Home of the Squeezebox™ & Transporter® network music players.
Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    Junior Member
    Join Date
    Nov 2016
    Posts
    21

    Allo USBridge Signature Player setup

    I currently use an Allo Digi-One with LMS. In using the same PCP procedure as the Digi-One, I can't seem to get the USBridge with USB output to work with LMS. What am I missing? Any assistance would be appreciated.

  2. #2

  3. #3
    Junior Member
    Join Date
    Nov 2016
    Posts
    21
    Is there any step by step instructions for installation?

  4. #4
    Senior Member paul-'s Avatar
    Join Date
    Jan 2013
    Posts
    2,277
    There is only one step, and it is in the link posted.

    You must be using pCP6.0.0-b5
    piCorePlayer a small player for the Raspberry Pi in RAM.
    Homepage: https://www.picoreplayer.org

    Please donate if you like the piCorePlayer

  5. #5
    Junior Member
    Join Date
    Nov 2016
    Posts
    21
    Quote Originally Posted by paul- View Post
    There is only one step, and it is in the link posted.

    You must be using pCP6.0.0-b5
    Do I use both files or one:

    Updated: Sept 27, 2019 Short and sweet announcement, but for those that have a new PI4 and want to use pCP......Only an image is offered, as we had to increase partition sizes to accommodate the PI4 firmware/kernels. One image still supports all rpi boards.....

    Latest Beta This is the only image supporting 64 bit.

    Latest AudioCore Beta

    pCP 6.0.0-b5

    Kernel 4.19.75
    RPi Firmware 2019/09/24
    Updated ASIX ax88179_178a driver for Allo USBrigeSig support.

  6. #6
    Senior Member paul-'s Avatar
    Join Date
    Jan 2013
    Posts
    2,277
    If you are new to pCP, I would use the regular version. The AudioCore is for tweakers, but I doubt most would here a benefit.
    piCorePlayer a small player for the Raspberry Pi in RAM.
    Homepage: https://www.picoreplayer.org

    Please donate if you like the piCorePlayer

  7. #7
    Junior Member
    Join Date
    Nov 2016
    Posts
    21
    Are you saying no need for Dietpi but only use pCP 6.0.0-b5? My computer does not establish a connection to the USBridge. I have used picoreplayer before and not had any real issues in the setup but with the https://www.allo.com/sparky/usbridge...re-player.html it doesn't seem to work.

  8. #8
    Junior Member
    Join Date
    Nov 2016
    Posts
    21
    Making progress. Setup in PCP but it is not showing up in LMS. It does showup im mysqueezebox.com. Almost there...

  9. #9
    Senior Member paul-'s Avatar
    Join Date
    Jan 2013
    Posts
    2,277
    Correct, the latest pCP beta image has all of the Allo updated drivers. No need to use an Image from Allo.

    Can you connect to the web interface of the pCP device?
    piCorePlayer a small player for the Raspberry Pi in RAM.
    Homepage: https://www.picoreplayer.org

    Please donate if you like the piCorePlayer

  10. #10
    Junior Member
    Join Date
    Nov 2016
    Posts
    21
    LMS does not see USBridge. Questions using USBridge in USB mode within existing LMS structure. Currently have four other player on system but it has been awhile since I last installed.

    I used this procedure for install. https://www.picoreplayer.org/how_to_install_lms.shtml

    What should the Audio output device settings be set to in squeezelite tab?
    Is there any other file needed above the PCP install procedure?

    Thank you for any support you can provide.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •