Jazzman's System

[alexius79]

Wow, i like your system using the DCX2496 and DEQ. I am using only DCX for room correction, eq. Simple setup using JBL305.

Sent from my LGM-V300K using Tapatalk

[jazzman53]

I see you are using Beringher gear.
Have you looked at the DriveRack products by DBX? http://dbxpro.com/en-US/product_families/driverack
Beringher is ok-ich on the electronics part but it is *not so good* machanically (quality of switches, etc.).
The PA2 for example can replace the two Beringher devices.

I should visit the forum more often... yes, I have read about the DriveRack gear. No doubt it's better made than what I'm using. I especially like the DriveRack user interface. However, the Behringers are working OK and I really can't afford to replace them right now.

[Pascal Hibon]

It's time to update this thread since upgrading my DIY speakers with new wire-stator ESL panels:

[ATTACH]22060[/ATTACH][ATTACH]22061[/ATTACH]

I see you are using Beringher gear.
Have you looked at the DriveRack products by DBX? http://dbxpro.com/en-US/product_families/driverack
Beringher is ok-ich on the electronics part but it is *not so good* machanically (quality of switches, etc.).
The PA2 for example can replace the two Beringher devices.

[jazzman53]

My latest setup

It's time to update this thread since upgrading my DIY speakers with new wire-stator ESL panels:

[cubdog]

Nice system. I'd love to hear your speakers.

cubdog

[bazzman]

Nice one Jazzman a quick tidy up of the cables from the TV and it will be spot on.

[jazzman53]

Nice, did you tune/modify the Behringer DCX2496 Crossover in any way?

Christian

I know that many people mod the DCX for various reasons which I'm not real clear on. I'm pretty much a dummy with electronics and I wouldn't know how to mod the Beghringer even if I wanted to. Fortunately the stock un-modded DCX sounds fine to me as-is. I would love to hear a modded one for comparison.

[Schindler]

Nice, did you tune/modify the Behringer DCX2496 Crossover in any way?

Christian

[jazzman53]

you have a nice rack.

Thanks.

It's one-of-a-kind in the Arts & Crafts style. It has side slats, an adjustable shelf and a drawer on top.

I have a DeltaCad drawing available on request.

[netchord]

you have a nice rack.

[jazzman53]

Components:
Logitech Squeezebox Touch
Behringer DEQ2496 RTA/EQ
Behringer DCX2496 Crossover
Carver C1 Preamp
Carver TX-11a Tuner
Carver DTL-100 CDP
Carver SDA-450 CDP
Carver TFM-25 Amps (4)
Carver TFM-42 Amp
DIY Hybrid Electrostat Speakers
DIY Ripole Subs (2)
DIY Sealed Box Sub
DIY Red Oak Rack