Bonjour,
j'ai un raspberry 3 avec un écran waveshare 5" (picoreplayer 4) et j'ai du mal à faire fonctionner l'écran tactile.
l'image s'affiche correctement au bon format après avoir modifié le config.txt dans le boot.
Est ce que vous pourriez m'indiquer la marche à suivre (anglais ou français) pour se servir de ts_calibrate et ts_test indiqué ici :
MerciTouch off with Jivelite/Waveshare 5" on piCorePlayer
Hello
I am running RPi 3B with Waveshare 5" (B) screen, piCorePlayer 4.
I can calibrate the screen properly with ts_calibrate and touch works correctly with ts_test, but then touch is away from touching point in Jivelite.
I use Grid Skin 800x480 to match the screen, but the issue seems to be similar also with other skins.
Any ideas what can be wrong?
Regards,
david
Results 1 to 2 of 2
Thread: picoreplayer et waveshare 5"
-
2018-10-31, 00:28 #1
- Join Date
- Oct 2018
- Posts
- 9
picoreplayer et waveshare 5"
-
2018-11-09, 01:41 #2
- Join Date
- Oct 2018
- Posts
- 9
Personne a une idée