Synology 7.9.2 packages

[lopasilver]

Thanks Martin,
I will follow your advice and write down/backup all advanced settings I use for plugins (Custom clock, SDT, TrackStat, Youtube#, WU#...)

Edit : I update it today and everything is OK even if I apply the update on the 7.9.1 LMS already installed long time ago on my NAS.

[marccccc]

Hi Martin,

thanks a lot again for your continous effort on the topic.

Looking at the initial post I did not find my DS214+ listed.
So I cannot install the 7.9.2 on it, right?

I also found this page with the processors of the DS (german):
http://www.synology-wiki.de/index.ph...mein_System%3F

Regards
Jacob

[pinkdot]

...

Looking at the initial post I did not find my DS214+ listed.
So I cannot install the 7.9.2 on it, right?

Hi Jacob,

the Armadaxp ... totally forgot this one. I will add the Armadaxp for sure with the next update. Thanks for the heads-up.
If I find the time to check the latest changes on github, I might build a new version, including Armadaxp this weekend.

Greetings,

Martin

[pinkdot]

Packages are updated and up to date with the latest nightly:

Changelog: 0010
Added ArmadaXP, updated to https://github.com/Logitech/slimserv...a781e3f8ecf0e2


Greetings,

Martin

Note: if you run in to problems with Tidal or Deezer:

• Stop LMS
• ssh into your nas
• Delete cache.db (located here: /volume1/@appstore/SqueezeCenter/Cache)
• reboot your nas
• start LMS again

for reference, see this post: https://forums.slimdevices.com/showt...n-piCoreplayer

[Tapaballou]

Hello Martin,
I know that my platform PowerPC with DS213+ is a bit exotic, but it would be fantastic if you could provide a version of your package for this NAS as you have done in the past. Then I could also
survive the next wave of DSM 6.2 which will come next. I do not think that Synology will provide new beta versions for this platform. Actually I am actually running the last version 7.9.1-166 of Synology.
Thanks for your work until now!

[pinkdot]

Hello Martin,
I know that my platform PowerPC with DS213+ is a bit exotic, but it would be fantastic if you could provide a version of your package for this NAS as you have done in the past. Then I could also
survive the next wave of DSM 6.2 which will come next. I do not think that Synology will provide new beta versions for this platform. Actually I am actually running the last version 7.9.1-166 of Synology.
Thanks for your work until now!

Hi Tapaballou,

I'm running the 6.2 beta and this version is even available for DSx11 series. So, I would not worry about your DS213+. That will still be supported for a couple of years.
Yes, the DS213+ is a bit exotic, but so are monaco and comcerto2k :-)

I added the PPC package to Sourceforge. Enjoy.

Greetings,

Martin

[TheLastMan]

Hi all,
LmsUpdate are updated packages based on the LMS beta packages provided by Synology.
DSM6 packages are available for the following nas:

• x86_64 = DS1511+, DS1512+, DS1513+, DS1515+, DS1812+, DS1813+, DS1815+, DS216+, DS216+II, DS218+, DS2411+, DS2413+, DS2415+, DS3615xs, DS411+II, DS412+, DS415+, DS416play, DS418play, DS712+, DS713+, DS716+, DS716+II, DS718+, DS916+, DS918+
• armadaxp = DS214, DS214+, DS414
• armada370 = DS114, DS115j, DS213j, DS214se, DS216se, DS414slim
• armada375 = DS115, DS215j
• armada38x = DS116, DS216, DS216j, DS218j, DS416j, DS416slim
• armv5 = DS111, DS112, DS112+, DS112j, DS211, DS211+, DS211j, DS212, DS212+, DS212j, DS213, DS213air, DS411, DS411j, DS411slim, DS413j
• armv7 = DS1515, DS215+, DS416, DS715
• armv8 = DS118, DS218, DS218play, DS418j, DS418
• i686 = DS214play, DS415play
• monaco = DS216play
• ppc = DS213+, DS413

DSM6 packages: https://sourceforge.net/projects/lms.../files/DSM6.x/
DSM5 packages: https://sourceforge.net/projects/lms.../files/DSM5.x/
Installation

• In Package Center: go to ->settings -> set trust level to 'all pubishers'.
• Download the correct package from SourceForge
• Install the package manually via Package Center

DSDplayer plug-in for x86_64 nas: https://sourceforge.net/projects/lms...player_x86_64/
For those running LmsRepack: LmsRepack is discontinued, you are advised to remove LmsRepack, reboot your nas and switch to either the Synology beta package or LmsUpdate (if available).

I currently have the Synology LMS Beta installed. If I run this package will it:
1. Update my existing installation and keep all the settings?
2. Over-write my existing installation erasing all the settings?
3. Create a second instance of LMS on the NAS?

Many thanks.

[pinkdot]

I currently have the Synology LMS Beta installed. If I run this package will it:
1. Update my existing installation and keep all the settings?
2. Over-write my existing installation erasing all the settings?
3. Create a second instance of LMS on the NAS?

Many thanks.

1.

Greetings,

Martin

[TheLastMan]

1.

Greetings,

Martin

Brilliant! Thanks for the quick response.

[TheLastMan]

1.

Greetings,

Martin

Just updated the package and all working fine, thanks!

I notice that the Armadaxp file is still on 7.9.1. Will you be updating this to 7.9.2 in due course?

Thanks again.