Home of the Squeezebox™ & Transporter® network music players.
Page 153 of 153 FirstFirst ... 53103143151152153
Results 1,521 to 1,524 of 1524
  1. #1521

    writing the custom of ir commands.

    Right now, I have a Justboom IR remote. I'm had been looking at adding a IR remote.
    Is it hard and how would i go by writing Lirc to the Ir remote to custom to the player. Name:  image_2021-11-05_024001.png
Views: 402
Size:  59.0 KB

  2. #1522
    Junior Member
    Join Date
    Oct 2018
    Posts
    11
    Quote Originally Posted by paul- View Post
    Keeping up with the HDMI stuff is getting harder and harder.

    I just tested this on a RPI2B+ rev 1.2

    Add to config.txt

    dtoverlay=vc4-kms-v3d

    You may also need to comment out the line that says
    gpu_mem=16


    Note this will also show a new soundcard on your system (vc4-hdmi) You can disable this sound card by using this line instead.
    dtoverlay=vc4-kms-v3d,noaudio
    Hi,
    I can't sort it out to have Jivelite on my 7" DSI Screen instead of TV through HDMI or on both. I have RPI 3B

    I've modified config file and it lloks like this:

    Code:
    #pCP will retain these settings during insitu-update
    #---Begin-Custom-(Do not alter Begin or End Tags)-----
    dtoverlay=vc4-kms-v3d
    max_framebuffers=2
    display_default_lcd=1
    framebuffer_priority=0
    #---End-Custom----------------------------------------
    hdmi_drive=2
    hdmi_force_hotplug=1
    hdmi_force_edid_audio=1
    I've also commented gpu_mem
    Code:
    #gpu_mem=16
    Then, I've set up Audio Output device to HDMI audio and then i've set Output setting to iec958:CARD=vc4hdmi,DEV=0.

    With these settings I still can't see Jivelite on my DSI screen but instead it goes to TV screen.
    What else should I do to force Jivelite to be shown on DSI screen?

  3. #1523
    Senior Member paul-'s Avatar
    Join Date
    Jan 2013
    Posts
    4,587
    Is it a raspberry pi lcd? Did you try to set the default to 1. See. https://www.raspberrypi.com/document...#video-options

    Otherwise you need to see which frame buffer is being assigned to the display, and the set jivelite to use it.

    /dev/fb0. Or /dev/fb1
    piCorePlayer a small player for the Raspberry Pi in RAM.
    Homepage: https://www.picoreplayer.org

    Please donate if you like the piCorePlayer

  4. #1524
    Junior Member
    Join Date
    Oct 2018
    Posts
    11
    Quote Originally Posted by paul- View Post
    Is it a raspberry pi lcd? Did you try to set the default to 1. See. https://www.raspberrypi.com/document...#video-options
    I have all set, see my config above.

    Otherwise you need to see which frame buffer is being assigned to the display, and the set jivelite to use it.

    /dev/fb0. Or /dev/fb1
    I see only fb0.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •