Home of the Squeezebox™ & Transporter® network music players.
Page 55 of 55 FirstFirst ... 545535455
Results 541 to 547 of 547
  1. #541
    Babelfish's Best Boy mherger's Avatar
    Join Date
    Apr 2005
    Location
    Switzerland
    Posts
    20,316

    BETA: piCorePlayer6.0.0 - PI4 support

    > Okay, the config is good, and the kernel is running would be 32bit.
    > Confirm by running uname -a from command line. I suspect you are
    > looking at the reported arch by lms on the information page. That arch
    > is actually not real for the runtime, but the arch of the compile
    > machine that built Perl......even though it was built 32bit.


    Ok, that's indeed what I did. But that info can be used by LMS to find
    helper applications. Therefore it would be great if you could "fix" this.

    --

    Michael

  2. #542
    Senior Member
    Join Date
    Apr 2008
    Posts
    1,252

    Thanks...

    Done and done. The upgrade worked great. I'll give it a workout in the morning.

    Thanks again!!

    Howard


    Quote Originally Posted by paul- View Post
    No compelling reason to upgrade, except to help me test a few things. i just did 2 b6 to b7 upgrades, so it should be fine.

  3. #543
    Senior Member
    Join Date
    Apr 2008
    Posts
    1,252

    Equalizer question

    RPI4 6.0.0-b7 Does the equalizer work?

    Thanks,

    Howard

  4. #544
    Senior Member paul-'s Avatar
    Join Date
    Jan 2013
    Posts
    2,302
    Quote Originally Posted by mherger View Post
    Ok, that's indeed what I did. But that info can be used by LMS to find
    helper applications. Therefore it would be great if you could "fix" this.

    Update perl5 from the extension page......or just run pcp-update perl5 from a ssh session. I uploaded it last night.
    piCorePlayer a small player for the Raspberry Pi in RAM.
    Homepage: https://www.picoreplayer.org

    Please donate if you like the piCorePlayer

  5. #545
    Babelfish's Best Boy mherger's Avatar
    Join Date
    Apr 2005
    Location
    Switzerland
    Posts
    20,316

    BETA: piCorePlayer6.0.0 - PI4 support

    > Update perl5 from the extension page......or just run pcp-update perl5
    > from a ssh session. I uploaded it last night.


    Yep:

    Platform Architecture: armv8l-linux
    Perl Version: 5.28.2 - arm-linux-gnueabihf-thread-multi-64int

    Thanks!

    --

    Michael

  6. #546
    Member
    Join Date
    Apr 2019
    Location
    Wunstorf, Germany
    Posts
    54
    I updated a few minutes ago from b5 to b7 without any problem!

    Thank you!

  7. #547
    Junior Member
    Join Date
    Nov 2019
    Posts
    1

    Use more squeezelite instances

    Hi Guys,
    I tried to use two 7.1 sound cards with some more squeezelite instances with pcP 6.0.0-b7 on RPI4 but when I want to start a new instance over ssh with the following code nothing happens.
    Code:
    sudo /usr/local/bin/squeezelite -n "piCorePlayer2" -o stereofront1 -a 80:::0: -m ab:cd:ef:12:34:61 -z
    but when I put the same SD Card in a RPI3B+ with the same sound-cards it works fine and I can use several squeezelite instances on the PI.

    does someone else also have this problem and/or have a solution?

    here is my asound.config:

    Code:
    #
    ##   Channel splitting your UA0099 USB sound card to get up to four                              
    ##     independent stereo outputs (...and more )                                                                
    ###
    ##        stereofront        = the FRONT labeled green jack                                                  
    ##        stereosurround    = the SURROUND labeled black jack                                        
    ##        stereocenter    = the CENTER / BASS labeled yellow jack                                    
    ##         stereoback        = the BACK labeled black jack                                                    
    ##        stereoall        = all stereo outputs                                                                            
    ##                                                                                                                                        
    ##        for up to eight mono output channels use:                                                            
    ##                                                                                                                                        
    ##        monofrontl        = the FRONT labeled green jack - tip          
    ##        monofrontr        = the FRONT labeled green jack - ring          
    ##        monosurroundl    = the SUROUND labeled black jack - tip          
    ##        monosurroundr    = the SUROUND labeled black jack - ring        
    ##        monocenterl     = the CENTER / BASS labeled yellow jack    - tip
    ##        monocenterr     = the CENTER / BASS labeled yellow jack    - ring
    ##         monobackl        = the BACK labeled black jack - tip              
    ##         monobackr        = the BACK labeled black jack - ring          
    ###
    
    
    #########################################################################
    ## labels and colors could be different for differnt vendors or        
    ## versions of the device (Logilink, Sewell, Sweex, ...)              
    #########################################################################
    ##              put this file into your /ect/asound.conf                
    #########################################################################
    
    
    # pcm.pcpinput {            #Line Input Streamer
    #        type plug
    #        slave.pcm "hw:1,0"
    #}
    
    
    
    pcm.sndcard1 {        # alias for sound card 1
        type hw            # must be hw in our case
        card 1            # check your correct card number by typing
        device 0        # 'aplay -l' in your terminal
    }                    # the 1st usb card on the Raspi shows as
                        # card 1: Device [USB Sound Device], device 0: USB Audio [USB Audio]
    
    
    ctl.sndcard1 {       
        type hw
        card 1
        device 0
    }
    
    pcm.sndcard2 {       # alias for sound card 2
    
         type hw
         card 2
         device 0
    }
    
    ctl.sndcard2 {
          type hw
          card 2
          device 0
    }
    
    
    pcm.dmixer1 {
        type dmix
        ipc_key 1024            # must be unique number on your system
        ipc_perm 0666            # neccesary for normal user to have access
        slave.pcm "sndcard1"
        slave {
            period_time 0
            period_size 1024
            buffer_size 4096    
            rate 44100            
            channels 8
        }
        bindings {
            0 0
            1 1
            2 2
            3 3
            4 4
            5 5
            6 6
            7 7
            }
    }    
    
    
    pcm.dmixer2 {
        type dmix
        ipc_key 1024            # must be unique number on your system
        ipc_perm 0666            # neccesary for normal user to have access
        slave.pcm "sndcard2"
        slave {
            period_time 0
            period_size 1024
            buffer_size 4096    
            rate 44100            
            channels 8
        }
        bindings {
            0 0
            1 1
            2 2
            3 3
            4 4
            5 5
            6 6
            7 7
            }
    
    }    
    
    pcm.out {
        type plug
        slave.pcm {
            type multi
            slaves {
                a {
                		channels 8
                		pcm "dmixer1"
                }
                b { 
                		channels 8
                		pcm "dmixer2"
                }
            }
            bindings {
                0 { slave a channel 0 }
                1 { slave a channel 1 }
                2 { slave a channel 2 }
                3 { slave a channel 3 }
                4 { slave a channel 4 }
                5 { slave a channel 5 }
                6 { slave a channel 6 }
                7 { slave a channel 7 }
                8 { slave b channel 0 }
                9 { slave b channel 1 }
               10 { slave b channel 2 }
               11 { slave b channel 3 }
      		 12 { slave b channel 4 }
               13 { slave b channel 5 }
               14 { slave b channel 6 }
               15 { slave b channel 7 }
            }
        }
    }
    
    
    pcm.!default {
        type plug
        slave {
            pcm "out"
            channels 16
        }
        ttable.0.0 1
        ttable.1.1 1
        ttable.0.2 1
        ttable.1.3 1
        ttable.0.4 1
        ttable.1.5 1
        ttable.0.6 1
        ttable.1.7 1
        ttable.0.8 1
        ttable.1.9 1
        ttable.0.10 1
        ttable.1.11 1
        ttable.0.12 1
        ttable.1.13 1
        ttable.0.14 1
        ttable.1.15 1
    }
    
    #Soundkarte 1
    
    pcm.stereofront1 {    
        type plug
        slave {
            pcm "out"
            channels 16
        }
        ttable.0.0 1
        ttable.1.1 1
    }
    
    pcm.stereocenter1 {
        type plug
        slave {
            pcm "out"
            channels 16
        }
        ttable.0.2 1
        ttable.1.3 1
    }
    
    pcm.stereoback1 {
        type plug
        slave {
            pcm "out"
            channels 16
        }
        ttable.0.4 1
        ttable.1.5 1
    }
    
    pcm.stereosurround1 {
        type plug
        slave {
            pcm "out"
            channels 16
        }
        ttable.0.6 1
        ttable.1.7 1
    }
    
    
    pcm.stereoall1 {
        type plug
        slave {
            pcm "out"
            channels 16
        }
        ttable.0.0 1    # input left and right to all 4 l+r outputs
        ttable.1.1 1
        ttable.0.2 1
        ttable.1.3 1
        ttable.0.4 1
        ttable.1.5 1
        ttable.0.6 1
        ttable.1.7 1
    }
    pcm.monofrontl1 {
        type route
        slave {
            pcm "out"
            channels 16
        }
        ttable.0.0 1 # in-channel 0, out-channel 0, 100% volume
        ttable.1.0 1 # in-channel 1, out-channel 0, 100% volume
    }
    
    pcm.monofrontr1 {
        type route
        slave {
            pcm "out"
            channels 16
        }
        ttable.0.1 1
        ttable.1.1 1
    }
    
    pcm.monocenterl1 {
        type route
        slave {
            pcm "out"
            channels 16
        }
        ttable.0.2 1
        ttable.1.2 1
    }
    
    pcm.monocenterr1 {
        type route
        slave {
            pcm "out"
            channels 16
        }
        ttable.0.3 1
        ttable.1.3 1
    }
    
    
    pcm.monobackl1 {
        type route
        slave {
            pcm "out"
            channels 16
        }
        ttable.0.4 1
        ttable.1.4 1
    }
    
    pcm.monobackr1 {
        type route
        slave {
            pcm "out"
            channels 16
        }
        ttable.0.5 1
        ttable.1.5 1
    }
    
    pcm.monosurroundl1 {
        type route
        slave {
            pcm "out"
            channels 16
        }
        ttable.0.6 1
        ttable.1.6 1
    }
    
    pcm.monosurroundr1 {
        type route
        slave {
            pcm "out"
            channels 16
        }
        ttable.0.7 1
        ttable.1.7 1
    }
    
    
    # Soundkarte 2
    pcm.stereofront2 {    
        type plug
        slave {
            pcm "out"
            channels 16
        }
        ttable.0.8 1
        ttable.1.9 1
    }
    
    pcm.stereocenter2 {
        type plug
        slave {
            pcm "out"
            channels 16
        }
        ttable.0.10 1
        ttable.1.11 1
    }
    
    pcm.stereoback2 {
        type plug
        slave {
            pcm "out"
            channels 16
        }
        ttable.0.12 1
        ttable.1.13 1
    }
    
    pcm.stereosurround2 {
        type plug
        slave {
            pcm "out"
            channels 16
        }
        ttable.0.14 1
        ttable.1.15 1
    }
    
    
    pcm.stereoall2 {
        type plug
        slave {
            pcm "out"
            channels 16
        }
        ttable.0.8 1    # input left and right to all 4 l+r outputs
        ttable.1.9 1
        ttable.0.10 1
        ttable.1.11 1
        ttable.0.12 1
        ttable.1.13 1
        ttable.0.14 1
        ttable.1.15 1
    }
    pcm.monofrontl2 {
        type route
        slave {
            pcm "out"
            channels 16
        }
        ttable.0.8 1 # in-channel 0, out-channel 0, 100% volume
        ttable.1.8 1 # in-channel 1, out-channel 0, 100% volume
    }
    
    pcm.monofrontr2 {
        type route
        slave {
            pcm "out"
            channels 16
        }
        ttable.0.9 1
        ttable.1.9 1
    }
    
    pcm.monocenterl2 {
        type route
        slave {
            pcm "out"
            channels 16
        }
        ttable.0.10 1
        ttable.1.10 1
    }
    
    pcm.monocenterr2 {
        type route
        slave {
            pcm "out"
            channels 16
        }
        ttable.0.11 1
        ttable.1.11 1
    }
    
    
    pcm.monobackl2 {
        type route
        slave {
            pcm "out"
            channels 16
        }
        ttable.0.12 1
        ttable.1.12 1
    }
    
    pcm.monobackr2 {
        type route
        slave {
            pcm "out"
            channels 16
        }
        ttable.0.13 1
        ttable.1.13 1
    }
    
    pcm.monosurroundl2 {
        type route
        slave {
            pcm "out"
            channels 16
        }
        ttable.0.14 1
        ttable.1.14 1
    }
    
    pcm.monosurroundr2 {
        type route
        slave {
            pcm "out"
            channels 16
        }
        ttable.0.15 1
        ttable.1.15 1
    }

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •