I'm a newbie. I had a problem outputting audio to a Samsung TV via HDMI. If I set the HDMI audio output, Squeezelite turn off. and i can't turn it on
-
-
More information is required to offer assistance
which raspberry pi
which PCP version
and which lms version will do for starters
ronnie -
click on the red word more and report the output devices
ronnieComment
-
Based on the first screen shot, alsaequal is installed. I can't take a screen shot right now, but the output devices that is used for alsaequal is on the tweaks page. Right where you would configure alsaequal.piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please donate if you like the piCorePlayerComment
-
PI 3 B+Originally posted by Man in a van View PostMore information is required to offer assistance
which raspberry pi
which PCP version
and which lms version will do for starters
ronnie
PCP v8.1(piCore v13.1)
squerzelite v1.9.9-1403-pCPComment
-
when sqeezelite is turned off, this option not activeOriginally posted by paul- View Post
and i can't see any player into LMS too
Comment
-
@evilviva
go to the tweaks page and enable and then save
then enable and save the output device
ronnieComment
-
It should then just work
ronnieComment
-
-
My screen shots were on a rpi3B+ which you said you are using
Your screen shot suggests to me that it is a rpi4b
ronnieComment
-
you flatter me ... no, unfortunately it's 3b +Originally posted by Man in a van View PostMy screen shots were on a rpi3B+ which you said you are using
Your screen shot suggests to me that it is a rpi4b
ronnieComment
-
There seems to be more to the story. The device output you have chosen is not for plain HDMI audio.
What are you trying to achieve on your TV?
What steps have you done?
What software options have you added?piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please donate if you like the piCorePlayerComment
-
I want to use TV as a display and at the same time as a sound systemOriginally posted by paul- View Post
I plan to use hdmi-cec for control in the future. now I output the pcp screen to the TV via HDMI.
changed 2 parameters:
hdmi_force_hotplug = 1
hdmi_drive = 2.
HDMI audio transmission causes problems
Sorry for my EnglishComment
-
I think you need to use the IEC device when reconfigured for CECPaul Webster
Author of "Now Playing" plugins covering Radio France (FIP etc), PlanetRadio (Bauer - Kiss, Absolute, Scala, JazzFM etc), KCRW, ABC Australia and CBC/Radio-Canada
and, via the extra "Radio Now Playing" plugin lots more - see https://forums.slimdevices.com/showt...Playing-pluginComment
-
Comment