[ANNOUNCE] SqueezeButtonPi - Tool to use buttons and rotary encoders on a RPi

[paul-]

That is many years old.

The only extension you need to load is pcp-sbpd.tcz from our repo.

[PaulH]

That's correct. sbpd now uses pigpio instead of wiringpi. If you install pcp-sbpd.tcz from the piCorePlayer respository, it will install pigpio as a dependency. @PaulH - are you using an older version of sbpd from somewhere?

I follow this https://forums.slimdevices.com/showt...l=1#post877437

cd /mnt/mmcblk0p2/tce/optional

wget http://downloads.sourceforge.net/project/picoreplayer/beta/sbpd.tcz.md5.txt

wget http://downloads.sourceforge.net/project/picoreplayer/beta/sbpd.tcz

md5sum sbpd.tcz # make sure the file downloaded correctly
f0157164d10b86325b38fee0cb8d709e  sbpd.tcz

cat sbpd.tcz.md5.txt # does it match the line above?
f0157164d10b86325b38fee0cb8d709e  sbpd.tcz

echo "sbpd.tcz" >> /mnt/mmcblk0p2/tce/onboot.lst

pcp rb  # you must reboot!

[chill]

I read in another thread that wiringPi wasn't used any more with piCorePlayer so I wonder where it came from.

That's correct. sbpd now uses pigpio instead of wiringpi. If you install pcp-sbpd.tcz from the piCorePlayer respository, it will install pigpio as a dependency. @PaulH - are you using an older version of sbpd from somewhere?

[slartibartfast]

I read in another thread that wiringPi wasn't used any more with piCorePlayer so I wonder where it came from.

Sent from my Pixel 3a using Tapatalk

[slartibartfast]

I'm using piCorePlayer 8.1.0

How to display the version ?

No idea but if it came from the pcp repository it "should" be OK. Hopefully someone who knows will comment.

Sent from my Pixel 3a using Tapatalk

[PaulH]

The version for piCorePlayer should be 2.5.4 so it should work with a Pi4.

https://github.com/piCorePlayer/wiringPi/blob/master/VERSION

Sent from my Pixel 3a using Tapatalk

I'm using piCorePlayer 8.1.0

How to display the version ?

[slartibartfast]

[email protected]:/tmp$ gpio -v
-sh: gpio: not found

try to update:
[email protected]:/tmp$ cd /tmp
[email protected]:/tmp$ wget https://project-downloads.drogon.net...gpi-latest.deb
Connecting to project-downloads.drogon.net (188.246.205.22:443)
wget: can't open 'wiringpi-latest.deb': File exists

[email protected]:/tmp$ sudo dpkg -i wiringpi-latest.deb
sudo: dpkg: command not found

The version for piCorePlayer should be 2.5.4 so it should work with a Pi4.

https://github.com/piCorePlayer/wiringPi/blob/master/VERSION

Sent from my Pixel 3a using Tapatalk

[PaulH]

Which version of wiringPi do you have?

http://wiringpi.com/wiringpi-updated-to-2-52-for-the-raspberry-pi-4b/

Sent from my Pixel 3a using Tapatalk

[email protected]:/tmp$ gpio -v
-sh: gpio: not found

try to update:
[email protected]:/tmp$ cd /tmp
[email protected]:/tmp$ wget https://project-downloads.drogon.net...gpi-latest.deb
Connecting to project-downloads.drogon.net (188.246.205.22:443)
wget: can't open 'wiringpi-latest.deb': File exists

[email protected]:/tmp$ sudo dpkg -i wiringpi-latest.deb
sudo: dpkg: command not found

[slartibartfast]

[email protected]:~$ sbpd -d -s b,24,PLAY,2,0 -v
[email protected]:~$

or with:

[email protected]:~$ sbpd -s b,24,PLAY,2,0 -v
1642871394.5050 6 GPIO.c,219: Initializing GPIO
Unable to determine hardware version. I see: Hardware: BCM2711
,
- expecting BCM2708, BCM2709 or BCM2835.
If this is a genuine Raspberry Pi then please report this
to [email protected]. If this is not a Raspberry Pi then you
are on your own as wiringPi is designed to support the
Raspberry Pi ONLY.
[email protected]:~$

It's a real Pi4 !!

Which version of wiringPi do you have?

http://wiringpi.com/wiringpi-updated-to-2-52-for-the-raspberry-pi-4b/

Sent from my Pixel 3a using Tapatalk

[PaulH]

[email protected]:~$ sbpd -d -s b,24,PLAY,2,0 -v
[email protected]:~$

or with:

[email protected]:~$ sbpd -s b,24,PLAY,2,0 -v
1642871394.5050 6 GPIO.c,219: Initializing GPIO
Unable to determine hardware version. I see: Hardware : BCM2711
,
- expecting BCM2708, BCM2709 or BCM2835.
If this is a genuine Raspberry Pi then please report this
to [email protected]. If this is not a Raspberry Pi then you
are on your own as wiringPi is designed to support the
Raspberry Pi ONLY.
[email protected]:~$

It's a real Pi4 !!

[paul-]

And nothing at all is printed on the screen when you enter that command? You should see all of this output.

drop the -d, as you don't want the command to demonize either.

[email protected]:~$ sbpd -s b,24,PLAY,2,0 -v
1642868732.5499 6 sbpd.c,316: Options parsing: Set verbose mode
1642868732.5502 6 sbpd.c,505: Using builtin button configuration
1642868732.5502 6 control.c,108: Adding Command PLAY: Fragment ["pause"]
1642868732.5503 6 control.c,108: Adding Command VOL+: Fragment ["button","volup"]
1642868732.5503 6 control.c,108: Adding Command VOL-: Fragment ["button","voldown"]
1642868732.5504 6 control.c,108: Adding Command PREV: Fragment ["button","rew"]
1642868732.5504 6 control.c,108: Adding Command NEXT: Fragment ["button","fwd"]
1642868732.5504 6 control.c,108: Adding Command POWR: Fragment ["button","power"]
1642868732.5505 6 GPIO.c,312: Initializing GPIO
1642868732.5545 6 control.c,262: Button defined: Pin 24, BCM Resistor: up, Short Type: LMS, Short Fragment: ["pause"] , Long Type: unused, Long Fragment: (null), Long Press Time: 3000
1642868732.5548 6 discovery.c,385: MAC address found: b8:27:eb:d9:dd:0e
1642868732.5548 6 servercomm.c,176: Initializing CURL
1642868732.5699 6 sbpd.c,264: Starting main loop polling
1642868732.5705 6 discovery.c,238: Found server 8D00A8C0. A new address
1642868732.6710 6 discovery.c,349: discovery packet: port: 9000, name: NUC-Devel, uuid: d6d706ce-3908-479c-8158-5c9058697319
1642868732.6712 6 discovery.c,130: Squeezebox control port found: 9000
1642868732.6712 6 discovery.c,149: Server address found: 192.168.0.141

[PaulH]

Are you doing your testing with a keyboard and monitor connected to your pi?

Connect to your device with ssh and then copy and paste into a message here.

https://docs.picoreplayer.org/how-to...s_pcp_via_ssh/

It's connected by SSH with Terminal on my MAC

I sent this command:
[email protected]:~$ sbpd -d -s b,24,PLAY,2,0 -v

[paul-]

Are you doing your testing with a keyboard and monitor connected to your pi?

Connect to your device with ssh and then copy and paste into a message here.

https://docs.picoreplayer.org/how-to/access_pcp_via_ssh/

[PaulH]

Post the output of the command.

How ?

I hope you are using a button and not just touching wire and pins.

yes there is a switch between PIN24 and GND

[paul-]

Post the output of the command. I hope you are using a button and not just touching wire and pins. There is debounce in the software. But you would see that if you look at the output.