Home of the Squeezebox™ & Transporter® network music players.
Results 1 to 6 of 6
  1. #1

    Access to lms.cgi stuck in piCorePlayer interface

    Hi all
    First thank you for piCorePlayer !!

    I updated today pCP to version 6.0 and I am experiencing an issue.
    I can not access to the picoreplayer tab :lms.cgi, it's like charging but not responding (I tried on several browser and reboot twice LMS)
    I can access to LMS (7.9.2) via the ip address with 192.168.X.XX:9000 but not the setting tab in the picoreplayer interface (192.168.X.XX/cgi-bin/lms.cgi).
    Every other tabs are working, just this one.
    LMS is working (I am listening to the music right now).

    Do you have any idea about what is happening?

    Thank you and have a good day
    Last edited by Themightybob; 2020-03-23 at 07:40.

  2. #2
    Senior Member
    Join Date
    Jan 2011
    Location
    Staffordshire. UK
    Posts
    3,186
    No idea, but there is a log

    Name:  upgradelogpcp.jpg
Views: 62
Size:  197.7 KB

    but I think this is only after the update

    It is possible to do a new update over the one you have just done (i have just done that myself, to look for logs)

    Otherwise wait until someone who knows what they are doing comes along

    you can check the boot log

  3. #3
    Hi Man in a Van,

    thanks for your reply.

    How do you access to the log?
    I have these tabs when I access to the picore player ip address
    Name:  Capture.PNG
Views: 53
Size:  69.5 KB

    I will try a new clean install later today, just to check

    Cheers

  4. #4
    Senior Member paul-'s Avatar
    Join Date
    Jan 2013
    Posts
    2,912
    If you have network shares setup, this sometimes will cause delays if the network server is not responding.
    piCorePlayer a small player for the Raspberry Pi in RAM.
    Homepage: https://www.picoreplayer.org

    Please donate if you like the piCorePlayer

  5. #5
    Senior Member
    Join Date
    Jan 2011
    Location
    Staffordshire. UK
    Posts
    3,186
    Quote Originally Posted by Themightybob View Post
    Hi Man in a Van,

    thanks for your reply.

    How do you access to the log?


    I will try a new clean install later today, just to check

    Cheers

    Main page > scroll down to Diagnostics


    ronnie

  6. #6
    Thanks Ronnie for the pathway. Very useful indeed.

    I do have network shares and the server is responding.

    I finally had access to the lms.cgi via my PC wired-connected to my internet box. It will be fine like this.
    It seems to be a wifi issue. Maybe because of the mix of the 2,3GHZ and 5GHZ in the wifi setup.

    Thanks a lot for all your help.

    Cheers

    Bob

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •