Home of the Squeezebox™ & Transporter® network music players.
Page 5 of 52 FirstFirst ... 3456715 ... LastLast
Results 41 to 50 of 520
  1. #41
    Senior Member chill's Avatar
    Join Date
    Mar 2007
    Posts
    1,225
    Quote Originally Posted by paul- View Post
    There should be more extensions downloaded with Samba.
    Do you know what those other extensions are? Is it worth me trying to download them manually? In the list of extensions in the piCorePlayer repository there are three that start with 'samba'. samba4.tcz and samba4-lib.tcz are apparently already loaded (after doing the samba install from the LMS tab). The third one, samba4-dev.tcz, won't load - it gives the error
    Code:
    Downloading: libarchive-dev.tcz
    Error on libarchive-dev.tcz
    That seems like it might only be necessary if compiling, for instance, but could that be the reason I can't get samba to work?

  2. #42
    Senior Member paul-'s Avatar
    Join Date
    Jan 2013
    Posts
    2,160
    Pete, You might ask in that other thread.... But I think those are the devices that were dropped from the kernel. It was dropped around kernel 4.17.0
    piCorePlayer a small player for the Raspberry Pi in RAM.
    Homepage: https://www.picoreplayer.org

    Please donate if you like the piCorePlayer

  3. #43
    Senior Member Greg Erskine's Avatar
    Join Date
    Sep 2006
    Location
    Sydney, Australia
    Posts
    1,719
    Quote Originally Posted by chill View Post
    Thanks Greg - that did the trick. 'blkid' told me that mmcblk0p1 had a label 'PCP', and mmcblk0p2 had no label. So I used fatlabel to change p1 to PCP_BOOT, and e2label to change p2 to PCP_ROOT. And now the Resize FS tab no longer thinks I have a non-standard SD card.

    I do have another pCP device, with a big SD card that has a third partition to hold a compressed version of my music library. I deliberately left space between the end of the second partition and the start of the third partition, so that I could expand mmcblk0p2 if necessary. I'm assuming that will now fall foul of the 2 partitions rule. It's not a problem - I can expand the second partition manually if necessary.

    Just the Samba issue to tackle now.
    Hi chill,

    Thanks, you have highlighted an issue for all insitu upgraders.

    The pCP5.0.0 resize command actually resizes the last partition!! which is OK if you only have 2 partitions. Bad if you have 3.

    The resize commands have been updated but not in time for pCP5.0.0.

    regards
    Greg

  4. #44
    Senior Member paul-'s Avatar
    Join Date
    Jan 2013
    Posts
    2,160
    Quote Originally Posted by chill View Post
    Do you know what those other extensions are? Is it worth me trying to download them manually? In the list of extensions in the piCorePlayer repository there are three that start with 'samba'. samba4.tcz and samba4-lib.tcz are apparently already loaded (after doing the samba install from the LMS tab). The third one, samba4-dev.tcz, won't load - it gives the error
    Code:
    Downloading: libarchive-dev.tcz
    Error on libarchive-dev.tcz
    That seems like it might only be necessary if compiling, for instance, but could that be the reason I can't get samba to work?
    You have no need for samba4-dev.

    Make sure the following extensions are installed. You can do that on the extension page, and look at what is contained in the drop down list as installed.

    Code:
      ca-certificates.tcz                         1597440,   1.52 MB
      expat2.tcz                                    73728,   0.07 MB
      gamin.tcz                                     16384,   0.02 MB
      gnutls.tcz                                  1339392,   1.28 MB
      jansson.tcz                                   20480,   0.02 MB
      libacl.tcz                                    16384,   0.02 MB
      libattr.tcz                                    8192,   0.01 MB
      libcap.tcz                                    20480,   0.02 MB
      libidn2.tcz                                  110592,   0.11 MB
      libunistring.tcz                             581632,   0.55 MB
      openssl.tcz                                 1282048,   1.22 MB
      samba4-lib.tcz                              7553024,   7.20 MB
      samba4.tcz                                  3936256,   3.75 MB
      unbound.tcz                                  995328,   0.95 MB
    
      Total size (bytes)                         17551360,  16.74 MB
    piCorePlayer a small player for the Raspberry Pi in RAM.
    Homepage: https://www.picoreplayer.org

    Please donate if you like the piCorePlayer

  5. #45
    Senior Member paul-'s Avatar
    Join Date
    Jan 2013
    Posts
    2,160
    Quote Originally Posted by pputzer View Post

    Code:
    Test Complete. Summary Results:
    [ ID] Interval           Transfer     Bitrate         Jitter    Lost/Total Datagrams
    [  5]   0.00-21.21  sec   759 MBytes   300 Mbits/sec  0.000 ms  0/555748 (0%)  sender
    [  5]   0.00-21.00  sec   148 MBytes  59.2 Mbits/sec  0.174 ms  436688/544068 (80%)  receiver
    CPU Utilization: local/receiver 6.0% (0.7%u/5.3%s), remote/sender 0.8% (0.1%u/0.7%s)
    Edit: Doh! I forgot to change the WIFI country code. No wonder there were issues
    Glad you figured it out.....I just did testing and it was spot on (I noticed your note later) This serves as a notice to those using wifi. If manually configuring, we do not force you to set a country code, but you really need to set it correctly.

    Also, it is noted in the OP, but iperf diagnostics is included in the web pages (Diagnostics -> Network), you will need a second device to run the iperf test with, preferably iperf3 running on your LMS server. Here is some example output.

    Code:
    [ WARN ] Squeezelite is running, results might be affected
    [ WARN ] Goto Main menu and stop squeezelite
    [ INFO ] Iperf running in UDP Mode.
    [ INFO ] Iperf running in Receive Mode.
    [ INFO ] Ommiting 1st second of transmission, likely due to server being faster than rpi.
    [ INFO ] Iperf will run for 20 seconds, then output will show.......
    iperf 3.6
    Linux piHifiADC 4.19.40-rt19-pcpAudioCore_v7 #1 SMP Sat May 11 13:21:57 EDT 2019 armv7l
    Control connection MSS 1448
    Setting UDP block size to 1448
    Time: Tue, 11 Jun 2019 00:25:39 GMT
    Connecting to host 192.168.0.141, port 5201
    Reverse mode, remote host 192.168.0.141 is sending
          Cookie: 3czl6ymyso5fn6lp2lrkdhmax3pj7fbgnxin
    [  5] local 192.168.0.35 port 56941 connected to 192.168.0.141 port 5201
    Starting Test: protocol: UDP, 1 streams, 1448 byte blocks, omitting 1 seconds, 21 second test, tos 0
    [ ID] Interval           Transfer     Bitrate         Jitter    Lost/Total Datagrams
    [  5]   0.00-1.00   sec  15.8 MBytes   132 Mbits/sec  0.086 ms  6905/18313 (38%)  (omitted)
    [  5]   0.00-1.00   sec  14.7 MBytes   123 Mbits/sec  0.124 ms  14884/25526 (58%)  
    [  5]   1.00-2.00   sec  14.8 MBytes   124 Mbits/sec  0.112 ms  15622/26352 (59%)  
    [  5]   2.00-3.00   sec  15.7 MBytes   132 Mbits/sec  0.147 ms  15318/26719 (57%)  
    [  5]   3.00-4.00   sec  16.1 MBytes   135 Mbits/sec  0.077 ms  14270/25896 (55%)  
    [  5]   4.00-5.00   sec  16.1 MBytes   135 Mbits/sec  0.125 ms  14260/25901 (55%)  
    [  5]   5.00-6.00   sec  16.1 MBytes   135 Mbits/sec  0.069 ms  13997/25624 (55%)  
    [  5]   6.00-7.00   sec  16.1 MBytes   135 Mbits/sec  0.107 ms  14140/25798 (55%)  
    [  5]   7.00-8.00   sec  16.1 MBytes   135 Mbits/sec  0.087 ms  14360/26017 (55%)  
    [  5]   8.00-9.00   sec  16.1 MBytes   135 Mbits/sec  0.162 ms  14233/25871 (55%)  
    [  5]   9.00-10.00  sec  16.1 MBytes   135 Mbits/sec  0.082 ms  14060/25709 (55%)  
    [  5]  10.00-11.00  sec  16.1 MBytes   135 Mbits/sec  0.196 ms  14528/26179 (55%)  
    [  5]  11.00-12.00  sec  16.1 MBytes   135 Mbits/sec  0.092 ms  14069/25694 (55%)  
    [  5]  12.00-13.00  sec  16.1 MBytes   135 Mbits/sec  0.191 ms  14400/26040 (55%)  
    [  5]  13.00-14.00  sec  16.1 MBytes   135 Mbits/sec  0.103 ms  14147/25810 (55%)  
    [  5]  14.00-15.00  sec  16.1 MBytes   135 Mbits/sec  0.071 ms  14093/25749 (55%)  
    [  5]  15.00-16.00  sec  16.1 MBytes   135 Mbits/sec  0.121 ms  14337/25982 (55%)  
    [  5]  16.00-17.00  sec  16.1 MBytes   135 Mbits/sec  0.116 ms  14265/25894 (55%)  
    [  5]  17.00-18.00  sec  15.8 MBytes   133 Mbits/sec  0.178 ms  14169/25625 (55%)  
    [  5]  18.00-19.00  sec  16.1 MBytes   135 Mbits/sec  0.049 ms  14451/26088 (55%)  
    [  5]  19.00-20.00  sec  16.1 MBytes   135 Mbits/sec  0.102 ms  14735/26361 (56%)  
    [  5]  20.00-21.00  sec  16.0 MBytes   134 Mbits/sec  0.087 ms  14036/25634 (55%)  
    - - - - - - - - - - - - - - - - - - - - - - - - -
    Test Complete. Summary Results:
    [ ID] Interval           Transfer     Bitrate         Jitter    Lost/Total Datagrams
    [  5]   0.00-21.12  sec   755 MBytes   300 Mbits/sec  0.000 ms  0/554589 (0%)  sender
    [  5]   0.00-21.00  sec   334 MBytes   134 Mbits/sec  0.087 ms  302374/544469 (56%)  receiver
    CPU Utilization: local/receiver 12.4% (1.2%u/11.2%s), remote/sender 18.8% (2.2%u/16.6%s)
    
    iperf Done.
    piCorePlayer a small player for the Raspberry Pi in RAM.
    Homepage: https://www.picoreplayer.org

    Please donate if you like the piCorePlayer

  6. #46
    Senior Member chill's Avatar
    Join Date
    Mar 2007
    Posts
    1,225
    Quote Originally Posted by paul- View Post
    You have no need for samba4-dev.

    Make sure the following extensions are installed. You can do that on the extension page, and look at what is contained in the drop down list as installed.

    Code:
      ca-certificates.tcz                         1597440,   1.52 MB
      expat2.tcz                                    73728,   0.07 MB
      gamin.tcz                                     16384,   0.02 MB
      gnutls.tcz                                  1339392,   1.28 MB
      jansson.tcz                                   20480,   0.02 MB
      libacl.tcz                                    16384,   0.02 MB
      libattr.tcz                                    8192,   0.01 MB
      libcap.tcz                                    20480,   0.02 MB
      libidn2.tcz                                  110592,   0.11 MB
      libunistring.tcz                             581632,   0.55 MB
      openssl.tcz                                 1282048,   1.22 MB
      samba4-lib.tcz                              7553024,   7.20 MB
      samba4.tcz                                  3936256,   3.75 MB
      unbound.tcz                                  995328,   0.95 MB
    
      Total size (bytes)                         17551360,  16.74 MB
    I was missing a few of those:
    Code:
      
      jansson.tcz 
      libidn2.tcz 
      libunistring.tcz 
      unbound.tcz
    I installed them manually from the piCorePlayer respository, reinsatalled samba from the LMS page, and rebooted, but samba still won't start.

    I'm not sure it's worth wasting any more of your time on this - I should just start from a fresh pCP5 image.

  7. #47
    Senior Member
    Join Date
    Jan 2011
    Location
    Staffordshire. UK
    Posts
    2,828
    Quote Originally Posted by paul- View Post
    I'll take a look at the LMS update issues. At work right now, will check this evening.
    Thanks Paul.

    All ticketyboo now

    ronnie

  8. #48
    Senior Member ralphy's Avatar
    Join Date
    Jan 2006
    Location
    Canada
    Posts
    2,202
    Quote Originally Posted by psketch View Post
    Hi Paul, I thought that originally, but in that thread ralphy said ...

    The 4.19 linux kernel has removed the original LIRC uinput drivers that piCorePlayer has used since 3.x for navigating Jivelite with an IR remote control.
    The feature is still supported but you need to migrate your lircd.conf files to an IR keytables configuration.

    When I read "still supported", I thought he meant lirc, but I guess it means IR control of jivelite.... If I read it right after that, you can only use keytables with GPIO, so my old USB receiver is defunct with 5.x. Is that right?
    Thanks. I've updated the sentence to clarify.

    We might be able to get the USB receiver to work.

    Post the old working configuration and setup in the IR Keytables Thread as well as any refereneces to the usb device from the dmesg command.
    Ralphy

    1-Touch, 5-Classics, 3-Booms, 1-UE Radio
    Squeezebox client builds donations always appreciated.

  9. #49
    Senior Member paul-'s Avatar
    Join Date
    Jan 2013
    Posts
    2,160
    Quote Originally Posted by Man in a van View Post
    Thanks Paul.

    All ticketyboo now

    ronnie
    Assume that means It's working now. lol. The problem was actually on the mysqueezebox side. Michael had to fix it.
    piCorePlayer a small player for the Raspberry Pi in RAM.
    Homepage: https://www.picoreplayer.org

    Please donate if you like the piCorePlayer

  10. #50
    Member
    Join Date
    Apr 2019
    Location
    Wunstorf, Germany
    Posts
    53
    Hello!

    Is there a possibility to read external disks with HFS+ format?
    I have a Mac and my iTunes library resides on a HFS+ volume. I am copying it to a M.2 SSD (now it has ExFAT format) with an USB enclosure which is attached to the Pi 3B+.
    When I am syncing my iTunes library to this external M.2 SSD the Mac is always synchronising all foldes with umlauts in their name because ExFAT uses another coding than HFS+. So it would be great if there is HFS+ support maybe either ExFAT and NTFS or HFS+.

    Or is HFS+ too big for this?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •