QLogitechMediaServer for Qnap with QTS 4.2 or higher and x86_64/I686/X86 support !

[digimaster]

For those who dont see perl 5.34 after upgrading QLogitechMediaServer to 2.30.02.

Logon to you`re QNap nas-system by ssh shell.
Do [ cd /share/*/.qpkg/LogitechMediaServer ], [ ./QLogitechMediaServer.sh clean ] press y when reqeusted and [ ./QLogitechMediaServer.sh restart ].

This will clean the LMS installation, but settings will be saved and the latest LMS installed ( depending on how you set UPDATE/NIGHTLY/DEVELOPERS, default NIGHTLY )
For perl 5.34 in QLMS.conf the line "#PERL=0" must exist, and not a file called .PERL should be in the .qpkg/QLogitechMediaServer directory. [ ls -A ]

[jasell]

For those who dont see perl 5.34 after upgrading QLogitechMediaServer to 2.30.02.

Logon to you`re QNap nas-system by ssh shell.
Do [ cd /share/*/.qpkg/LogitechMediaServer ], [ ./QLogitechMediaServer.sh clean ] press y when reqeusted and [ ./QLogitechMediaServer.sh restart ].

This will clean the LMS installation, but settings will be saved and the latest LMS installed ( depending on how you set UPDATE/NIGHTLY/DEVELOPERS, default NIGHTLY )
For perl 5.34 in QLMS.conf the line "#PERL=0" must exist, and not a file called .PERL should be in the .qpkg/QLogitechMediaServer directory. [ ls -A ]

I did as described, same Perl version 5.24.4

[digimaster]

I did as described, same Perl version 5.24.4

Check you`re QLMS.conf on PERL=, or if there does exist a file .PERL in .qpkg/LogitechMediaServer.
If exist remove it, or in .QLMS.conf it says #PERL=0.

Still on perl 5.24 after clean and restart, there could be a error preventing it to uses perl 5.34.
Perl 5.24 LMS perl modules are from the release LMS itself.

[earthbased]

https://www.qnapclub.eu/nl/qpkg/545

Verstuurd vanaf mijn Nokia 5.3 met Tapatalk

QLMS 2.30 just appeared in my QNAP Club EU. Updating now.

[earthbased]

QLMS 2.30 just appeared in my QNAP Club EU. Updating now.

Updated quickly and A OK. Thanks for your fine effort!

[jasell]

Check you`re QLMS.conf on PERL=, or if there does exist a file .PERL in .qpkg/LogitechMediaServer.
If exist remove it, or in .QLMS.conf it says #PERL=0.

Still on perl 5.24 after clean and restart, there could be a error preventing it to uses perl 5.34.
Perl 5.24 LMS perl modules are from the release LMS itself.

As said, I followed the instructions.
Verified that .QLMS.conf file had #PERL=0 and that I did not had any .PERL file.

I tried again by first stopping the LMS and then doing the Clean followed by Start operation.
I also tried to reboot my QNAP.

But same result, Perl ver 5.24.4

[mnd]

Updated on my TS-231P, seems to be working fine.

Perl Version: 5.34.1 - arm-linux-gnueabihf-thread-multi-64int

[earthbased]

Curious on other users, there information.
especially because all flavors should run on Perl 5.34.

So lets see you`re LMS info here?

Logitech Media Server Version: 8.3.0 - 1653404108 @ Tue 24 May 2022 05:39:07 PM CEST
Hostname: Qnap-TS-251A
Server IP Address: 192.168.X.X
Server HTTP Port Number: 9001
Operating system: QLMS 2.X (QNAP TurboStation) [Debian 9 stretch] - EN - utf8
Platform Architecture: x86_64-linux
Perl Version: 5.34.1 - x86_64-linux-thread-multi
Audio::Scan: 1.05
IO::Socket::SSL: 2.070
Database Version: DBD::SQLite 1.58 (sqlite 3.22.0)

[digimaster]

As said, I followed the instructions.
Verified that .QLMS.conf file had #PERL=0 and that I did not had any .PERL file.

I tried again by first stopping the LMS and then doing the Clean followed by Start operation.
I also tried to reboot my QNAP.

But same result, Perl ver 5.24.4

Found why it's not working on x86, i386 systems. Gone release 2.30.03 soon, where it will work.

Verstuurd vanaf mijn Nokia 5.3 met Tapatalk

[jasell]

Found why it's not working on x86, i386 systems. Gone release 2.30.03 soon, where it will work.

Verstuurd vanaf mijn Nokia 5.3 met Tapatalk

Works fine now.

Server

Version: 8.3.0 - 1653404108 @ Tue 24 May 2022 05:39:07 PM CEST
Hostname: QNAP2
Server IP Address: 192.168.6.3
Operating system: QLMS 2.X (QNAP TurboStation) [Debian 9 stretch] - EN - utf8
Platform Architecture: i686-linux
Perl Version: 5.34.1 - i386-linux-thread-multi-64int
Audio::Scan: 1.05
IO::Socket::SSL: 2.070
Database Version: DBD::SQLite 1.58 (sqlite 3.22.0)

By the way, what advantages can we see from using the latest version of Perl?