70714
497.490203: event type EV_KEY(0x01) key_down: KEY_MINUS(0x000c)
497.490203: event type EV_SYN(0x00).
495.010092: lirc protocol(necx): scancode = 0x7076c
495.010171: event type EV_MSC(0x04): scancode = 0x7076c
495.010171: event type EV_KEY(0x01) key_down: KEY_EQUAL(0x000d)
495.250138: event type EV_SYN(0x00)
--------
just nothing heapen.... i trying another keys - the same. trought ssh i see keyatable is loaded, protocol is "nec" all keypresses showing KEY_EQUAL(0x000d),KEY_MINUS(0x000c) etc. just not reaction from picoreplayer.
where can be problem?