ANNOUNCE: piCorePlayer 6.0.0

[scooper]

I've tried the HifiBerry OS and whilst I can get it to run, there's nothing coming out of either output of the Digi+. I think the Pi isn't communicating properly. Perhaps it's a faulty board...

[Howard Passman]

As a last resort I would try reloading pCP. You can do an image backup using the new routine or you can load it on to a second SD card. That way if it's not the issue you're not out too much time.

Unless you have another pi lying about.

Good luck.

Howard

I've tried the HifiBerry OS and whilst I can get it to run, there's nothing coming out of either output of the Digi+. I think the Pi isn't communicating properly. Perhaps it's a faulty board...

[scooper]

As a last resort I would try reloading pCP. You can do an image backup using the new routine or you can load it on to a second SD card. That way if it's not the issue you're not out too much time.

Unless you have another pi lying about.

Good luck.

Howard

Thanks - I did try reloading pCP but without success.

[Howard Passman]

Wlep, if the sound board is known to be good and you've tried everything else, it might be time to replace the RPI. Hope they'll swap it out for you.

Howard

Thanks - I did try reloading pCP but without success.

[Man in a van]

@scooper

Try the Raspberry PI OS Desktop

https://downloads.raspberrypi.org/ra...ster-armhf.zip

1) Load the overlay into the bottom of /boot/config.txt and reboot.

Info: Configures the HifiBerry Digi+ Pro audio card

Load: dtoverlay=hifiberry-digi-pro

Params: <None>

Name: hifiberry-digi-pro

2) Select it as default output in the Desktop (right click the volume icon)

3) Open the web browser and play a radio station, choose fip or radio paradise



maybe try this tomorrow if you feel like it

ronnie

[scooper]

@scooper

maybe try this tomorrow if you feel like it

ronnie

Thanks for the suggestions Ronnie. This might be something to tackle tomorrow

[scooper]

Thanks for the suggestions Ronnie. This might be something to tackle tomorrow

Tried that too and it still won't work. At this point I'll just see if I can get the board replaced.
Thanks for all the suggestions.

[Man in a van]

Tried that too and it still won't work. At this point I'll just see if I can get the board replaced.
Thanks for all the suggestions.

That's a PITA !

Keep us updated please

ronnie