Home of the Squeezebox™ & Transporter® network music players.
Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Oct 2009
    Location
    Western New York
    Posts
    61

    IR Codes shared by boom and touch.

    Hi,

    I have a unique situation where a have a standalone boom, and a touch that is connected to a soundbar, in the same general area. I use them independently for different listening situations that are very minor, but it works for me.

    I configured a harmony remote with two separate SB activities ("Listen to Boom" "Listen to Touch") in addition to watch TV, play DVD, Roku, etc. for ease of use by others...

    I found that the boom and the touch seem to respond to the same default IR codes (as defined by the "my harmony" application). So, the "listen to" activity turn on both units, play starts both units, etc. The result is "play touch" plays both touch and boom.

    Curious if there are any codes that are specific to the boom and the touch. Even if it's just a power toggle, I could say, add "toggle touch" (power off) after I initiate "listen to boom".

    Or, if there are any other clever solutions...

    Jim

  2. #2
    Babelfish's Best Boy mherger's Avatar
    Join Date
    Apr 2005
    Location
    Switzerland
    Posts
    20,045

    IR Codes shared by boom and touch.

    > Or, if there are any other clever solutions...

    If you go to Settings/Player/Remote you can enable/disable IR sets for
    your players. By default there's support for a JVC remote, too. You
    could probably use one for Boom, the other for the Touch?

    --

    Michael

  3. #3
    Senior Member
    Join Date
    Jan 2010
    Location
    Hertfordshire
    Posts
    1,755
    Quote Originally Posted by mherger View Post
    > Or, if there are any other clever solutions...

    If you go to Settings/Player/Remote you can enable/disable IR sets for
    your players. By default there's support for a JVC remote, too. You
    could probably use one for Boom, the other for the Touch?

    --

    Michael
    After reading this I looked for Settings/Player/Remote for my players which are Touch and Radios and it does not seem to exist. Is it only for the older players?

    Sent from my SM-G900F using Tapatalk

  4. #4
    Babelfish's Best Boy mherger's Avatar
    Join Date
    Apr 2005
    Location
    Switzerland
    Posts
    20,045

    IR Codes shared by boom and touch.

    > After reading this I looked for Settings/Player/Remote for my players
    > which are Touch and Radios and it does not seem to exist. Is it only for
    > the older players?


    Seems so :-(. Sorry, didn't remember that. But for Boom this might still
    work?

    --

    Michael

  5. #5
    Member
    Join Date
    Oct 2009
    Location
    Western New York
    Posts
    61
    Quote Originally Posted by mherger View Post
    Seems so :-(. Sorry, didn't remember that. But for Boom this might still
    work?

    --

    Michael
    It seems to be present for the boom:

    Name:  boomremote.png
Views: 61
Size:  8.4 KB

    but not for my touch:

    Name:  touch remote.png
Views: 61
Size:  17.2 KB

    Ill give this a try later on this evening. Is there any specific JVC code set designation that might help me "tell" the harmony which JVC?

    Thanks, Jim

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •