Announce: piCorePlayer 3.00

[Linvincible]

IR finally! Glad this coul dbe squeezed in,
thanks guys this is going to be really helpful!

Finally, a new piCorePlayer version is ready. piCorePlayer3.00.

[paul-]

Where do you have your LMS cache set to be saved? What is the partition type?

[herve]

Where do you have your LMS cache set to be saved? What is the partition type?

Local SDCard - /mnt/mmcblk0p2/tce/slimserver - There is a Cache folder found on this drive

///////////////////////////////////////////////

Disk /dev/mmcblk0: 31.6 GB, 31657558016 bytes
4 heads, 16 sectors/track, 966112 cylinders
Units = cylinders of 64 * 512 = 32768 bytes

Device Boot Start End Blocks Id System
/dev/mmcblk0p1 33 832 25600 c Win95 FAT32 (LBA)
/dev/mmcblk0p2 833 966112 30888960 83 Linux

Disk /dev/sda: 124.2 GB, 124218507264 bytes
255 heads, 63 sectors/track, 15102 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sda1 1 15103 121307135 b Win95 FAT32

///////////////////////////////////

Does it help ? thk

[Wigster]

Those of you with HifiBerry problems - would you try to change your /mnt/mmcblk0p1/config.txt so that analog audio is changed to off.
So please try to change the line so it is: dtparam=audio=off

Then reboot and see if your Hifiberry DAC is working.
Steen

This doesn't work for me. I have checked that my alteration has survived the reboot.

[ctbarker32]

I think that this is WiFi related. i.e. insitu over wifi.

I did my update (2.04 to 3.0) with hardwired ethernet and have problems so I don't know about Wi-Fi being the issue?

[alnames]

Equalizer problem with 3.00

Squeezelite fails to run using the equalizer in 3.00 after the upgrade. If I remove it and enter sysdefault:CARD=ALSA for the output is starts working again. If I attempt to install the equalizer again, squeezelite still won't run.

[paul-]

Device Boot Start End Blocks Id System
/dev/sda1 1 15103 121307135 b Win95 FAT32

Does it help ? thk

FAT32 does not work with cache and installation of plugins. Format that drive to either NFTS or ext4

[AngloCuencano]

Those of you with HifiBerry problems - would you try to change your /mnt/mmcblk0p1/config.txt so that analog audio is changed to off.
So please try to change the line so it is: dtparam=audio=off

Then reboot and see if your Hifiberry DAC is working.
Steen

This does not work for me using the Hifiberry Digi.

[Jeff07971]

This does not work for me using the Hifiberry Digi.

Same here with DAC+ Pro

[scontin]

I didn't see any setting of wake on Lan (WOL) of LMS server to tweaks page.

Where is it?

[Man in a van]

Same here with DAC+ Pro

I don't suppose this is of much use but this afternoon I did a fresh install on a card for a pi using the audiophonics dac which uses the

I2S audio:generic

output settings.

everything seems to work fine.

would this be worth a try?

Ronnie

[herve]

FAT32 does not work with cache and installation of plugins. Format that drive to either NFTS or ext4

Thanks paul- you're right

Something i dont understand, why the cache is written on the usb/mount (my music - usb stick) although the cache has been declared on the the SD card ?

[roef33]

I don't suppose this is of much use but this afternoon I did a fresh install on a card for a pi using the audiophonics dac which uses the



output settings.

everything seems to work fine.

would this be worth a try?

Ronnie

Doesn't work, it says squeezelite is running but there is no sound out of my DAC+
Also tried the dtparam=audio=off not working.
Tested on Pi b+ with pifi DAC+ (Same as hifiberry DAC+)

[frank_richt]

Those of you with HifiBerry problems - would you try to change your /mnt/mmcblk0p1/config.txt so that analog audio is changed to off.
So please try to change the line so it is: dtparam=audio=off

Then reboot and see if your Hifiberry DAC is working.

This did not worked... on an fresh 3.0 installation (Raspberry Pi B with HifiBerry DAC+ selected in beta mode)

Frank

[Jeff07971]

I don't suppose this is of much use but this afternoon I did a fresh install on a card for a pi using the audiophonics dac which uses the



output settings.

everything seems to work fine.

would this be worth a try?

Ronnie

Hi Ronnie,

Thanks for that but no, squeezelite runs but no output

Jeff