Home of the Squeezebox™ & Transporter® network music players.
Page 103 of 105 FirstFirst ... 35393101102103104105 LastLast
Results 1,021 to 1,030 of 1049
  1. #1021
    Senior Member
    Join Date
    May 2017
    Location
    Netherlands
    Posts
    775

    For those who dont see perl 5.34 after upgrading QLogitechMediaServer to 2.30.02.

    Logon to you`re QNap nas-system by ssh shell.
    Do [ cd /share/*/.qpkg/LogitechMediaServer ], [ ./QLogitechMediaServer.sh clean ] press y when reqeusted and [ ./QLogitechMediaServer.sh restart ].

    This will clean the LMS installation, but settings will be saved and the latest LMS installed ( depending on how you set UPDATE/NIGHTLY/DEVELOPERS, default NIGHTLY )
    For perl 5.34 in QLMS.conf the line "#PERL=0" must exist, and not a file called .PERL should be in the .qpkg/QLogitechMediaServer directory. [ ls -A ]


    Last edited by digimaster; 2022-05-29 at 02:01.

    maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

    Qnap TS-453a, with LogitechMediaSever 8.0.0 Nightly ( with spotty, youtube, Radio Paradise a.m. )
    Several raspberry with hifiberry amp+ and picoreplayer.
    Love logitechmediaserver for it flexibel way, to play music from different sources.


    Thanks for the DONATIONS

  2. #1022
    Senior Member jasell's Avatar
    Join Date
    May 2008
    Posts
    349
    Quote Originally Posted by digimaster View Post

    For those who dont see perl 5.34 after upgrading QLogitechMediaServer to 2.30.02.

    Logon to you`re QNap nas-system by ssh shell.
    Do [ cd /share/*/.qpkg/LogitechMediaServer ], [ ./QLogitechMediaServer.sh clean ] press y when reqeusted and [ ./QLogitechMediaServer.sh restart ].

    This will clean the LMS installation, but settings will be saved and the latest LMS installed ( depending on how you set UPDATE/NIGHTLY/DEVELOPERS, default NIGHTLY )
    For perl 5.34 in QLMS.conf the line "#PERL=0" must exist, and not a file called .PERL should be in the .qpkg/QLogitechMediaServer directory. [ ls -A ]


    I did as described, same Perl version 5.24.4
    NAS: QNAP TS-459U+ QTS 4.2.6 (4x 2TB, RAID5)
    Services: LMS 8.3.0 by QLMS 2.30.01 QLMS at QNAP club
    Squeezebox: 6x Receiver, 3x Boom, 2x SB3 Classic, 1x Touch
    Controller: Control by Material skin or iPeng, Local music or Spotify by Spotty

  3. #1023
    Senior Member
    Join Date
    May 2017
    Location
    Netherlands
    Posts
    775
    Quote Originally Posted by jasell View Post
    I did as described, same Perl version 5.24.4

    Check you`re QLMS.conf on PERL=, or if there does exist a file .PERL in .qpkg/LogitechMediaServer.
    If exist remove it, or in .QLMS.conf it says #PERL=0.

    Still on perl 5.24 after clean and restart, there could be a error preventing it to uses perl 5.34.
    Perl 5.24 LMS perl modules are from the release LMS itself.

    maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

    Qnap TS-453a, with LogitechMediaSever 8.0.0 Nightly ( with spotty, youtube, Radio Paradise a.m. )
    Several raspberry with hifiberry amp+ and picoreplayer.
    Love logitechmediaserver for it flexibel way, to play music from different sources.


    Thanks for the DONATIONS

  4. #1024
    Senior Member
    Join Date
    Apr 2005
    Location
    USA
    Posts
    638
    Quote Originally Posted by digimaster View Post
    https://www.qnapclub.eu/nl/qpkg/545

    Verstuurd vanaf mijn Nokia 5.3 met Tapatalk
    QLMS 2.30 just appeared in my QNAP Club EU. Updating now.

  5. #1025
    Senior Member
    Join Date
    Apr 2005
    Location
    USA
    Posts
    638
    Quote Originally Posted by earthbased View Post
    QLMS 2.30 just appeared in my QNAP Club EU. Updating now.
    Updated quickly and A OK. Thanks for your fine effort!

  6. #1026
    Senior Member jasell's Avatar
    Join Date
    May 2008
    Posts
    349
    Quote Originally Posted by digimaster View Post
    Check you`re QLMS.conf on PERL=, or if there does exist a file .PERL in .qpkg/LogitechMediaServer.
    If exist remove it, or in .QLMS.conf it says #PERL=0.

    Still on perl 5.24 after clean and restart, there could be a error preventing it to uses perl 5.34.
    Perl 5.24 LMS perl modules are from the release LMS itself.
    As said, I followed the instructions.
    Verified that .QLMS.conf file had #PERL=0 and that I did not had any .PERL file.

    I tried again by first stopping the LMS and then doing the Clean followed by Start operation.
    I also tried to reboot my QNAP.

    But same result, Perl ver 5.24.4
    NAS: QNAP TS-459U+ QTS 4.2.6 (4x 2TB, RAID5)
    Services: LMS 8.3.0 by QLMS 2.30.01 QLMS at QNAP club
    Squeezebox: 6x Receiver, 3x Boom, 2x SB3 Classic, 1x Touch
    Controller: Control by Material skin or iPeng, Local music or Spotify by Spotty

  7. #1027
    Updated on my TS-231P, seems to be working fine.

    Perl Version: 5.34.1 - arm-linux-gnueabihf-thread-multi-64int

  8. #1028
    Senior Member
    Join Date
    Apr 2005
    Location
    USA
    Posts
    638
    Quote Originally Posted by digimaster View Post



    Curious on other users, there information.
    especially because all flavors should run on Perl 5.34.

    So lets see you`re LMS info here?
    Logitech Media Server Version: 8.3.0 - 1653404108 @ Tue 24 May 2022 05:39:07 PM CEST
    Hostname: Qnap-TS-251A
    Server IP Address: 192.168.X.X
    Server HTTP Port Number: 9001
    Operating system: QLMS 2.X (QNAP TurboStation) [Debian 9 stretch] - EN - utf8
    Platform Architecture: x86_64-linux
    Perl Version: 5.34.1 - x86_64-linux-thread-multi
    Audio::Scan: 1.05
    IO::Socket::SSL: 2.070
    Database Version: DBD::SQLite 1.58 (sqlite 3.22.0)

  9. #1029
    Senior Member
    Join Date
    May 2017
    Location
    Netherlands
    Posts
    775
    Quote Originally Posted by jasell View Post
    As said, I followed the instructions.
    Verified that .QLMS.conf file had #PERL=0 and that I did not had any .PERL file.

    I tried again by first stopping the LMS and then doing the Clean followed by Start operation.
    I also tried to reboot my QNAP.

    But same result, Perl ver 5.24.4
    Found why it's not working on x86, i386 systems. Gone release 2.30.03 soon, where it will work.

    Verstuurd vanaf mijn Nokia 5.3 met Tapatalk

    maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

    Qnap TS-453a, with LogitechMediaSever 8.0.0 Nightly ( with spotty, youtube, Radio Paradise a.m. )
    Several raspberry with hifiberry amp+ and picoreplayer.
    Love logitechmediaserver for it flexibel way, to play music from different sources.


    Thanks for the DONATIONS

  10. #1030
    Senior Member jasell's Avatar
    Join Date
    May 2008
    Posts
    349
    Quote Originally Posted by digimaster View Post
    Found why it's not working on x86, i386 systems. Gone release 2.30.03 soon, where it will work.

    Verstuurd vanaf mijn Nokia 5.3 met Tapatalk
    Works fine now.

    Code:
    Server
    
    Version: 8.3.0 - 1653404108 @ Tue 24 May 2022 05:39:07 PM CEST
    Hostname: QNAP2
    Server IP Address: 192.168.6.3
    Operating system: QLMS 2.X (QNAP TurboStation) [Debian 9 stretch] - EN - utf8
    Platform Architecture: i686-linux
    Perl Version: 5.34.1 - i386-linux-thread-multi-64int
    Audio::Scan: 1.05
    IO::Socket::SSL: 2.070
    Database Version: DBD::SQLite 1.58 (sqlite 3.22.0)
    By the way, what advantages can we see from using the latest version of Perl?
    NAS: QNAP TS-459U+ QTS 4.2.6 (4x 2TB, RAID5)
    Services: LMS 8.3.0 by QLMS 2.30.01 QLMS at QNAP club
    Squeezebox: 6x Receiver, 3x Boom, 2x SB3 Classic, 1x Touch
    Controller: Control by Material skin or iPeng, Local music or Spotify by Spotty

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •