Home of the Squeezebox™ & Transporter® network music players.
Page 29 of 52 FirstFirst ... 19272829303139 ... LastLast
Results 281 to 290 of 520
  1. #281
    Junior Member
    Join Date
    Apr 2013
    Posts
    13
    I did use the beta 5b for USBridge.
    Tested the same image on an rpi and it worked. But i noticed that the IP only showed up in the router for 2 seconds and then dissapeared.
    I could login with the ip that was shown.
    There i put in a fixed ip adress and booted the USBridge. Now i can login and see a ip adress/device in the router.

    So is does work!
    But somehow the ip adress did not show in the router (or just very short moment).

  2. #282
    Junior Member cobrasu's Avatar
    Join Date
    Feb 2018
    Location
    Taichung,Taiwan
    Posts
    3

    Boot from USB3.0 SSD or USB3.0 Flash driver

    Could you pros kindly make a project that support boot from USB3.0 SSD or USB3.0 Flash driver and it can resize USB drive partition by PiCoreplayer itself.I find audio quality from USB driver is better than that boot from SD card.Now I select boot from USB2.0 flash drive rather than SD card,and I use third-party partition tools to resize my memory capacitor,I had tried to boot USB3.0 flash drive from my PI3B but fail.
    Best regard to PiCoreplayer Team

  3. #283
    Senior Member
    Join Date
    May 2009
    Posts
    699
    hello
    just ordered pi 4 (4gb). i would like to install on it picoreplayer 6.0.0, can you tell me some guide to do that? someone told me something about 64 bit kernel: what should i do exactly? is it not enought install 6.0.0? thanks
    Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)

  4. #284
    Senior Member paul-'s Avatar
    Join Date
    Jan 2013
    Posts
    2,292
    nervotoso,

    Please read this thread, it's not that long, and everything is covered in here.
    piCorePlayer a small player for the Raspberry Pi in RAM.
    Homepage: https://www.picoreplayer.org

    Please donate if you like the piCorePlayer

  5. #285
    Senior Member paul-'s Avatar
    Join Date
    Jan 2013
    Posts
    2,292
    Quote Originally Posted by cobrasu View Post
    Could you pros kindly make a project that support boot from USB3.0 SSD or USB3.0 Flash driver and it can resize USB drive partition by PiCoreplayer itself.I find audio quality from USB driver is better than that boot from SD card.Now I select boot from USB2.0 flash drive rather than SD card,and I use third-party partition tools to resize my memory capacitor,I had tried to boot USB3.0 flash drive from my PI3B but fail.
    Best regard to PiCoreplayer Team
    Only a pi4 supports USB 3.0 and Raspberry pi does not support booting from USB yet. A pi3 will support USB boot, but it is quite particular as to what kind of devices it supports.

    Booting from USB has absolutely nothing to do with sound quality.
    piCorePlayer a small player for the Raspberry Pi in RAM.
    Homepage: https://www.picoreplayer.org

    Please donate if you like the piCorePlayer

  6. #286
    Senior Member paul-'s Avatar
    Join Date
    Jan 2013
    Posts
    2,292
    I just pushed up Beta 6. See the OP for details.
    piCorePlayer a small player for the Raspberry Pi in RAM.
    Homepage: https://www.picoreplayer.org

    Please donate if you like the piCorePlayer

  7. #287
    Senior Member kidstypike's Avatar
    Join Date
    Feb 2007
    Location
    Brindle
    Posts
    3,256
    Quote Originally Posted by paul- View Post
    I just pushed up Beta 6. See the OP for details.
    In situ update on my Pi4/4GB from B5 (64bit kernel) to B6 went without problem.

    Thanks

    Name:  vb6.jpg
Views: 159
Size:  30.7 KB
    Server - LMS 7.9.2 Pi4B 4GB/pCP 6.0.0-b6 18K library, playlists & LMS cache on SSD (ntfs)
    Study - Pi3B+/pCP 5.0.0/pi screen/HiFiBerry DAC+/jivelite,
    Lounge - Pi2/pCP 5.0.0 > HiFiBerry DIGI+ > AudioEngine DAC1 > AVI DM5
    Dining Room - Squeezebox Boom
    Garage - Pi3B/Pi screen/HiFiBerry DAC+/pCP 5.0.0 > Edifier R980T

    Spares - 2xTouch, 1xSB3, 1xRadio, 6xRPi

  8. #288
    Senior Member chill's Avatar
    Join Date
    Mar 2007
    Posts
    1,331
    Quote Originally Posted by paul- View Post
    For those running a 6.0.0 beta, insitu update to Beta6 is availiable. Although, I would only try from Beta 4 or 5.
    If I wait long enough, is it likely that I'll to be able to do an insitu update from b1, or is it just better to bite the bullet and reinstall now?

  9. #289
    Senior Member chill's Avatar
    Join Date
    Mar 2007
    Posts
    1,331
    Quote Originally Posted by chill View Post
    If I wait long enough, is it likely that I'll to be able to do an insitu update from b1, or is it just better to bite the bullet and reinstall now?
    Sorry - being stupid. My b1 installation on a Pi4 is obviously not running the 64-bit kernel, so to get that I understand that I need to do a fresh install anyway.

  10. #290
    Senior Member paul-'s Avatar
    Join Date
    Jan 2013
    Posts
    2,292
    You can try..... I just didnĺt have anything running B1 to test. Worst that happens is you have to burn a new image.
    piCorePlayer a small player for the Raspberry Pi in RAM.
    Homepage: https://www.picoreplayer.org

    Please donate if you like the piCorePlayer

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •