Announce: UPnPBridge = integrate UPnP/DLNA players with LMS (squeeze2upnp)

**PasTim** · 2019-08-27, 01:23

Originally Posted by philippe_44

I don't know, but I suspect they don't.

On your conversation with Ron F. about CC and AirPlay, CC uses mDNS for discover, so a multicast on port 5353 (from memory) and then a dynamic webserver on port starting 49152 as well. AirPlay is a different anymal, it uses mDNS as well for discovery but then it opens 3 UDP ports for the player to use (data, timing, control) upon streaming start which are random at this point

Yes, thanks. I had already got the 5353 port, and the 4915n port (configured in the settings page). As you say, airplay seems to use unpredictable high-numbered ports - not the best piece of IT design.

**Ron F.** · 2019-08-28, 10:48

Originally Posted by philippe_44

Thanks

I'm also trying to "recruit" people interested by my new project, that we do with @sle118.

Tell me if you are interested at some point https://github.com/philippe44/SqueezeAMP

Hi Philippe,

I am looking at your two projects on Github: SqueezeAMP and Squeezelite-esp32.

I have a writeup now for how to configure the Linux iptables firewall for use with UPnPBridge. I will PM it to you and to PasTim for review, and you can post it if you think it is useful.

Edit: I forgot to add, please make any changes you feel are appropriate!

**PiPat** · 2019-09-08, 11:12

Originally Posted by Eliboom

Hello,

Here the settings for my Kef LSX speakers. It works like a charm.

Unfortunately i cannot power off the speakers with the controler app und have to use the Kef remote or remote app.
LMS server 7.9.1 on Asustor AS604T, squeeze2upnp-x86-static, Squeeze Ctrl.

</device>

Hi Eliboom, did you solve the issue with power off the speakers with the KEF remote control? I wasn't able to figure it out.

**kimon** · 2019-09-10, 01:38

Hello,

My Music server is a Nuc, OS is audio-linux (basically tuned arch linux for newbies).
RoonServer is installed, and is working with airplay, roon bridges.
I try to send (and play) music with an upnp renderer mounted in my dac.

What has been done:
Squeeze2upnp compiled.
Then:

Code:

yaourt -U squeeze2upnp-1.20.2-1-x86_64.pkg.tar.xz
touch /home/audiolinux/.config/squeeze2upnp.xml
./squeeze2upnp-x86-64-static -Z -i  /home/audiolinux/.config/squeeze2upnp.xml

After that, i edited file with roonmode=1. I have now this config file:

then

Code:

./squeeze2upnp-x86-64-static -Z -x  /home/audiolinux/.config/squeeze2upnp.xml

gives:

my renderer appears in Roon, but no music plays, timeline isnt incrementing.

I think i'm close, perhaps there's something obvious i don't see.
Any helping hand will be welcome !

**Eliboom** · 2019-09-10, 09:46

Originally Posted by PiPat

Hi Eliboom, did you solve the issue with power off the speakers with the KEF remote control? I wasn't able to figure it out.

Hello PiPat,

I still haven't figured it out. Sorry.

**philippe_44** · 2019-09-12, 22:02

Originally Posted by kimon

Hello,

My Music server is a Nuc, OS is audio-linux (basically tuned arch linux for newbies).
RoonServer is installed, and is working with airplay, roon bridges.
I try to send (and play) music with an upnp renderer mounted in my dac.

What has been done:
Squeeze2upnp compiled.
Then:

Code:

yaourt -U squeeze2upnp-1.20.2-1-x86_64.pkg.tar.xz
touch /home/audiolinux/.config/squeeze2upnp.xml
./squeeze2upnp-x86-64-static -Z -i  /home/audiolinux/.config/squeeze2upnp.xml

After that, i edited file with roonmode=1. I have now this config file:

then

Code:

./squeeze2upnp-x86-64-static -Z -x  /home/audiolinux/.config/squeeze2upnp.xml

gives:

my renderer appears in Roon, but no music plays, timeline isnt incrementing.

I think i'm close, perhaps there's something obvious i don't see.
Any helping hand will be welcome !

It probably does not like the flac file sent by Roon. I can't remember exactly, but there might be a problem with that. Use the transcode mode of squeeze2upnp then

**stuarty** · 2019-09-13, 05:41

Originally Posted by froggy999

the very good news is that the Kiko is well recognized by LMS. Moreover, it works just fine ! :-))
cheers,
Froggy

@ Froggy,

Hurrah! Thanks for persevering with this & thanks to Philippe for providing the Bridge. I finally have my Linn Majik DSM working with LMS (after a long time trying various solutions). Now I can control playback with iPeng and might never need to look at Kazoo again. I copied Froggy's settings for my DSM and they work for me.

I'm posting just to let other people know that the UPnPBridge does work with a Linn Streamer. I looked a lot of posts and tried various settings and until today I could not make any of them work.

**mftech** · 2019-09-19, 13:52

FYI
The Hegel 590 could be controlled as a DNLA transport.
https://www.hegel.com/products/integrated/h590

**schoeppi** · 2019-09-20, 05:01

On Thu, September 19, 2019 10:52 pm, mftech wrote:
>
> FYI
> The Hegel 590 could be controlled as DNLA transport.

Also the Limetree BRIDGE from Lindemann is working fine with the UPNP bridge:

https://lindemann-audio.de/products/...ridge/?lang=en

Ciao,

Schoepp

**kimon** · 2019-09-21, 09:28

Hello, thanks for your help, i have today a nuc with roon rock installed and another one for squeeze2upnp. Os is still audiolinux.
All seems to work. Sound is very good.
I only edited the config file this way:

Code:

<stream_length>1000000000</stream_length>
<roon_mode>1</roon_mode>

Perhaps it will help someone trying to use Audiomat Maestro 3 with squeeze2upnp.

Gapless is ok.
But dsd isn't natively read, had to convert it in roon. (0.2% of my collection)
Thanks a lot for your work on this plugin.

Thread: Announce: UPnPBridge = integrate UPnP/DLNA players with LMS (squeeze2upnp)

Thread Tools

Search Thread

Display

no sound via Roon

Hegel 590

Announce: UPnPBridge = integrateUPnP/DLNA players with LMS (squeeze2upnp)

solved

Posting Permissions