piCorePlayer IR support

[Jeff07971]

OK, I do not have the screen, but the remote should work.

I thank you for trying so much on my behalf. I am using the HiFiBerry Amp, I have checked the pinouts, no conflict.

I will just have to do without for now.

Regards to all who helped.

Are you using a TV or a monitor then ? If not how are you seeing Jivelite ?

Jeff

[PaulH]

Is there any command to do:

NEXT FAVORITE and PREV FAVORITE ?

Thanks

[Jeff07971]

All Jivelite commands are here

https://github.com/ralph-irving/tcz-...r/jivekeys.csv


Jeff

[PaulH]

All Jivelite commands are here

https://github.com/ralph-irving/tcz-...r/jivekeys.csv


Jeff

Found only next track but it's not working on favorites.

Is there no possibility to change the radio station by remote ?

[wondroushippo]

It seems like based on my searching that nobody has tried it, but figure I'd ask here: has anyone configured the Argon One IR remote in the Argon One case to work with pCP? I've found instructions on how to install the scripts (can't link due to being a newbie), and link to the info for the IR receiver but actually getting the remote working in pCP seems to be another step entirely where I'm getting lost.

[Jeff07971]

It seems like based on my searching that nobody has tried it, but figure I'd ask here: has anyone configured the Argon One IR remote in the Argon One case to work with pCP? I've found instructions on how to install the scripts (can't link due to being a newbie), and link to the info for the IR receiver but actually getting the remote working in pCP seems to be another step entirely where I'm getting lost.

Dosent look so hard, The TSOP IR Receiver when installed will be connected to GPIO23 According to this article https://forums.raspberrypi.com/viewtopic.php?t=286230

You do not need any scripts just set the correct GPIO in the WEB GUI

To control Jivelite you need to create and upload a linux-kernel-IR-remote-keytable

https://forums.slimdevices.com/showt...l=1#post942525

https://github.com/ralph-irving/tcz-...r/jivekeys.csv

Jeff

[Paul Webster]

Is there no possibility to change the radio station by remote ?

Interactively, it is very easy ... but then you can see what it is doing.

However, there are CLI commands to tell LMS to play a favourite.

from the docs

Request: "6e:ef:54:e9:02:b0 favorites playlist play item_id:1.1<LF>"
Response: "6e:ef:54:e9:02:b0 favorites playlist play item_id:1.1<LF>"

[PaulH]

Interactively, it is very easy ... but then you can see what it is doing.

However, there are CLI commands to tell LMS to play a favourite.

from the docs

Request: "6e:ef:54:e9:02:b0 favorites playlist play item_id:1.1<LF>"
Response: "6e:ef:54:e9:02:b0 favorites playlist play item_id:1.1<LF>"

I would like to change favorite from IR remote.
Where shoud I add your commands? On the jivelite keytables ?
Thanks

[Paul Webster]

Do you have number keys on your remote?
If yes ... try "1" for the first favourite ... "2" for the second.
I might have misremembered ... and they might be the "presets" but you can check by setting presets as well

[PaulH]

Do you have number keys on your remote?
If yes ... try "1" for the first favourite ... "2" for the second.
I might have misremembered ... and they might be the "presets" but you can check by setting presets as well

At the moment the remote I'm using don't have any number key. But this remote is working and I'll try before to change it.
UP for 1st favorite, DOWN for the second.
Here is my actual table:

#table: Apple, type: nec
0x87eee20b  KEY_UP
0x87eee20d  KEY_DOWN
0x87eee208  KEY_LEFT
0x87eee207  KEY_L
0x87eee25e  KEY_p
0x87eee25d  KEY_l
0x87eee202  KEY_0