Home of the Squeezebox™ & Transporter® network music players.
Page 2 of 5 FirstFirst 1234 ... LastLast
Results 11 to 20 of 45
  1. #11
    Quote Originally Posted by mherger View Post
    > I had LMS running on my Ubuntu machine, but I have made the switch to
    > Debian 10 with Mate Desktop, Intel x32 bit processor.


    We don't provide binaries for recent perl versions on x86 CPUs. Recent
    builds only support x86_64. What perl version would you be running?

    If you didn't want to switch distribution, you could build the binaries
    yourself:

    https://github.com/Logitech/slimserv...ublic/7.9/CPAN

    --

    Michael
    Here is my pearl versiom

    This is perl 5, version 28, subversion 1 (v5.28.1) built for i686-linux-gnu-thread-multi-64int

  2. #12
    Quote Originally Posted by castalla View Post
    When you run dpkg you should see lines of information as the install takes place. If the install is successful then there should be no error mesages.
    Paste the output.
    Here is the output

    ~/Desktop$ sudo dpkg -i logitechmediaserver_7.9.1_i386.deb

    (Reading database ... 263687 files and directories currently installed.)
    Preparing to unpack logitechmediaserver_7.9.1_i386.deb ...
    invoke-rc.d: policy-rc.d denied execution of stop.
    Unpacking logitechmediaserver (7.9.1) over (7.9.1) ...
    Setting up logitechmediaserver (7.9.1) ...
    invoke-rc.d: policy-rc.d denied execution of start.
    Processing triggers for systemd (241-7~deb10u2) ...

    ~/Desktop$

  3. #13
    Babelfish's Best Boy mherger's Avatar
    Join Date
    Apr 2005
    Location
    Switzerland
    Posts
    20,366

    Need help installing on Debian 10

    > This is perl 5, version 28, subversion 1 (v5.28.1) built for
    > i686-linux-gnu-thread-multi-64int


    You'll have to build the binaries yourself (or find somebody who already
    did). We do not include them in LMS.

    --

    Michael

  4. #14
    Quote Originally Posted by Rnee View Post
    It's quite simple, I'm not a Linux expert either, used another howto which didn't work but with this one it was easy.
    I started from: http://wiki.slimdevices.com/index.ph...stalling_7.9.2

    You open a command line and all depends a little on whether you have admin rights or not.
    If not, you have to precede those lines which start with sudo exactly that way.
    If you do already have admin (root) rights, you can omit sudo.
    Then just copy/paste each line followed by enter.
    Just pay attention that you don't see any errors after entering.

    That's how it has worked for me.
    At the end, depending if you use the same machine or not, you have to enter the right address of the machine you installed LMS on as pointer in the browser.

    HTH
    Hello,

    I tried this method but seem to have a problem when I run wget.

    See command line output below.

    • Can you advise me on what I should do or what went wrong?



    $ sudo apt-get install libio-socket-ssl-perl
    [sudo] password:
    Reading package lists... Done
    Building dependency tree
    Reading state information... Done
    libio-socket-ssl-perl is already the newest version (2.060-3).
    libio-socket-ssl-perl set to manually installed.
    0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

    $(dpkg --print-architecture)

    $ if [ "$os" = "armhf" ]; then os=arm; fi

    $ url="http://www.mysqueezebox.com/update/?version=7.9.1&revision=1&geturl=1&os=deb"

    $ latest_lms=$(wget -q -O - "$url")
    bash: wget: command not found

    $

  5. #15
    Quote Originally Posted by mherger View Post
    > This is perl 5, version 28, subversion 1 (v5.28.1) built for
    > i686-linux-gnu-thread-multi-64int


    You'll have to build the binaries yourself (or find somebody who already
    did). We do not include them in LMS.

    --

    Michael
    Hi Michael,

    This is a little bit beyond my knowkedge.

    Can you tell me

    • What is a binary?
    • What is the name of the binary that I need?
    • Where would I be able to find the binary?
    • How do I build the binary?



    I am hoping with your help I can install the Logitech Media Server.

    How come I didn't need to build any binaries when putting Logitech Media Server on my old Ubuntu system?

  6. #16
    Quote Originally Posted by Rnee View Post
    I have successfully installed LMS on a Debian server in a container with this howto: http://wiki.slimdevices.com/index.php/DebianPackage
    Hi,

    I ran through these commands, they seemed to work as far as I could tell, but when I visit 102.x.x.x:9000 the logitech media server interface still isn't loading.

    Is there anything I can check to see what the problem is?

  7. #17
    Member
    Join Date
    May 2017
    Location
    Saint-SimÚon, France
    Posts
    35
    Quote Originally Posted by 1uke_ View Post
    Hi,

    I ran through these commands, they seemed to work as far as I could tell, but when I visit 102.x.x.x:9000 the logitech media server interface still isn't loading.

    Is there anything I can check to see what the problem is?
    Are you sure the LMS Servcie is running?

    At the command line, type:

    Code:
    systemctl status logitechmediaserver.service
    If it's not running, type:

    systemctl enable logitechmediaserver.service
    Followed by:

    Code:
    systemctl start logitechmediaserver.service
    You may need to sudo these commands, depending on your user settings.

    Good luck...

  8. #18
    Quote Originally Posted by Yatsushiro View Post
    Are you sure the LMS Servcie is running?

    At the command line, type:

    Code:
    systemctl status logitechmediaserver.service
    If it's not running, type:



    Followed by:

    Code:
    systemctl start logitechmediaserver.service
    You may need to sudo these commands, depending on your user settings.

    Good luck...

    Running $ systemctl status logitechmediaserver.service

    gives me the following output

    $ systemctl status logitechmediaserver.service
    ● logitechmediaserver.service - LSB: Startup script for the Logitech Media Serve
    Loaded: loaded (/etc/init.d/logitechmediaserver; generated)
    Active: active (exited) since Sun 2019-12-15 00:19:39 GMT; 18h ago
    Docs: man:systemd-sysv-generator(8)
    lines 1-4/4 (END)

    I'm not sure what the above output means so I ran

    $ systemctl enable logitechmediaserver.service

    followed by

    $ systemctl start logitechmediaserver.service

    These commands didn't give any outputs and returned me to a blank command line.

    When I visit 192.x.x.x:9000 I still see a message 'unable to connect'

    Any ideas what is going on or what may be causing the problem?

  9. #19
    Member
    Join Date
    Jun 2017
    Location
    Belgium
    Posts
    86
    Quote Originally Posted by 1uke_ View Post
    bash: wget: command not found
    $
    This is where it goes wrong: wget is a program to download from the command line and apparently it's not installed by default on a desktop system.
    Therefor the LMS package has not been downloaded; you can check this by having a look in the 'sources' directory.
    Code:
    mkdir -p /sources
    cd /sources
    wget $latest_lms
    This is where that 'sources' directory is created, changed to it and the package is downloaded into it.

    You can install wget by either the package manager in the GUI (Graphical User Interface) or on the command line by:
    Code:
    (sudo) apt install wget
    Again, preceding with sudo or not depends on how your system was set up.

    Note: there is no use to hide the IP address of your machine since this is a private/LAN address and cannot be reached from the internet. This is a common, locally used IP range so many users have this.
    Last edited by Rnee; 2019-12-15 at 15:12. Reason: added Note
    pCP v5.0.0 on all players
    LMS 7.9.2 on Debian Buster server in a Linux Container
    RPi 3B+ with Hifiberry AMP2 and official 7" touchscreen (Squeezelite + Jivelite), +27k titles on SMB share
    RPi B as dedicated player, connected over wifi with USB dongle
    RPi 2B as dedicated player, connected over powerline
    RPi Zero W as dedicated player
    Squeezer on Android to control

  10. #20
    Quote Originally Posted by Rnee View Post
    This is where it goes wrong: wget is a program to download from the command line and apparently it's not installed by default on a desktop system.
    Therefor the LMS package has not been downloaded; you can check this by having a look in the 'sources' directory.
    Code:
    mkdir -p /sources
    cd /sources
    wget $latest_lms
    This is where that 'sources' directory is created, changed to it and the package is downloaded into it.

    You can install wget by either the package manager in the GUI (Graphical User Interface) or on the command line by:
    Code:
    (sudo) apt install wget
    Again, preceding with sudo or not depends on how your system was set up.

    Note: there is no use to hide the IP address of your machine since this is a private/LAN address and cannot be reached from the internet. This is a common, locally used IP range so many users have this.
    Hello, thanks for the reply,

    I've installed wget successfully.

    I ran through the code again, and still I can't connect to my logitech media server.

    What can I do next or how can I investigate further?

    Thank you for sticking with me and helping me with this

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •