Home of the Squeezebox™ & Transporter® network music players.
Page 4 of 5 FirstFirst ... 2345 LastLast
Results 31 to 40 of 49
  1. #31
    Senior Member M-H's Avatar
    Join Date
    Oct 2016
    Location
    Western Europe
    Posts
    199
    Just tested the B+
    Though it is working ( network reachable, music playing over wifi and Cirrus Logic Audio Card :-) )
    there is a lot of chatter going on in dmesg, Not analysed all of it, but it might be the driver is in a verbose beta mode or it is really detecting some issue's.
    let me paste in a part so you can see it too:
    Code:
    [    1.963658] usb 1-1: new high-speed USB device number 2 using dwc_otg
    [    1.963899] Indeed it is in host mode hprt0 = 00001101
    [    2.284248] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
    [    2.284272] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [    2.285535] hub 1-1:1.0: USB hub found
    [    2.285726] hub 1-1:1.0: 5 ports detected
    [    2.603655] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
    [    2.734187] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
    [    2.734210] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [    2.737599] smsc95xx v1.0.6
    [    2.844456] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:c6:56:11
    [    2.943662] usb 1-1.2: new high-speed USB device number 4 using dwc_otg
    [    3.075322] usb 1-1.2: New USB device found, idVendor=0bda, idProduct=f179, bcdDevice= 0.00
    [    3.075347] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [    3.075358] usb 1-1.2: Product: 802.11n
    [    3.075369] usb 1-1.2: Manufacturer: Realtek
    [    3.075379] usb 1-1.2: SerialNumber: 00E0262E538D
    [    5.785984] zram: Added device: zram0
    [    5.872669] zram0: detected capacity change from 0 to 118427648
    [    5.887396] random: mkswap: uninitialized urandom read (16 bytes read)
    [    5.905787] Adding 115648k swap on /dev/zram0.  Priority:-2 extents:1 across:115648k SSFS
    [    6.682639] squashfs: version 4.0 (2009/01/31) Phillip Lougher
    [    8.131715] EXT4-fs (mmcblk0p2): warning: mounting fs with errors, running e2fsck is recommended
    [    8.148805] EXT4-fs (mmcblk0p2): recovery complete
    [    8.156995] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
    [    8.302046] EXT4-fs (mmcblk0p2): warning: mounting fs with errors, running e2fsck is recommended
    [    8.312301] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
    [   18.654618] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
    [   18.755862] bcm2835_audio soc:audio: card created with 8 channels
    [   19.044242] snd-rpi-cirrus soc:sound: ASoC: CPU DAI (null) not registered - will retry
    [   19.061806] snd-rpi-cirrus soc:sound: ASoC: CODEC DAI wm5102-aif1 not registered - will retry
    [   19.919026] cfg80211: Loading compiled-in X.509 certificates for regulatory database
    [   20.082901] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
    [   20.672894] rtl8188fu: loading out-of-tree module taints kernel.
    [   21.648513]
    [   21.648528] =======================================================
    [   21.648533] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
    [   21.648538] =======================================================
    [   21.648543] Realtek 8188FU USB WiFi driver (Powered by Rockchip) init.
    [   21.648548] RTL871X: module init start
    [   21.648556] RTL871X: rtl8188fu v4.3.23.6_20964.20170110
    [   21.648788] RTL871X:
    [   21.648788] usb_endpoint_descriptor(0):
    [   21.648798] RTL871X: bLength=7
    [   21.648804] RTL871X: bDescriptorType=5
    [   21.648809] RTL871X: bEndpointAddress=81
    [   21.648815] RTL871X: wMaxPacketSize=512
    [   21.648821] RTL871X: bInterval=0
    [   21.648826] RTL871X: RT_usb_endpoint_is_bulk_in = 1
    [   21.648832] RTL871X:
    [   21.648832] usb_endpoint_descriptor(1):
    [   21.648837] RTL871X: bLength=7
    [   21.648842] RTL871X: bDescriptorType=5
    [   21.648847] RTL871X: bEndpointAddress=2
    [   21.648854] RTL871X: wMaxPacketSize=512
    [   21.648859] RTL871X: bInterval=0
    [   21.648864] RTL871X: RT_usb_endpoint_is_bulk_out = 2
    [   21.648870] RTL871X:
    [   21.648870] usb_endpoint_descriptor(2):
    [   21.648875] RTL871X: bLength=7
    [   21.648880] RTL871X: bDescriptorType=5
    [   21.648885] RTL871X: bEndpointAddress=3
    [   21.648890] RTL871X: wMaxPacketSize=512
    [   21.648895] RTL871X: bInterval=0
    [   21.648900] RTL871X: RT_usb_endpoint_is_bulk_out = 3
    [   21.648907] RTL871X: nr_endpoint=3, in_num=1, out_num=2
    [   21.648907]
    [   21.648911] RTL871X: USB_SPEED_HIGH
    [   21.648919] RTL871X: CHIP TYPE: RTL8188FU
    [   21.649334] RTL871X: rtw_hal_config_rftype RF_Type is 3 TotalTxPath is 1
    [   21.649357] RTL871X: Chip Version Info: CHIP_8188F_Normal_Chip_SMIC_B_CUT_1T1R_RomVer(0)
    [   21.649373] RTL871X: _ConfigChipOutEP_8188F OutEpQueueSel(0x05), OutEpNumber(2)
    [   21.682698] RTL871X: EEPROM type is E-FUSE
    [   21.683183] RTL871X: Boot from EFUSE, Autoload OK !
    [   21.714020] RTL871X: hal_EfuseSwitchToBank: Efuse switch bank to 0
    [   22.771310] Starting piCorePlayer v6.0.0-b7 startup.
    [   23.552488] RTL871X: hal_ReadEFuse_WiFi: data end at address=0x6c
    [   23.552683] RTL871X: EEPROM VID = 0x bda
    [   23.552693] RTL871X: EEPROM PID = 0xf179
    [   23.552733] RTL871X: hal_com_config_channel_plan chplan:0x20
    [   23.552746] RTL871X: Hal_EfuseParsePowerSavingMode_8188F...bHWPwrPindetect(0)-bHWPowerdown(0) ,bSupportRemoteWakeup(1)
    [   23.552753] RTL871X: ### PS params=>  power_mgnt(2),usbss_enable(0) ###
    [   23.561965] RTL871X: kfree Pwr Trim flag:0
    [   23.586703] usb 1-1.2: request firmware rtlwifi/rtl8188fufw.bin
    [   23.586897] usb 1-1.2: Direct firmware load for rtlwifi/rtl8188fufw.bin failed with error -2
    [   23.586920] usb 1-1.2: Firmware rtlwifi/rtl8188fufw.bin not available
    [   23.587068] RTL871X:  <=== rtl8188f_FirmwareDownload()
    [   24.085722] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
    [   24.385257] RTL871X: CardDisableRTL8188FU
    [   24.424163] RTL871X: hal_read_mac_hidden_rpt Fail! (60, 840ms), fwdl:1, id:0xfd
    [   24.424180] RTL871X: InitAdapterVariablesByPROM_8188FU(): REPLACEMENT = 0
    [   24.424188] RTL871X: rtw_hal_read_chip_info in 2780 ms
    [   24.424419] RTL871X: init_channel_set((null)) ChannelPlan ID:0x20, ch num:13
    [   24.425031] RTL871X: NR_RECVBUFF: 8
    [   24.425041] RTL871X: MAX_RECVBUF_SZ: 32768
    [   24.425056] RTL871X: NR_PREALLOC_RECV_SKB: 8
    [   24.425331] RTL871X: rtw_alloc_macid((null)) if1, hwaddr:ff:ff:ff:ff:ff:ff macid:1
    [   24.425380] RTL871X: Init_ODM_ComInfo_8188f(): fab_ver=0 cut_ver=1
    [   24.425451] RTL871X: phy_ConfigBBWithPgParaFile(): No File PHY_REG_PG.txt, Load from HWImg Array!
    [   24.425477] RTL871X: default power by rate loaded
    [   24.426253] RTL871X: pwrctrlpriv.bSupportRemoteWakeup~~~~~~
    [   24.426262] RTL871X: pwrctrlpriv.bSupportRemoteWakeup~~~[1]~~~
    [   24.426274] RTL871X: can't get autopm:
    [   24.426292] RTL871X: rtw_macaddr_cfg mac addr:00:e0:26:2e:53:8d
    [   24.426304] RTL871X: bDriverStopped:True, bSurpriseRemoved:False, bup:0, hw_init_completed:0
    [   24.426418] RTL871X: rtw_wiphy_alloc(phy0)
    [   24.426432] RTL871X: rtw_wdev_alloc(padapter=(ptrval))
    [   24.426448] RTL871X: rtw_wiphy_register(phy0)
    [   24.442517] RTL871X: rtw_ndev_init(wlan0) if1 mac_addr=00:e0:26:2e:53:8d
    [   24.444175] RTL871X: cfg80211_rtw_get_txpower
    [   24.444735] snd-rpi-cirrus soc:sound: ASoC: CODEC DAI wm5102-aif1 not registered - will retry
    [   24.458987] usbcore: registered new interface driver rtl8188fu
    [   24.459004] RTL871X: module init ret=0
    [   25.333694] random: crng init done
    [   25.753297] RTL871X: +871x_drv - drv_open, bup=0
    [   25.810562] RTL871X:  power-on :REG_SYS_CLKR 0x09=0xfc. REG_CR 0x100=0x3f.
    [   25.810576] RTL871X:  MAC has already power on.
    [   25.814633] usb 1-1.2: request firmware rtlwifi/rtl8188fufw.bin
    [   25.814823] usb 1-1.2: Direct firmware load for rtlwifi/rtl8188fufw.bin failed with error -2
    [   25.814846] usb 1-1.2: Firmware rtlwifi/rtl8188fufw.bin not available
    [   25.814993] RTL871X:  <=== rtl8188f_FirmwareDownload()
    [   25.815003] RTL871X: fw download ok!
    [   25.891727] RTL871X: PHY_MACConfig8188F OK!
    [   26.117113] RTL871X: PHY_BBConfig8188F OK!
    [   26.534439] RTL871X: PHY_RFConfig8188F OK!
    [   26.613780] RTL871X: usb_AggSettingRxUpdate: RX Aggregation USB mode, size=20KB, timeout=1024us
    [   26.726742] RTL871X: pDM_Odm TxPowerTrackControl = 1
    [   26.726902] RTL871X: pDM_Odm TxPowerTrackControl = 1
    [   27.869722] RTL871X: rtl8188fu_hal_init in 2120ms
    [   27.937678] RTL871X: #### hw_var_set_opmode() -5007 iface_type(0) mode = 2 ####
    [   27.939933] RTL871X: MAC Address = 00:e0:26:2e:53:8d
    [   27.946874] RTL871X: rtw_cfg80211_init_wiphy:rf_type=3
    [   27.946897] RTL871X: [HT] HAL Support STBC = 0x01
    [   27.946947] RTL871X: -871x_drv - drv_open, bup=1
    [   27.947722] RTL871X: cfg80211_rtw_set_power_mgmt(wlan0) enabled:1, timeout:-1
    [   28.492457] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
    [   28.562937] RTL871X: cfg80211_rtw_get_txpower
    [   28.563216] RTL871X: cfg80211_rtw_get_txpower
    [   28.564675] RTL871X: cfg80211_rtw_get_txpower
    [   28.564902] RTL871X: cfg80211_rtw_get_txpower
    [   28.567846] RTL871X: cfg80211_rtw_get_txpower
    [   28.594014] RTL871X: cfg80211_rtw_flush_pmksa(wlan0)
    [   28.594415] RTL871X: _rtw_reg_notifier
    [   28.594436] RTL871X: _rtw_reg_notifier_apply: NL80211_REGDOM_SET_BY_USER to DRV
    [   28.896541] RTL871X: cfg80211_rtw_scan(wlan0)
    [   29.799091] arizona spi0.1: Failed to get mclk1: -2
    [   29.799122] arizona spi0.1: Failed to get mclk2: -2
    It goes on and on..
    Code:
    [  912.168151] RTL871X:  fw read cmd failed...
    [  914.241368] RTL871X:  fw read cmd failed...
    [  914.242436] RTL871X: HwRateToMRate(): Non supported Rate [ff]!!!
    wasn't there a diag / debug log upload feature in PCP ? might be useful to test that too.

    M-H
    Pi based multi-room audio system powered by PiCorePlayer(s):
    Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card, Pi Zero with Phat-beat , and a few other tests...

  2. #32
    Senior Member M-H's Avatar
    Join Date
    Oct 2016
    Location
    Western Europe
    Posts
    199
    btw, an insitu upgrade from 6.0b7 to 6.0b7 does break things :-) , tomorrow , a new day, a new image flash etc.
    Pi based multi-room audio system powered by PiCorePlayer(s):
    Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card, Pi Zero with Phat-beat , and a few other tests...

  3. #33
    Senior Member paul-'s Avatar
    Join Date
    Jan 2013
    Posts
    2,748
    Normally, updates can run twice.....but Iĺve not tested those much lately.

    Your right, this looks like too much. Verbosity in the driver. Iĺll take a look
    piCorePlayer a small player for the Raspberry Pi in RAM.
    Homepage: https://www.picoreplayer.org

    Please donate if you like the piCorePlayer

  4. #34
    Senior Member paul-'s Avatar
    Join Date
    Jan 2013
    Posts
    2,748
    Can you test this package...

    https://dl.dropboxusercontent.com/s/...80-pcpCore.zip

    The logging was all hardcoded, not trapped with a config.....I hated to just delete it so I converted back to a CONFIG_DEBUG type system......hope I got it tagged right.
    piCorePlayer a small player for the Raspberry Pi in RAM.
    Homepage: https://www.picoreplayer.org

    Please donate if you like the piCorePlayer

  5. #35
    Senior Member M-H's Avatar
    Join Date
    Oct 2016
    Location
    Western Europe
    Posts
    199
    Thanks Paul,

    Perhaps a noob question , but how do I correctly add a tzc manually ?
    The .list file does not make sense as a script.

    Regards M-H
    Pi based multi-room audio system powered by PiCorePlayer(s):
    Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card, Pi Zero with Phat-beat , and a few other tests...

  6. #36
    Senior Member paul-'s Avatar
    Join Date
    Jan 2013
    Posts
    2,748
    Just delete the old files, unzip into the optional folder, then reboot.

    The list and info files are just for repo stuff, I just zipped everything

    Or if you are starting with a new image, just follow the instructions I previously posted.
    piCorePlayer a small player for the Raspberry Pi in RAM.
    Homepage: https://www.picoreplayer.org

    Please donate if you like the piCorePlayer

  7. #37
    Senior Member M-H's Avatar
    Join Date
    Oct 2016
    Location
    Western Europe
    Posts
    199

    RTL8188eus wifi dongle

    I have tested the new set to work on 2 of my pi's . ( zero 1.2 , and a B+ ).
    The mesg overflow is gone, and the driver seemingly works.
    pinging the new destination constantly for about 3600 seconds dit not show 1 missed answer.
    also the v6.0.0B7 still installs the cirrus logic drivers without issues, and sound is as if there was no upgrade.
    Tested the same sd in a 2B, and no fun. I assume only armv6 at this stage.
    Please let me know what tests you would like me to do.
    Regards M-H
    Pi based multi-room audio system powered by PiCorePlayer(s):
    Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card, Pi Zero with Phat-beat , and a few other tests...

  8. #38
    Senior Member paul-'s Avatar
    Join Date
    Jan 2013
    Posts
    2,748
    Here is the extension for armv7

    https://dl.dropboxusercontent.com/s/...pcpCore_v7.zip

    I would run some network throughput tests.....iperf3 tests can be ran from Diagnostics|Network. Otherwise it's probably fine if it connects and streams.
    piCorePlayer a small player for the Raspberry Pi in RAM.
    Homepage: https://www.picoreplayer.org

    Please donate if you like the piCorePlayer

  9. #39
    Senior Member
    Join Date
    Feb 2013
    Posts
    114
    Paul, do you want me to perform additional tests?

  10. #40
    Senior Member M-H's Avatar
    Join Date
    Oct 2016
    Location
    Western Europe
    Posts
    199

    RTL8188eus wifi dongle

    I quickly tested this driver on a 2B, . New SD and Image used , No issue found.
    Unfortunately no time or dac available for a quick test.
    Next would be to use this SD and Wifi on a 3B+ and a 4B and add dac hat and speakers.

    Would we need to test a combined set of drivers ( armv6 and armv7 ) ? As it would be difficult to explain users to either install the one or the other based on the pi they use.

    Regards M-H
    Pi based multi-room audio system powered by PiCorePlayer(s):
    Pi3B with Phat-dac in a Rasptouch, 2 pi B+ with Cirrus Logic Audio Card, Pi Zero with Phat-beat , and a few other tests...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •