Trying to get pcp/lms working on corporate network with full support from maintenance guys. The block everything by default.
I saw a post of port 80,443 and 4070 to open up (but to which domain/ip address)
One thing is also the date time. On the network they only support there own ntp server but how to permanently add this one to pcp?
Regards, edwin
Btw PcP and LMS really rocks. So many thanks to the people who take effort to keep this alive!
Results 1 to 3 of 3
-
2018-10-10, 22:05 #1Senior Member
- Join Date
- May 2017
- Posts
- 340
PcP, how to use different ntp server
SqueezeBoxes: 2x SB2 (Living room and study), 1x Radio (Kitchen), 1x Boom (Dining room), 1x piCorePlayer (jacuzzi), 1x piCorePlayer (Garden) 1x OSMC + Squeezelite (Movie room), 1x Touch (Bedroom)
Server: LMS on Pi3 7.9.1. on PcP 3.21
Network: AVM Fritzbox, D-Link Smart Switch 24p, 3x Ubiquity
-
2018-10-11, 01:53 #2Senior Member
- Join Date
- Sep 2006
- Location
- Sydney, Australia
- Posts
- 1,426
hi edwin2006,
[Main Page] in [Beta] mode > [Extras] > [Bootcodes]. Update "ntpser[pver=". Press [Save].
WARNING: Raspberry Pi thingies are not very secure. pCP is not very secure. I would not recommend them in Corporate Environments.
regards
Greg
-
2018-10-11, 04:03 #3Senior Member
- Join Date
- May 2017
- Posts
- 340
Thanks!
SqueezeBoxes: 2x SB2 (Living room and study), 1x Radio (Kitchen), 1x Boom (Dining room), 1x piCorePlayer (jacuzzi), 1x piCorePlayer (Garden) 1x OSMC + Squeezelite (Movie room), 1x Touch (Bedroom)
Server: LMS on Pi3 7.9.1. on PcP 3.21
Network: AVM Fritzbox, D-Link Smart Switch 24p, 3x Ubiquity
Reply With Quote
