I don’t know if there is a dedicated thread for KTB.
I have seen it mentioned in some other threads and since there is some time now I am considering buying it I would like to hear some comments about it.
It will be used as a complementary dac.
Are there any compatibility issues with piCore player?
Any comments are welcome!
Thnx!
Michael
Results 1 to 3 of 3
Thread: Khadas Tone Board
-
2019-10-20, 04:36 #1
Khadas Tone Board
Main system: Synology DS115j/RPi4B4GB(LMS)/RPi3B+[LnrPS](S.lite)/M2Tech EvoDAC Two+[LnrPS]/Densen DM20&30/Spendor SP2/3E
Head-Fi: Schiit Vali2/Sennheiser HD600 & HD25Alum/Audeze Sine.
Aditional HW: Allo DigiOne, iFi iDefender, iPurifier, iPower
-
2020-08-08, 09:21 #2
- Join Date
- Dec 2017
- Posts
- 57
Hi, I use my KTB between an Allo Digione spdif on raspberrypi3 running PiCorePlayer 6.10, and amp: no issues at all. Quite happy with it.
Verzonden vanaf mijn iPad met Tapatalk
-
2020-08-10, 07:53 #3
- Join Date
- Feb 2011
- Location
- Cheshire, UK
- Posts
- 5,496
As of about 15 minutes ago I'm using a Khadas Tone Board in the Audiophonics aluminium case via USB with a wired Pi4 and piCorePlayer 6.
The Pi4 is housed in a Lincoln Binns Pro Case - which contains a daughter board that moves all the inpout/outputs to a single face of the Pi.
The two are moving into my Living Room shortly to replace an SB3 so needs a high WAF.
Pictured below (top -> down)
Khadas Tone Board
Pi4 in Lincoln Binns Pro Case
Pi3 in Lincoln Binns Pro Case
Last edited by d6jg; 2020-08-10 at 08:02.
VB2.4 storage QNAP TS419p (NFS)
Living Room Joggler & Pi4/Khadas -> Onkyo TXNR686 -> Celestion F20s
Office Joggler & Pi3 -> Denon RCD N8 -> Celestion F10s
Dining Room SB Boom
Kitchen UE Radio (upgraded to SB Radio)
Bedroom (Bedside) Pi Zero+DAC ->ToppingTP21 ->AKG Headphones
Bedroom (TV) & Bathroom SB Touch ->Denon AVR ->Mordaunt Short M10s + Kef ceiling speakers
Guest Room Joggler > Topping Amp -> Wharfedale Modus Cubes
Everything controlled by iPeng & Material on iOS