Announcement

Collapse
No announcement yet.

Need Power Adapter for Receiver, can't find one anywhere....

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #46
    Logitech Order Cancelled

    I have two receivers. The power adapter died on one of them after a power failure (I was able to verify by swapping the adapters between my two receivers).

    Ordered one on the Logitech website at the link https://support.logi.com/hc/en-us/ar...zebox-Receiver

    But, alas, after about a week, they cancelled my order stating the item was no longer available. But they haven't taken that page down.

    So, I'll try the other suggestions. The Belker one looks promising.

    Jon T.

    Comment


      #47
      Your dead PS should have the voltage printed on it if you want to verify. The receiver takes 9V. Mine isn't the brand I linked, but I just set it to 9V, picked the adapter that fit the receiver and my receiver has been happy ever since.
      Main system - Rock Solid with LMS 8.3.1 on WHS 2011 - 2 Duets ( both WiFi, farthest unit gets 60% signal strength and always works since new power supply) and Squeeseslave
      Cabin system - Rock solid with LMS 8.3.1 on Win10 Pro - 1 RPi 3 Model B (WiFi) /Hifiberry DAC+ Pro/PiCorePlayer and Squeezeslave
      Squeezebox Boom - "At Large" player around both home and cabin
      Headphones and car - Android phone/Bluetooth w/full library on MicroSD card - PowerAmp music player app (similar to Material Skin)

      Comment


        #48
        Cut the plug and a length of lead off the old PSU so you can splice/solder onto the new one. Plenty of 9v psu around but finding the right (non standard) plug is nigh-on impossible. Any that you find will be close but loose fitting.


        Sent from my iPhone using Tapatalk
        3 of every player ever sold back to SLIMP3 (missed Booms)

        Comment


          #49
          Originally posted by yeomanspc View Post
          Cut the plug and a length of lead off the old PSU so you can splice/solder onto the new one. Plenty of 9v psu around but finding the right (non standard) plug is nigh-on impossible. Any that you find will be close but loose fitting.
          I must have been lucky! One of the several plugs that came with my adjustable power supply fit my receiver perfectly. No need to cut the connector off the original PS.

          If the PS ever fails on one of my controller cradles I will cut that line and make it a A type USB connection and use a standard 5V wall wart.
          Last edited by w3wilkes; 2022-12-22, 20:46.
          Main system - Rock Solid with LMS 8.3.1 on WHS 2011 - 2 Duets ( both WiFi, farthest unit gets 60% signal strength and always works since new power supply) and Squeeseslave
          Cabin system - Rock solid with LMS 8.3.1 on Win10 Pro - 1 RPi 3 Model B (WiFi) /Hifiberry DAC+ Pro/PiCorePlayer and Squeezeslave
          Squeezebox Boom - "At Large" player around both home and cabin
          Headphones and car - Android phone/Bluetooth w/full library on MicroSD card - PowerAmp music player app (similar to Material Skin)

          Comment


            #50
            I bought the one that w3w recommended (cheap) and agree, one of the plugs worked out of the box. And you get a whole lot of other plugs you may (or may not) need some day!

            Either way, power supply for the receiver or charging cradle, make sure to note polarity. SB's are center positive, but there are power supplies out there (telecom? Musician? can't remember) that are center negative. If the old one is working, but not well enough, test polarity before, say cutting the cradle cable.
            Jim

            Comment


              #51
              I bought the one that w3w recommended (cheap) and agree, one of the plugs worked out of the box. And you get a whole lot of other plugs you may (or may not) need some day!

              Either way, power supply for the receiver or charging cradle, make sure to note polarity. SB's are center positive, but there are power supplies out there (telecom? Musician? can't remember) that are center negative. If the old one is working, but not well enough, test polarity before, say cutting the cradle cable.
              Jim

              Comment

              Working...
              X