PDA

View Full Version : TP digital input ugly noise



michel
2012-12-26, 09:53
Being a Transporter user for years I used the optical input the first time. It worked as it should until I shut down the source. I heard some nasty grainy noise that did not alter when changing volume. It disappeared immediately when powering on the source player. The same effect occurs when removing cable. All other inputs show the same behavior.

michel
2012-12-27, 04:26
I wanted to add that my Transporter is directly connected to my power amp.
If connected via preamp the noise would be attenuated and thus be barely noticeable unless the volume was cranked up.

Could some TP users please switch to an input that has nothing connected to it and report back?

Thank you!

garym
2012-12-27, 06:32
I wanted to add that my Transporter is directly connected to my power amp.
If connected via preamp the noise would be attenuated and thus be barely noticeable unless the volume was cranked up.

Could some TP users please switch to an input that has nothing connected to it and report back?

Thank you!

I'll try to remember to test this on my return home after the holidays.