Home of the Squeezebox™ & Transporter® network music players.
Page 3 of 20 FirstFirst 1234513 ... LastLast
Results 21 to 30 of 196
  1. #21
    really not sure whats going wrong for you
    i did a quick build from scratch with a 0.96"
    two really short videos in the repo
    as you can see we're running problem free
    i'm working on removing the library dependencies, version 2/3 of the monitor statically linked the libraries into the executable which was one of the first things i removed.
    obviously this version does far more than 2/3 so is a tiny bit more complex but not that much
    some exception/validation messages are output but thats only if you run from command line
    times tight for the remainder of the week but i'll see if i can come up with a debug build and hopefully get some additional info from your setup

  2. #22
    Quote Originally Posted by shunte88 View Post
    really not sure whats going wrong for you
    i did a quick build from scratch with a 0.96"
    two really short videos in the repo
    as you can see we're running problem free
    i'm working on removing the library dependencies, version 2/3 of the monitor statically linked the libraries into the executable which was one of the first things i removed.
    obviously this version does far more than 2/3 so is a tiny bit more complex but not that much
    some exception/validation messages are output but thats only if you run from command line
    times tight for the remainder of the week but i'll see if i can come up with a debug build and hopefully get some additional info from your setup
    Could be some of the extensions that you have are more than default and not mentioned of?

  3. #23
    not sure I'm getting your statement/question but ldd describes all dependencies

    quick question, did you get my version o run but nothing displayed?

  4. #24
    Quote Originally Posted by shunte88 View Post
    not sure I'm getting your statement/question but ldd describes all dependencies

    quick question, did you get my version o run but nothing displayed?
    Yes I have the newest install from the scratch.
    Here is the ldd result
    tc@piCorePlayer:/mnt/mmcblk0p2/tce$ ldd lmsmonitor
    linux-vdso.so.1 (0x7ecea000)
    libpthread.so.0 => /lib/libpthread.so.0 (0x76f84000)
    librt.so.1 => /lib/librt.so.1 (0x76f6d000)
    libwiringPi.so => /usr/local/lib/libwiringPi.so (0x76f4e000)
    libArduiPi_OLED.so.1 => /lib/libArduiPi_OLED.so.1 (0x76f33000)
    libstdc++.so.6 => /usr/lib/libstdc++.so.6 (0x76de6000)
    libm.so.6 => /lib/libm.so.6 (0x76d79000)
    libgcc_s.so.1 => /usr/lib/libgcc_s.so.1 (0x76d4a000)
    libc.so.6 => /lib/libc.so.6 (0x76c09000)
    /lib/ld-linux-armhf.so.3 (0x76fad000)
    libcrypt.so.1 => /lib/libcrypt.so.1 (0x76bca000)
    libi2c.so.0 => /usr/local/lib/libi2c.so.0 (0x76bb8000)

  5. #25
    looks good

    Code:
    cat /usr/local/sbin/config.cfg | grep "^NAME=" | cut -d'"' -f2
    will give you your setup name

    paste the name returned
    into the following command where its says name_here, and see what output you get when a track is played

    keep the name in quotes so any spaces are retained

    Code:
    sudo killall lmsmonitor
    sudo ./lmsmonitor -n "name_here" -rcxtiv -m sa
    paste whats returned in a reply

  6. #26
    Quote Originally Posted by shunte88 View Post
    looks good

    Code:
    cat /usr/local/sbin/config.cfg | grep "^NAME=" | cut -d'"' -f2
    will give you your setup name

    paste the name returned
    into the following command where its says name_here, and see what output you get when a track is played

    keep the name in quotes so any spaces are retained

    Code:
    sudo killall lmsmonitor
    sudo ./lmsmonitor -n "name_here" -rcxtiv -m sa
    paste whats returned in a reply

    tc@piCorePlayer:~$ cd /mnt/mmcblk0p2/tce
    tc@piCorePlayer:/mnt/mmcblk0p2/tce$ cat /usr/local/sbin/config.cfg | grep "^NAME
    =" | cut -d'"' -f2
    piCorePlayer
    tc@piCorePlayer:/mnt/mmcblk0p2/tce$ sudo killall lmsmonitor
    tc@piCorePlayer:/mnt/mmcblk0p2/tce$ sudo ./lmsmonitor -n piCorePlayer -rcxtiv -m
    sa
    This is ./lmsmonitor, compiled Mar 18 2020 00:29:33.
    Sending LMS Discovery ...
    LMS (Server) responded:
    Server IP ....: 192.168.133.92:3483
    Player Name ..: piCorePlayer
    Player ID ....: b8:27:eb:03:8c:e7
    Player IP ....: 192.168.133.123
    Initializing SHMEM ...
    SHMEM Actively Monitoring ...
    _____________________
    88.5 | The Jewel 88.5 (Adult Hits)

    _____________________
    JEWEL 88.5
    Dave Creelman
    JEWEL 88.5
    _____________________
    JEWEL 88.5
    Dave Creelman
    _____________________
    KENNY ROGERS And DOTTY WEST
    ALL I EVER NEED IS YOU
    _____________________
    KENNY ROGERS And DOTTY WEST
    ALL I EVER NEED IS YOU
    _____________________
    KENNY ROGERS And DOTTY WEST
    ALL I EVER NEED IS YOU
    _____________________
    KENNY ROGERS And DOTTY WEST
    ALL I EVER NEED IS YOU
    _____________________
    KENNY ROGERS And DOTTY WEST
    ALL I EVER NEED IS YOU

    This player's IP address is 192.168.133.121

  7. #27
    and nothing on the OLED?

    none of the display setup code changed... odd

    ok, let me look at getting you a debug version

    again, I'm short on time so may be the weekend

  8. #28
    you said IP is 192.168.133.121 but the output is ..133.123

    it detected the same device, shmem uses the players Id (MAC)

    so is 121 a typo? check with:

    Code:
    ifconfig
    do you have other squeeze devices called piCorePlayer?

    try changing the name through the web end so its unique, and then repeat with the new name

    you should be seeing the logo if the screen is initializing as expected? any logo?
    Last edited by shunte88; 2020-03-19 at 12:20.

  9. #29
    Quote Originally Posted by shunte88 View Post
    you said IP is 192.168.133.121 but the output is ..133.123

    it detected the same device, shmem uses the players Id (MAC)

    so is 121 a typo? check with:

    Code:
    ifconfig
    do you have other squeeze devices called piCorePlayer?

    try changing the name through the web end so its unique, and then repeat with the new name

    you should be seeing the logo if the screen is initializing as expected? any logo?
    the ip is correct. There is nothing on the display at all.
    All the player have their own name and I even change the Host Name too.

  10. #30
    Quote Originally Posted by anadigi View Post
    the ip is correct. There is nothing on the display at all.
    All the player have their own name and I even change the Host Name too.
    After I reboot my server the ip is correct but still no display!

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •