My DIY Raspberry Pi music streamer

[Roog]

Given that your starting point is pCP then adding IR control is straight-forward and has a number of options.
See https://docs.picoreplayer.org/components/ir/

I don't know what the OP did but for my simple pCP setup I used a TSOP connected to the GPIO on the Pi and I use a regular Squeezebox remote with it to control Jivelite.

Thank you @paulwebster, 'straight forward' is where i am at!

I will check this out, cheers

[Paul Webster]

I note that you have a remote control with yours, can you please tell me how you added this function?

Given that your starting point is pCP then adding IR control is straight-forward and has a number of options.
See https://docs.picoreplayer.org/components/ir/

I don't know what the OP did but for my simple pCP setup I used a TSOP connected to the GPIO on the Pi and I use a regular Squeezebox remote with it to control Jivelite.

[Roog]

This my Raspberry Pi 3B based music streamer with dual es9033 dac board having CD player functionality. Using 12V 5amp and 5V 5amp linear power supply.
https://youtu.be/o4_02RR5AlQ

Nice work @amanker I have a DIY streamer which I cased in an old Sony cassette deck using Picoreplayer, I note that you have a remote control with yours, can you please tell me how you added this function?

[amanker]

nice!
Which cd player (CD Rom) did you use?

I am using Asus DRW 24F1ST PC internal sata drive.

[Redrum]

really nice work, thanks for showing us, especially with a video! I love clever repurposed items..

Jim

[cubii]

nice!
Which cd player (CD Rom) did you use?

[Greg Erskine]

Looks very well built!

[amanker]

This my Raspberry Pi 3B based music streamer with dual es9033 dac board having CD player functionality. Using 12V 5amp and 5V 5amp linear power supply.

https://youtu.be/o4_02RR5AlQ