If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
What did you use to edit? Was it a WYSISYG editor that a dummy like me could use? Could you possibly share your PC version?
I would really like use this on a 4.3" screen HTPC running Squeezeslave.
Thanks for any help.
I used Wordpad - not WYSISYG !
If you send me a PM with your email address I can send you my version...
You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal...
Touch(wired/W7)+Teddy Pardo PSU - Audiolense 3.3/2.0+INGUZ DRC - MF M1 DAC - Linn 5103 - full Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Pekin Tuner, Townsend Supertweeters,VdH Toslink,Kimber 8TC Speaker & Chord Signature Plus Interconnect cables
Stax4070+SRM7/II phones
Kitchen Boom, Outdoors: SB Radio, Harmony One remote for everything.
I tried this out last night and it works great on both windows and linux. The only problem I had was getting it to work with internet explorer! I use firefox so my IE was quite old and it didn't like this, it wouldn't display anything.
Now for the big question, has anybody tried this on a web enabled photo frame? There are several 800x600 frames that can access a web page, it seems like they would be an ideal now playing display.
I tried this out last night and it works great on both windows and linux. The only problem I had was getting it to work with internet explorer! I use firefox so my IE was quite old and it didn't like this, it wouldn't display anything.
Now for the big question, has anybody tried this on a web enabled photo frame? There are several 800x600 frames that can access a web page, it seems like they would be an ideal now playing display.
Thanks,
John S.
It does display differently in IE and Chrome...
You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal...
Touch(wired/W7)+Teddy Pardo PSU - Audiolense 3.3/2.0+INGUZ DRC - MF M1 DAC - Linn 5103 - full Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Pekin Tuner, Townsend Supertweeters,VdH Toslink,Kimber 8TC Speaker & Chord Signature Plus Interconnect cables
Stax4070+SRM7/II phones
Kitchen Boom, Outdoors: SB Radio, Harmony One remote for everything.
I tried this out last night and it works great on both windows and linux. The only problem I had was getting it to work with internet explorer! I use firefox so my IE was quite old and it didn't like this, it wouldn't display anything.
I've only tested on IE 7 and above but believe IE 6 will work as well. When I was developing NowPlaying, I noticed that with IE I needed to bring up the web based GUI of squeezebox (or squeezecenter) in IE first and make sure the player for which I wanted the "NowPlaying" display to show selected. Then I made sure to allow IE to use scripting. After that, you should be able to open the "NowPlaying" html and it should then display everything correctly going forward without having to "reset" the browser as described above. I'm not sure if this is because of the multiple players I have in my house or if its an IE thing or a squeezejs thing.
Also, remember, the html is optimized for a 32" wide screen TV so some modifications may be necessary for it look good on your screen.
Thanks for trying it out. I'm glad to see so many people are enjoying it.
For the life of me, I can't figure out how to make this work. I've made several attempts at it the last several weeks, rechecked my settings, refreshed screens, rebooted...and all I get is the blank template, with no data. Interestingly, the clock in the corner is working...although it appears to be working off Central Standard Time instead of CDT. Neither my SB or my computer is set to CST.
I'm running 7.4.1 on a Vista computer hooked up to my TV. Any thoughts?
I’m down to one SB Touch and a Raspberry Pi. Mac Mini as a server (OS X Catalina). iPeng is my controller of choice. LMS 7.9.4. Erland’s plug ins are what keep me in the ecosystem.
For the life of me, I can't figure out how to make this work. I've made several attempts at it the last several weeks, rechecked my settings, refreshed screens, rebooted...and all I get is the blank template, with no data. Interestingly, the clock in the corner is working...although it appears to be working off Central Standard Time instead of CDT. Neither my SB or my computer is set to CST.
I'm running 7.4.1 on a Vista computer hooked up to my TV. Any thoughts?
The clock is a hard-coded applet - you need to hack the Javascript in WORDPAD slightly to change the timezone...that's easy enough.
You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal...
Touch(wired/W7)+Teddy Pardo PSU - Audiolense 3.3/2.0+INGUZ DRC - MF M1 DAC - Linn 5103 - full Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Pekin Tuner, Townsend Supertweeters,VdH Toslink,Kimber 8TC Speaker & Chord Signature Plus Interconnect cables
Stax4070+SRM7/II phones
Kitchen Boom, Outdoors: SB Radio, Harmony One remote for everything.
Bingo! That worked. I was pointing to my SBS Server IP. Guess I misunderstood the instructions.
Thanks!
Also figured out I have to be running SBS on the same browser as the Now Playing screen. Firefox is my default, but this app doesn't work well with it, as previously noted. Switched over to IE and got the blank template again. Opened SBS in IE, and it worked...formatted perfectly and everything.
Now if I can add Trackstat ratings to the display, I'll be in "hog heaven"!
I’m down to one SB Touch and a Raspberry Pi. Mac Mini as a server (OS X Catalina). iPeng is my controller of choice. LMS 7.9.4. Erland’s plug ins are what keep me in the ecosystem.
Now for the big question, has anybody tried this on a web enabled photo frame? There are several 800x600 frames that can access a web page, it seems like they would be an ideal now playing display.
No, but I'd like to. Can anone recommend a suitable photo frame available in the UK? I've had a go with google but can't find anything that sprecifically mentions built in web-browsing, there are plenty with WiFi; do all WiFi photo frames automatically support web browsing?
Awesome! One question, but let me preface; not much into programming...
How do I install this on a ReadyNAS Pro?
EDIT: D'Oh...yeah, I figured it out...
How did you do it on the ReasyNAS Pro? I can't see the folder on there. There doesn't seem to be a root drive as such, just the folders that I've created (and I haven't got anything hidden).
How did you do it on the ReasyNAS Pro? I can't see the folder on there. There doesn't seem to be a root drive as such, just the folders that I've created (and I haven't got anything hidden).
When you open WinSCP, Host name is your ReadyNAS Pro ip address, User name is 'root' and Password is whatever you have set it to when you access the NAS.
When you open WinSCP, Host name is your ReadyNAS Pro ip address, User name is 'root' and Password is whatever you have set it to when you access the NAS.
Thanks for that, now working OK. I did think I was going to have problems getting Now Playing on the screen, as all I got was a blank page, whatever I did. It took me a while to realise thst it should be a capital S in SqueezeJS as wellas the JS!. Once I realised that, everything was OK..
This is great, thank you.
However i do have a small question, on my screen, under artist it shows the composer first followed by the actual artist. Is it possible to get it to only display the album artist?
And if some kind person reading this could post the line that needs to be changed, as i have not got a clue what to do.
Russ.
Has anyone managed to get this to display on a wifi photo frame?
Last edited by RussellMrgn; 2010-12-21, 01:32.
Reason: Photo frame Q
Squeezebox: Classic/SB3, Duet,(Controller x2) Boom x3, Radio and Touch x3
Server: Noah Blk Mini-ITX Case, Intel D945GCLF2 Atom 330 Motherboard, 2 GB 667 RAM, X2 Western Digital Scorpio Blue 500GB 2.5" H/D's Internal.
Ext Backup #1: DAS 200 with X2 Western Digital Caviar Green 1TB H/D's Raided.
OS: WHS.
Ext Backup #2: External USB Hardrive using GoodSync (Backup program).
Ripper: dBpoweramp. (Installed on WHS & Win7)
Running 24/7 Looks good and works well!
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment