Home of the Squeezebox™ & Transporter® network music players.
Page 2 of 102 FirstFirst 12341252 ... LastLast
Results 11 to 20 of 1013
  1. #11
    Senior Member paul-'s Avatar
    Join Date
    Jan 2013
    Posts
    3,254
    Quote Originally Posted by carsten_h View Post
    A few hours later I have to say that my Pi 3B+ is restarting suddendly when hearing radio. Sometimes after reboot it is working again, but sometimes there is no Wifi connection. On this Pi Squeezelite, Jivelite, Bluetooth and Wifi are activated and attached are a Hifiberry DAC+ Pro and a 7ô display.
    The LMS server is running on the Pi 4.
    WiFi and Bluetooth is always sketchy on a pi. If the WiFi is connected on a 5G channel is the most stable, but 2.4 is really a crapshoot.
    piCorePlayer a small player for the Raspberry Pi in RAM.
    Homepage: https://www.picoreplayer.org

    Please donate if you like the piCorePlayer

  2. #12
    Senior Member
    Join Date
    Oct 2010
    Posts
    248
    Great news ! Cp 6.0 is out

    I updated one Pi 4 with LMS and 6.0.0rc1 and one PI 4 with 6.0.0rc1 audio. In both cases everything went very well, only the setting HDMI=off was after update "on".

    Tank you for this wonderfull software !

  3. #13
    Senior Member paul-'s Avatar
    Join Date
    Jan 2013
    Posts
    3,254
    Turning HDMI on during an update is by design. In case there is a boot issue, you can connect a monitor.
    piCorePlayer a small player for the Raspberry Pi in RAM.
    Homepage: https://www.picoreplayer.org

    Please donate if you like the piCorePlayer

  4. #14
    Senior Member
    Join Date
    Oct 2010
    Posts
    248
    Quote Originally Posted by paul- View Post
    Turning HDMI on during an update is by design. In case there is a boot issue, you can connect a monitor.
    now i understand

  5. #15
    Senior Member
    Join Date
    Apr 2019
    Location
    Wunstorf, Germany
    Posts
    330
    Quote Originally Posted by paul- View Post
    If the WiFi is connected on a 5G channel is the most stable, but 2.4 is really a crapshoot.
    I am using a 5Ghz channel. Very strange are the spontaneous reboots without interaction.

  6. #16
    Senior Member
    Join Date
    Mar 2017
    Posts
    1,938

    BT USB dongle not recognized?

    I have a USB BT dongle, which works under raspbian, however pCP does not seem to recognise it. dmesg shows:

    Code:
    [  123.390685] Bluetooth: Core ver 2.22
    [  123.390800] NET: Registered protocol family 31
    [  123.390808] Bluetooth: HCI device and connection manager initialized
    [  123.390833] Bluetooth: HCI socket layer initialized
    [  123.390845] Bluetooth: L2CAP socket layer initialized
    [  123.390893] Bluetooth: SCO socket layer initialized
    [  123.473677] usbcore: registered new interface driver btusb
    [  123.608460] Bluetooth: hci0: BCM: chip id 63
    [  123.616449] Bluetooth: hci0: BCM: features 0x07
    [  123.744436] Bluetooth: hci0: BCM20702A
    [  123.752562] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
    [  123.752716] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-050d-065a.hcd failed with error -2
    [  123.752730] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-050d-065a.hcd not found
    How can I add "brcm/BCM20702A1-050d-065a.hcd" to pCP?
    Material debug: 1. Launch via http: //SERVER:9000/material/?debug=json 2. Open browser's developer tools 3. Open console tab in developer tools 4. REQ/RESP messages sent to/from LMS will be logged here.

  7. #17
    Senior Member
    Join Date
    Mar 2017
    Posts
    1,938
    Quote Originally Posted by cpd73 View Post
    I have a USB BT dongle, which works under raspbian, however pCP does not seem to recognise it.
    Hmmm... OK, rebooted again, and now it seems to be recognised. Sorry for the noise.
    Material debug: 1. Launch via http: //SERVER:9000/material/?debug=json 2. Open browser's developer tools 3. Open console tab in developer tools 4. REQ/RESP messages sent to/from LMS will be logged here.

  8. #18
    Senior Member
    Join Date
    Sep 2009
    Location
    Norway
    Posts
    254
    Quote Originally Posted by paul- View Post
    After nearly 8 months in beta, the pCP team is happy to announce the official release of piCorePlayer 6.0.0
    Yabba dabba doo!

    /Claus

  9. #19
    Senior Member
    Join Date
    Dec 2005
    Location
    Sutton Coldfield, UK
    Posts
    705
    Quote Originally Posted by paul- View Post
    Turning HDMI on during an update is by design. In case there is a boot issue, you can connect a monitor.
    I was unaware of this and hadn't noticed. I did notice that CPU temp had risen by 5 degrees when playing a track on a non HDMI player though. Is there any way that a reminder can be put in the update process to prevent un-necessary power usage and temperature? I've re-set my players accordingly but could catch others out.
    Music Store & VPN Server: Synology DS215J NAS
    Home Server/Study Player:
    LMS 8.0.0 on Pi 4 pCp 6.1.0 Server/IQ Audio DAC+
    Refurbished 1962 RCA Stereo Console Server/Player LMS 8.0.0 on Pi 4B pCp 6.1.0 Server/IQ Audio DAC+
    Headphone Players: x2: pCp 6.1.0 on Pi 3B /IQ Audio DAC+
    Streamer/Player pCp 6.1.0 on Pi 3B/IQ Audio Codec+
    Homeplug/LAN Players: x2: Squeezelite on Windows 10 PC.
    VPN Mobile & Car Player: Material/SqueezePlayer on Android Phone

  10. #20
    Junior Member
    Join Date
    Mar 2011
    Posts
    3

    Not able to set NoMySB

    hi first of all thanks for all the effort, I have been running piCorePlayer for a while now on a RPi3.

    Now testing the 6.0.0 on a brand new RPi4, but the LMS page, besides loading quite slow, refuses to let me set "No MySB" to "Yes". It always comes back as "No"

    Any ideas? For now I keep the RPi3 as server for a while, I first need a somewhat more silent fan for it, which can connect to the 3V... its too noisy now anyway.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •